- Pro Audio Home >
- >
Online Store
These accessories and factory original replacement parts are available for purchase now:
Microphone Accessories
Wireless Accessories

X2u XLR-to-USB Signal Adapter
Connect any XLR microphone to a computer for digital recording with headphone monitoring.
A100WS Foam Windscreen
Foam Windscreen for KSM141 and KSM137 Microphones.
A109ZB carrying bag
(Discontinued) Zippered Carrying Bag for KSM109 Microphone.
A12 Mounting Flange
Mounting Flange, 5/8''-27 Threaded.A120S In-Line On/Off Switch
In-line, balanced, locking or momentary switch for a microphone. Note: Requires soldering.

A137C Carrying case
Carrying Case for one KSM137 Microphone.
A137SPC Carrying Case
Carrying Case for two KSM137 Microphones.
A13HD and A13HDB Heavy Duty Mounting Flanges
Mounting Flange, Heavy Duty, Black or Silver.
A141C Carrying Case
Carrying Case for one KSM141 Microphone.
A141SPC Carrying Case
Carrying Case for two KSM141 Microphones.A15AS In-line Switchable Attenuator
Switchable in-line attenuator reduces the level of any balanced microphone or line-level signal by 15, 20, or 25 dB.
A15BT Bridging Transformer
Matches, bridges, or isolates balanced and unbalanced devices of different impedances and levels. Male XLR to female XLR.
A15HP In-Line High Pass Filter
Balanced XLR in-line filter that reduces low frequencies below 100 Hz.
A15LA 50dB Attenuator
Reduces the level of an audio signal by 50dB, which allows a line level output to be connected to a microphone input.
A15PRS Switchable Phase Reverser
Reverses the phase (polarity) of a balanced audio signal. It can correct polarity reversal caused by a wiring error in a microphone cable and reduce comb filtering between two signals.
A15RF In-Line RF Interference Attenuator
Reduces interference from AM radio stations that may bleed into microphone lines when using long cables.
A15TG Tone Generator
Battery-powered 700 Hz signal source used to troubleshoot audio systems by checking microphone lines for correct patching and detecting unusual noise that is present.

A16R Rack Panel
(Discontinued) Rack Panel For FP16A, FP42 and FP51.A1K Anti-Roll Ring for Handheld Microphones
Prevents handheld microphones and transmitters from rolling off a desk, podium, or other flat surface.
A1WS Microphone Windscreen
Reduces unwanted breath and wind noise. For use with the Shure Beta56, Beta57, and all 515 Series microphones.
A202BB Microphone Desk Stand
Converts the Shure MX202 Overhead Microphone into a low-profile gooseneck microphone for use on a desk or tabletop.

A24QG Gooseneck Microphone Accessory Kit
Accessory conversion kit for use with the Shure AMS24 Gooseneck Microphone. When properly installed, it permits the AMS24 to be used as an easily disconnected XLR connector mount.A25D Microphone Clip
Securely mounts the SM58, SM57, SM87A, Beta 87A and all other microphones with 3/4-inch and larger handles to a standard microphone stand.

A25DM Break Resistant Mount
Package of 10 A25D break resistant mounts.A25E Microphone Clip (for KSM9)
Securely mounts the Shure KSM9 microphone to a standard microphone stand.

A268R Rack Panel
(Discontinued) Rack Panel Kit designed to mount a Shure Model M267 or M268 Microphone Mixer in a standard 19-inch (483 mm) audio equipment rack.A26M Dual Microphone Mount
Allows two Shure SM57, Beta 57A, or 545 Series microphones to be placed vertically on a standard microphone stand.

A26X Desk Stand Extension Tube
Desk Stand Extension Tube, 3-inch (7.6 cm) for Desk Stands (Also Adapts Beta 56 to Various Mounting Devices)A27M Stereo Microphone Adapter
Stereo microphone adapter designed to hold two microphones in selectable positions for stereo broadcasting, recording or sound reinforcement.
A27SM Elastic Suspension Shock Mount
Elastic suspension shock mount for use with Shure SM27 and KSM27 microphones.

A27VB Velveteen Pouch
(Discontinued) Pouch, Velveteen, for KSM27 Microphone.A2WS Locking Microphone Windscreen
Reduces unwanted breath and wind noise. For use with Shure SM57 and 545 Series microphones. Available in black and gray.

A313M Custom Swivel Monocle Mount
Custom swivel Monocle Mount for use with the KSM313.
A313SM Elastic Suspension Shock Mount
Elastic suspension shock mount for use with the KSM313.A32M Swivel Mount
Securely mounts Shure side-address, large diaphragm microphones to standard microphone stands. For use with Shure KSM27, KSM32, and KSM44 microphones. Available in black.

A32SC Aluminum Carrying Case
Carrying Case, Aluminum, for KSM32 Microphone.A32SM Elastic-Suspension Shock Mount
Elastic suspension shock mount for use with Shure KSM32 microphones.

A32VB Velveteen Pouch
Pouch, Velveteen, for KSM32 MicrophoneA32WS Microphone Windscreen
Reduces unwanted breath and wind noise. For use with Shure SM27, KSM27, KSM32 and KSM44 microphones. Available in black.
A32ZB Microphone Carrying Bag
Padded zippered carrying bag for Shure SM27, KSM27, KSM32 and KSM44 microphones.

A353SM Spring-Loaded Suspension Shock Mount
Spring-loaded suspension shock mount for use with the KSM353.
A367R Rack Panel
(Discontinued) Rack Panel for M367 Mixer.
A3WS Microphone Windscreen
Reduces unwanted breath and wind noise. For use with the Shure KSM109/SL, PG81, and SM94 microphones. Available in black.

A400SM, A400XLR, A400SMXLR and A99SMA Shock Mounts
The A400SM, A400XLR, A400SMXLR and A99SMA are accessories that allow permanent installation of a quick-release shock mount for use with a wide variety of gooseneck microphones.
A412B Desktop Base
Shure A412B microphone base allows gooseneck mics to be quickly mounted when permanent installation is impractical. Angled XLR input connector maintains a low profile. Ample room for custom circuitry. Includes cable.A412MWS Locking Metal Windscreen
Reduces unwanted breath and wind noise. For use with Shure Microflex gooseneck microphones. Available in black.
A44M Swivel Microphone Mount
Securely mounts Shure side-address, large diaphragm microphones to standard microphone stands. For use with Shure KSM44 microphones. Available in champagne.

A44SC Aluminum Carrying Case
Aluminum Carrying Case for KSM44 Microphone.A44SM Elastic-Suspension Shock Mount
Elastic suspension shock mount for use with Shure KSM44 microphones.



























