SM57 and X2u USB Digital Bundle

SM57+X2u USB Digital Bundle

The legendary SM57 cardioid dynamic instrument microphone is now available with the X2u USB Signal Adapter, which features built-in headphone monitoring with zero latency, and easy controls to balance microphone and playback audio.  Digitally record wherever and whenever your computer takes you - just plug and play for better-than-CD quality instrument reproduction.

Critical Mac OS X Driver for X2u
Important information regarding critical drivers and updates for the X2u XLR-to-USB Signal Adapter
SM57 and X2u USB Digital BundleLegendary SM57 with X2u USB Signal Adapter for digital recording applications.SM57 and X2u USB Digital Bundlesite_image_sm57_x2u_s
SM57
  • Dynamic microphone cartridge with tailored frequency response delivers clear reproduction of amplified and acoustic instruments
  • Uniform cardioid polar pattern isolates the sound source while minimizing background noise
  • Internal pneumatic shock mount minimizes handling noise
  • Legendary construction and versatility for consistent performance under rugged use and abuse on stage or in the studio.

 

X2u
  • Plug and Play USB Connectivity allows the convenience of digital recording anywhere your computer can go (compatible with Windows Vista, XP, 2000, and Mac OS X 10.1 or later).
  • Integrated pre-amp with Microphone Gain Control allows control of input signal strength
  • Zero Latency Monitoring for real-time playback and multi-tracking without disorientation
  • Headphone jack for monitoring with 1/8” connectivity
  • Monitor Mix Control for blending microphone and playback audio
  • 16 bit, up to 48 kHz sample rate for better-than-CD quality audio

SM57

Spec Sheet (PDF)

 

Type
Dynamic

 

Frequency Response
40 to 15,000 Hz

 

Pro Audio SM57 Response Curveview larger

Polar Pattern
Unidirectional (cardioid), rotationally symmetrical about microphone axis, uniform with frequency.

Sensitivity (at 1,000 Hz)
Open Circuit Voltage: -56.0 dBV/Pa* (1.6 mV)
*(1 Pa = 94 dB SPL)

Impedance
Rated impedance is 150 ohms (310 ohms actual) for connection to microphone inputs rated low impedance.

Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3.

Connector
Three-pin professional audio connector (male XLR type).

Case
Dark gray, enamel-painted, die-cast steel with a polycarbonate grille and a stainless steel screen.

Dimensions
See User Guide.

Net Weight (without cable)
284 grams (10 oz)

 

 

X2u

Spec Sheet (PDF)

 

Frequency Response
20 to 20,000 Hz +/- 1 dB

 

Power Requirements
USB-powered, 500 mA, maximum

 

Digital Noise Floor (20 Hz to 20 kHz, A-weighted)
Minimum MIC GAIN setting: −81 dB FS
Maximum MIC GAIN setting: −78 dB FS

 

Sampling Rate
up to 48 kHz

 

Bit Depth
16 bit

 

Peak Signal Indicator (Tri-color)
OFF: −30 dB FS
Green: −30 to −12 dB FS
Yellow: −12 to 0 dB FS
Red: >0 (digital converter clipped)

 

Adjustable Gain Range
40 dB

 

Headphone Output
3.5 mm (1/8 inch)

A2WS Locking Microphone Windscreen

Reduces unwanted breath and wind noise. For use with Shure SM57 and 545 Series microphones. Available in black and gray.


A25D Microphone Clip

Securely mounts the SM58, SM57, SM87A, Beta 87A and all other microphones with 3/4-inch and larger handles to a standard microphone stand.


A26M Dual Microphone Mount

Allows two Shure SM57, Beta 57A, or 545 Series microphones to be placed vertically on a standard microphone stand.


A55HM Snap-in "Shock Stopper" Mount

Shock Stopper Isolation Mount/Swivel Adapter, Half Mount, for SM57, SM58, Beta 57A, Beta 58A, Beta 87A, Beta 87C or any Shure tapered handle mic.

A55M Shock Mount Microphone Clip

Isolation mount and swivel adapter securely attaches Shure models SM57, SM58, SM86, Beta57A, Beta58A, Beta87A, and Beta87C to standard microphone stands.


A81WS Large Foam Microphone Windscreen

Reduces unwanted breath and wind noise. For use with the Shure end address microphones such as the Shure SM81, and SM57. Available in gray.


R57 Cartridge for SM56 and SM57

R57 Replacement Cartridge for Shure SM56 and SM57 Microphones.

RK244G Screen and Grille for SM57

Replacement screen and grille assembly for the Model SM57 microphone consisting of the complete screen and grille assembly, an extra retainer ring, and nameplate.


Release 38