- Pro Audio Home >
- >
- >
UR2/BETA58 with Beta 58A Supercardioid Microphone
UHF-R Wireless Handheld Transmitter with Beta 58A Supercardioid Microphone.
UHF-R Wireless Handheld Transmitter with Beta 58A Supercardioid Microphone.
Beta58A® Vocal Microphone
The Beta 58A microphone accentuates the warmth and clarity of lead and backup vocals. Its supercardioid design provides maximum isolation from other onstage sounds.
- Supercardioid, Dynamic
- Frequency response: 50 to 16,000 Hz
- Neodymium magnet for high signal–to–noise output
UR2 Handheld Transmitter
- RF Carrier Frequency Range: 470 – 952 MHz
- Switchable RF Power (10/50 mW), country dependent
- Battery Life: Up to 9.5 hours continuous use
- More
Download Spec Sheet in pdf format
Frequency Range and Transmitter Output Power
| Band | Range | Handheld Transmitter power (mW) |
|
G1 |
470-530 MHz | 10 / 50 |
|
H4E, H4 |
518-578 MHz | 10 / 50 |
|
J5E, J5 |
578-638 MHz (578-608, 614-638) |
10 / 50 |
| L3E, L3 | 638-698 MHz | 10 / 50 |
| Q6 | 740-752 MHz | 10 |
| Q10 | 740-798 MHz | 10 / 50 |
| Q5 | 740-814 MHz | 10 / 50 |
| A24 | 779-788 / 797-806 MHz | 10 |
| R9 | 790-865 MHz | 10 / 50 |
| JBX | 806-810 MHz | 10 |
| X1 | 944-952 MHz | 10 / 50 |
RF Carrier Frequency Range
470-952 MHz, depending on region
Working Range
150 m (500 ft.), under typical conditions
500 m (1600 ft) line-of-sight, outdoors
for a single system
NOTE: Actual working range depends on RF signal absorption, reflection and interference
Audio Frequency Response
40 – 18,000 Hz,(+1 dB, –3 dB).
NOTE: Overall system frequency response depends on the microphone element
Gain Adjustment Range
UR2: –10 to +20 dB
Modulation
FM (45 kHz max. deviation), compander system with pre- and de-emphasis
RF Power Output
See table above.
Dynamic Range
>105 dB, A-weighted
Signal Polarity
Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on XLR output pin 2 with respect to XLR pin 3 and on the tip of the 1/4-inch output jack.
System Distortion (ref. ± 45 kHz deviation, 1 kHz modulation)
<0.3% Total Harmonic Distortion typical
Power Requirements
UR2: Two 1.5V AA batteries
Current Drain
UR2: 180 mA max. (normal RF power setting)
240 mA max. (high RF power setting)
Battery Life (Typical)
UR2: 9.5 hours (low power)
6 hours (high power)
Operating Temperature Range
18° to +57° C (0° to +135° F)
NOTE: Battery characteristics may limit this range
NOTE: Electrical safety approval is based on a maximum ambient temperature of 35°C (95°F).
Overall Dimensions
UR2/BETA 58: 258 mm L x 51 mm Dia. (10.15 x 2 in.)
Net Weight
UR2/BETA 58: 314 g (11.1oz.) without battery
Housing:
UR2: Aluminum die-cast handle and aluminum machined battery cup
UR2 Transmitter Audio Input
| Input Configuration: | Unbalanced, active |
| Actual Impedance: | >1 MΩ |
|
Maximum Input Level: 1 kHz, 1% THD |
+4.8 dBu |
UR2 Transmitter RF Output
| Connector: | SMA |
| Actual Impedance: | 50 Ω |
| Pin Assignments: | Shell = Ground
Center = Signal |
A58WS Microphone Windscreen
Reduces unwanted breath and wind noise. For use with all larger Shure ''ball-type'' microphones including the SM58, Beta58A, SM48, and the 565SD. Available in 6 colors; black, blue, gray, green, red, and yellow.
MS-10C Chrome Floor Stand
Chrome floor stand with gray metallic base quickly and easily adjusts from 35 inches (87.5 cm) to 64 inches (160 cm) high.
RK265G Factory Original Beta 58A Replacment Grille
Factory original dent-resistant replacement grille for Shure Beta58A wired microphones and wireless transmitters.
WA371 Wireless Microphone Clip
Securely mounts the Shure wireless handheld transmitters to standard microphone stands.