Software & Firmware Archives

Important

• ULXD4D and ULXD4Q receivers running firmware prior to 1.4.8 must be updated to 1.4.8 before updating to newer versions.
• ULXD4D and ULXD4Q receivers running firmware between 1.4.8 and 2.0.28 must be updated to 2.0.28 before updating to newer versions.
• After 2.0.28 is installed, ULXD4D and ULXD4Q receivers can be updated to the latest available firmware version.
• ULX-D devices that are downgrading to 1.5.6 may report a false failure.
  • Workaround: Because this is a false failure, closing the send updates window and going to the main page, Shure Update Utility will show green for the firmware version.

New Features

• AMX/Crestron control (full documentation here)
• High Density mode (notes on Frequency Coordination for ULX-D High Density channels)
• Dual and Quad receiver compatibility

Improvements

• Extended control of several parameters within Wireless Workbench, including Frequency Diversity Bodypack Source Indication (for ULX-D Dual and Quad receivers only)
• Various system and component bug fixes and improvements

Notes

• For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.2.14:
  • ULXD1/2 ULXD Transmitters 1.2.14
  • ULXD4, ULXD4D, ULXD4Q ULX-D Receivers 1.2.14
  • Wireless Workbench 6 Beta version 6.4.0

Important

• ULXD4D and ULXD4Q receivers running firmware prior to 1.4.8 must be updated to 1.4.8 before updating to newer versions.
• ULXD4D and ULXD4Q receivers running firmware between 1.4.8 and 2.0.28 must be updated to 2.0.28 before updating to newer versions.
• After 2.0.28 is installed, ULXD4D and ULXD4Q receivers can be updated to the latest available firmware version.
• ULX-D devices that are downgrading to 1.5.6 may report a false failure.
  • Workaround: Because this is a false failure, closing the send updates window and going to the main page, Shure Update Utility will show green for the firmware version.

New Features

• AMX/Crestron control (full documentation here)
• High Density mode (notes on Frequency Coordination for ULX-D High Density channels)
• Dual and Quad receiver compatibility

Improvements

• Extended control of several parameters within Wireless Workbench, including Frequency Diversity Bodypack Source Indication (for ULX-D Dual and Quad receivers only)
• Various system and component bug fixes and improvements

Notes

• For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.2.14:
  • ULXD1/2 ULXD Transmitters 1.2.14
  • ULXD4, ULXD4D, ULXD4Q ULX-D Receivers 1.2.14
  • Wireless Workbench 6 Beta version 6.4.0

Improvements

• Improved front panel menu and display
• Improved metering accuracy

Notes

• For operation of PSM1000 devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with PSM1000 version 1.3.6:
  • Axient devices 1.9.2
  • ULX-D devices 1.2.14
  • Wireless Workbench 6 Beta version 6.4.0

Version 5.6.45 is compatible to Firmware Release 6.8.9 only and is not compatible with previous firmware versions

Bug Fix

Corrects an error in the database update scrips for updating databases on SQL 2005 server

Version 5.6.53 is compatible to Firmware Release 6.8.9 only and is not compatible with previous firmware versions

Bug Fixes

• Group speech time error corrected
• CDA individual voting results - group column to small.
• "Print Results" button not visible until a re-vote on a subject has been done
• "Print Results" button is now disabled when no active conference
• Printing is now possible when no subject is active
• CUA Messaging: A bracket "]" is wrongly added to each message
• Speaker Change doesn't work as expected
• Cannot add new CDA configuration
• Quorum on Voting Configuration makes CUI fail to operate correctly
• Speech Time Alarm is shown even when disabled in config
• Unable to generate voting reports if a voter has a group with a long abbreviation
• ECA crash if no setting for com port 1 and no comport in shortcut

Release Date: 8/31/2012

Version 5.6.55 is compatible to Firmware Release 6.8.9 only and is not compatible with previous firmware versions

Bug Fix

Speakers Request queue problem corrected

Version 5.6.56 is compatible to Firmware Release 6.8.9 only and is not compatible with previous firmware versions

Bug Fixes

• Conference log report logout time error
• Error messages when creating new Agenda Subject Configuration
• After a speaker have been activated on Podium the Mic on/off controls in CUA Microphone screen are indicated wrong

NEW FEATURES

• Transmitter Overload indicator
  • Indication from the transmitter is available via ShowLink when the audio input circuitry is overloaded. Previously displayed only on the transmitter, this alert now appears on the AXT400 front panel display and is available in Wireless Workbench 6 monitoring views when the transmitter is online.

IMPROVEMENTS

• Confirmation for interference-prompted frequency switches when transmitter is offline
  • Additional prompt to avoid unintentionally changing frequency when a linked transmitter is not online to follow the change

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.10.2:
  • UR4 UHF-R receiver 1.166
  • UR3 Plug-on Transmitter 1.0.0.9
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4 ULXD Receiver 1.2.14
  • P10T PSM1000 Transmitter 1.3.4
  • Wireless Workbench 6 Beta version 6.5.0

NEW FEATURES

• Transmitter Overload indicator
  • Indication from the transmitter is available via ShowLink when the audio input circuitry is overloaded. Previously displayed only on the transmitter, this alert now appears on the AXT400 front panel display and is available in Wireless Workbench 6 monitoring views when the transmitter is online.

IMPROVEMENTS

• Confirmation for interference-prompted frequency switches when transmitter is offline
  • Additional prompt to avoid unintentionally changing frequency when a linked transmitter is not online to follow the change

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.10.2:
  • UR4 UHF-R receiver 1.166
  • UR3 Plug-on Transmitter 1.0.0.9
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4 ULXD Receiver 1.2.14
  • P10T PSM1000 Transmitter 1.3.4
  • Wireless Workbench 6 Beta version 6.5.0 Beta

NEW FEATURES

• Tone key selection options to allow only Axient or only UHF-R transmitters for receiver audio
  • Additional options to protect the receiver from unintended transmitters
  • Default Tone Key setting automatically detects Axient or UHF-R tone key to activate the corresponding audio scheme
  • In Frequency Diversity – Bodypack mode, the receiver selects away from a radio channel receiving the wrong tone key
• In Ear Monitor signal detection
  • The receiver can identify signals from In Ear monitor transmitters, triggering Interference Detection and Avoidance even in FM capture scenarios where the IEM carrier is much stronger than the desired signal
  • Alerts in ‘Prompt’ Interference Detection mode indicate that the interfering signal is from an IEM system
  • Detects all Shure and most competitive IEM systems

IMPROVEMENTS

• Confirmation for interference-prompted frequency switches when transmitter is offline
  • Additional prompt to avoid unintentionally changing frequency when a linked transmitter is not online to follow the change

KNOWN ISSUES

• When controlling Axient devices with command Strings, only a single socket should be opened per device.

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.10.2:
  • UR4 UHF-R receiver 1.166
  • UR3 Plug-on Transmitter 1.0.0.9
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4x ULX-D Receivers 1.2.14
  • P10T PSM1000 Transmitter 1.3.4
  • Wireless Workbench 6 Beta version 6.5.0