Shure

Lithium-ion battery for SLX-D Wireless Transmitters

SB903 User Guide

SB903 Declarations of Conformity (EU)

SLX-D

Want to know the exact amount of battery charge left? SB903 rechargeable lithium-ion batteries unlock real-time battery life and battery health features for SLX-D Digital Wireless transmitters.

SB903

SB903, 

SBC10-903 User Guide

SBC10-903, SBC10-903-E, SBC10-903-UK Declarations of Conformity (EU)

USB single battery charger can be powered from A/C power sources and USB ports to charge one Shure SB903 Lithium-Ion Rechargeable Battery for use with SLX-D Digital Wireless Transmitters.

SBC10-903

SBC10-903, 

Single battery charger for SB903 Battery

SBC10-903-UK

SBC203 User Guide

SBC203 Declarations of Conformity (EU)

Dual docking recharging station charges two SB903 lithium-ion batteries in or out of their transmitters. Built to charge two batteries, two body pack transmitters, two handheld transmitters or any pairing of two SLX-D transmitters or SB903 batteries.

SBC203

SBC203, 

Dual Docking Recharging Station for SB903 Lithium-Ion Battery

SBC203-UK

Coaxial Cable              

UA850 Declarations of Conformity (EU)

50-foot coaxial cable is for use below 1GHz.

UA850

The Coaxial Cable is for use below 1GHz, 50 ft length (15 m)


BNC-BNC Coaxial Low Loss RF Cable for use between 1 and 2 GHz, 50 Ohm, 50 ft length (15m)

UA850Z

HA-8089 Helical Antenna

HA8089 Declarations of Conformity (EU)

Helical antenna provides greater bandwidth and longer range gain for receivers, transmitters, and distribution systems.

Stage Monitoring

Wideband UHF (470-900 MHz) Remote Antenna for Shure UHF Receivers, PSM Transmitters and Antenna Distribution Systems.

HA-8089

Hotel & Convention

Stage & Event

Theater Stage

Front Mount Antenna Kit            

UA600 User Guide

Front mount antenna kit includes 2 coaxial cables and 2 bulkhead adapters.

UA600

Antenna Kit, front mount, for SLX4, UR4S, UR4D and ULX single receivers, includes 2 coaxial antenna cables and 2 bulkhead adapters.

Passive Antenna Splitter             

UA221Z User Guide

UA221 CAD

UA221 User Guide

Passive antenna splitter splits an incoming signal into 2 outgoing signals or combines 2 incoming signals into 1 signal.

Passive antenna splitter splits an incoming signal into 2 outgoing signals or combines 2 incoming signals into 1 signal. The kit includes 2 UA221 Splitters/Combiners, 4 coaxial cables, and attaching hardware.

UA221

Antenna Splitter/Combiner Kit, Passive, for UC4, SLX4, ULXS4, ULXP4, U4S, U4D, UR4S and UR4D.

UA221Z Passive Antenna Splitter, 1000–2000 MHz

UA221Z

UA806 Declarations of Conformity (EU)

6-foot coaxial cable offers BNC to BNC connection.

UA806

Coaxial Cable, BNC-BNC, RG58C/U type, 50 Ohm, 6 ft length (2 m).

UA825 Declarations of Conformity (EU)

25-foot coaxial cable offers BNC to BNC connection.

UA825

The Coaxial Cable is for use below 1GHz, 25 ft length (7.5 m).


BNC-BNC Coaxial Low Loss RF Cable for use between 1 and 2 GHz, 50 Ohm, 25 ft length (7.5m).  


UA825Z

UA8100 Declarations of Conformity (EU)

100-foot coaxial cable offers BNC to BNC connection.

UA8100

The Coaxial Cable is for use below 1GHz, 100 ft length (30 m).


BNC-BNC Coaxial Low Loss RF Cable for use between 1 and 2 GHz, 50 Ohm, 100 ft length (30m).


UA8100Z

UA802 Declarations of Conformity (EU)

2-foot coaxial cable offers BNC to BNC connection.

UA802

Coaxial Cable, BNC-BNC, RG58C/U type, 50 Ohm, 2 ft length (0.6 m).

The Shure PA805 is a directional antenna for increased range and reduced interference as compared to omnidirectional 1/2-wave antennas.

The PA805 can be mounted on a microphone stand or mounted to a wall using the integral swivel adapter bracket.

Directional Antenna              

PA805 CAD File

PA805Z2-RSMA CAD

PA805 User Guide

PA805SWB User Guide

PA805X User Guide

PA805 Declarations of Conformity (EU)

Touring/Rental

Directional wideband antenna offers 6 dB of gain.

PSM 1000

PSM 900

PSM 300

Directional antenna for increased range and reduced interference as compared to omnidirectional 1/2-wave antennas.

PA805

PA805, 

PA805SWB

Directional Antenna, 1240-1930 MHz

PA805Z

Omnidirectional Antenna              

UA860SWB CAD

UA860SWB User Guide

UA860 Declarations of Conformity (EU)

<ul>
	<li>Greatly improves reception of wireless signal from BLX4R, SLX, QLX-D, ULX-D, UHF-R and Axient Wireless Systems.</li>
	<li>Omnidirectional dipole reception pattern</li>
	<li>Includes stand adapter, thread adapter, a 61cm (2ft) coaxial antenna cable, and a 7.6m (25ft) coaxial antenna cable</li>
</ul>

The Shure UA860SWB is a passive wide band UHF omnidirectional antenna. 

The Shure UA860SWB is a passive wide band UHF omnidirectional antenna. For use with certain Shure wireless products.

UA860SWB

The UA505 Remote Antenna Mounting Bracket Kit lets you mount a 1/2 wave receiver antenna away from the receiver or the equipment rack. This kit includes one mounting bracket, a bulkhead adapter, and bulkhead adapter nut.  Note: Antennas and bracket mounting hardware (screws, washers, and nuts) are not included in this kit.

UA505 Antenna Mounting Bracket Kit

UA505-RSMA User Guide

UA505 User Guide

Antenna mounting bracket kit includes 1 mounting bracket, bulkhead adapter, and bulkhead adapter nut for remote antenna mounting.

Antenna Mounting Bracket and BNC adapter for remote antenna mounting.

UA505

Active Antenna/Power Distribution System, five-way, wideband VHF and UHF, internal power supply. Five-Way Active Antenna Splitter and Power Distribution System for U4S, UR4S, U4D, and UR4D receivers, AD4, ULXD4, UXLD4D, ULXD4Q receivers, SLX4, BLXR4 and QLXD4 receivers.

The Shure Model UA845UWB is an amplified, VHF and UHF Antenna Distribution System that expands a wireless microphone system by splitting one pair of antennas to multiple Shure Axient Digital, UHF-R, ULX-D, BLX4R, SLX4 and BLX4R. It also amplifies RF signals to compensate for insertion loss due to splitting signal power to multiple output connectors. Each UA845UWB allows up to four receivers to use the same antennas. CASCADE connectors allow connections to a fifth receiver or a second UA845UWB.

Expandability. The UA845UWB Antenna Distribution System is designed for large Axient Digital, UHF-R, ULX-D&trade;, QLX-D, SLX, BLX4R wireless systems. Each unit allows up to four wireless receivers to use the same two antennas, and the CASCADE ports allow connection to a fifth receiver or a second UA845UWB.

Compatibility. The UA845UWB is compatible with all Shure Axient Digital, UHF-R, ULX-D, SLX, BLX4R, QLX-D wireless microphone receivers operating within a compatible frequency range (see UHF Carrier Frequency Ranges in the Specifications section).

CASCADE Ports. Two 50 &Omega;, BNC-type antenna CASCADE ports allow an additional UA845UWB unit or a fifth wireless receiver. A large wireless system can be run off of a single pair of antennas.

Power OUTPUT and OUT Connectors for Shure UHF and UHF-R&reg; Wireless systems. Up to five U4 or UR4 receivers can be daisy-chained and powered from a single source via the Power OUTPUT connectors. DOES NOT APPLY TO ULX or ULX-D.

Active Antenna/Power Distribution System, five-way, VHF, UHF, 1.2, 1.5, and 1.8 GHz, internal power supply.

UA845UWB is also available without cable.

Antenna Distribution System             

UA845UWB User Guide

UA845UWB Declarations of Conformity (EU)

Antenna distribution system expands a wireless microphone system by splitting 1 pair of antennas and amplifies RF signals.

UA845UWB

Active Antenna/Power Distribution System, UK Power Supply

UA845UWB-UK

Active Antenna/Power Distribution System, five-way, wideband VHF and UHF, internal power supply. Five-Way Active Antenna Splitter and Power Distribution System for AD4, U4S, UR4S, U4D, and UR4D receivers, ULXD4, UXLD4D, ULXD4Q receivers, SLX4, BLXR4 and QLXD4 receivers.

The Shure Model UA845UWB is an amplified, VHF and UHF Antenna Distribution System that expands a wireless microphone system by splitting one pair of antennas to multiple Shure Axient Digital, UHF-R, ULX-D, BLX4R, SLX4 and BLX4R. It also amplifies RF signals to compensate for insertion loss due to splitting signal power to multiple output connectors. Each UA845UWB allows up to four receivers to use the same antennas. CASCADE connectors allow connections to a fifth receiver or a second UA845UWB.

Expandability. The UA845UWB Antenna Distribution System is designed for large Axient Digital, UHF-R, ULX-D™, QLX-D, SLX, BLX4R wireless systems. Each unit allows up to four wireless receivers to use the same two antennas, and the CASCADE ports allow connection to a fifth receiver or a second UA845UWB.

Compatibility. The UA845UWB is compatible with all Shure Axient Digital, UHF-R, ULX-D, SLX, BLX4R, QLX-D wireless microphone receivers operating within a compatible frequency range (see UHF Carrier Frequency Ranges in the Specifications section).

CASCADE Ports. Two 50 Ω, BNC-type antenna CASCADE ports allow an additional UA845UWB unit or a fifth wireless receiver. A large wireless system can be run off of a single pair of antennas.

Power OUTPUT and OUT Connectors for Shure UHF and UHF-R® Wireless systems. Up to five U4 or UR4 receivers can be daisy-chained and powered from a single source via the Power OUTPUT connectors. DOES NOT APPLY TO ULX or ULX-D.

UA845UWB/LC is also available with cable.

UA845UWB/LC

Active Antenna/Power Distribution System, UK Power Supply

UA845UWB/LC-UK

UA834&nbsp;replaces UA830. In-Line UHF Antenna Amplifier for remote mounting antennas with BLX4R, SLX4, QLX-D, ULX-D, UR4 and AXT400 receivers or UA844+ and UA845UWB Antenna Distribution Systems. (470 - 952 MHz)

The Shure UA834&nbsp;is a low-noise, in-line VHF and UHF antenna amplifier. It is intended for remote-mounting antennas to a Shure receiver or Model UA845UWB, or UA844+ distribution amplifier in a large installation.

The unit receives power through its output port from the Shure receiver, UABIAST or distribution amplifier. When an antenna is remote mounted, the UA834&nbsp;amplifies the received radio signals to compensate for insertion loss in the coaxial cable. A gain selector switch adjusts for longer lengths of coaxial cable.

In-Line Antenna Amplifier             

UA834 User Guide

UA834 CAD

UA834WB Declarations of Conformity (EU)

<ul>
	<li>Compatible with the Shure Model UR4 ULX wireless microphone receiver and the Shure Model UA845UWB, or UA844+ Antenna Distribution System.</li>
	<li>Mountable on supplied desk-/wall-mount or on a microphone stand.</li>
	<li>Two-position gain selector switch to adjust for longer coaxial cable lengths (6dB position for cables under 7 1/2m [25 ft], 12dB position for cables over 7 1/2m [25 ft]</li>
</ul>

UA834 is available in different frequency bands.

The Shure UA834 is a low-noise, in-line VHF and UHF antenna amplifier.

The Shure UA834 is a low-noise, in-line VHF and UHF antenna amplifier. It is intended for remote-mounting antennas to a Shure receiver or Model UA845UWB, or UA844+ distribution amplifier in a large installation.

UA834

UA834V

UA834WB

UA834Z17

UA834Z18

Compatible with the UA874 active antenna and the UA830 in-line antenna amplifier, the UABIAST allows those accessories to be used with Shure wireless systems that do not supply power from their BNC antenna inputs and are used without an antenna distribution amplifier UA844 or UA845. One UABIAST supplies power to any combination of up to three connected active Shure antenna accessories for extended cable runs and antenna placement options. Available Configurations: <ul> <li>UABIAST-E: In-Line Power Supply, BNC-BNC</li> <li>UABIAST-UK: In-Line Power Supply, BNC-BNC</li> </ul>   <img src="/dmsfiles/default/shure/products/accessories/images/wireless/uabiast/uabiast-chart" alt="Shure UABIAST use case chart" width="600px" />

UABIAST In-Line Power Adapter

UABIAST User Guide

UABIAST Declarations of Conformity (EU)

In-line power adapter supplies 12V DC bias power over a coaxial cable and supports up to 3 active antenna devices.

The Shure UABIAST is an in-line adapter that supplies 12V DC bias power over coaxial cable, supports up to three active Shure antenna devices.

UABIAST

In-line adapter that supplies 12V DC bias power over coaxial cable, EU Power Supply

UABIAST-E

In-line adapter that supplies 12V DC bias power over coaxial cable, UK Power Supply

UABIAST-UK

The UA874 replaces the UA870. UA874 uses a log periodic dipole array to produce a cardioid pattern towards the desired coverage area with greater rejection of RF signals outside the coverage area when compared to standard ½ wave omnidirectional antennas. An integrated amplifier with four gain settings compensate for varying degrees of coaxial cable signal loss. The UA874 can be stand-mounted, suspended from the ceiling, or wall-mounted using the included swivel adapter bracket.

UA874 UHF Active Directional Antenna

UA874 CAD

UA874xx Declarations of Conformity (EU)

UA874WB Declarations of Conformity (EU)

UA874V User Guide

UA874V CAD

UA874 User Guide

<ul> <li>Compatible with all Shure wireless receivers and antenna distribution systems that provide 12V DC bias</li> <li>Four-position gain selector switch</li> <li>Low-noise signal amplifier compensates for transmission loss in coaxial cable</li> <li>Integrated threaded adapter mounts easily to microphones stands</li> </ul>

Active directional UHF and VHF antenna delivers improved wireless signal reception with integrated amplification.

Active directional UHF antenna with integrated amplifier for improved wireless signal reception.

UA874

UA874V

UA874WB

UA874Z17

UA874Z18

UA8 ½ Wave Dipole Antenna 

UA8-470-636 CAD

1/2 wave dipole antenna offers 45-degree positioning related to the horizontal or vertical position for more flexibility for better RF reception.

1/2 Wave Omnidirectional Receiver Antenna  Can be positioned in a 45° position related to the horizontal or vertical position for more flexibility related to RF reception.

UA8, 

UA8-1435-1525

UA8-1785-1930

UA8-470-542

UA8-518-598

UA8-554-638

UA8-572-596

UA8-578-638

UA8-596-698

UA8-626-698

UA8-670-742

UA8-690-746

UA8-694-758

UA8-710-790

UA8-740-814

UA8-750-822

UA8-774-865

The KSM9 is a Shure premium vocal microphone. The high-quality technology provides sophisticated components that capture the world&#39;s most accomplished studio and live performances.

Wireless KSM9 Cartridge             

Black wireless KSM9 cartridge replaces the cartridge, housing assembly, and matte grille for wireless KSM9 microphones.

RPW184

Cartridge, housing assembly and matte grille for wireless KSM9. Black.

RPW174 - Black KSM8 Wireless Capsule for Black Shure Transmitters

Exchangeable capsule for wireless performance with the KSM8 Dualdyne Cardioid Dynamic Vocal Microphone.


The KSM8 Wireless Capsule for use with handheld transmitters enables wireless performances with the KSM8 Dualdyne Cardioid Dynamic Vocal Microphone. Available in black or brushed nickel finish.


RPW174

Exchangeable capsule for wireless performance with the KSM8 Dualdyne Cardioid Dynamic Vocal Microphone.

RPW170 - Nickel KSM8 Wireless Capsule for Nickel Shure Transmitters

RPW170

Microphone clip              

Microphone clip mounts a handheld transmitter.

WA371

Microphone mounting clip for all Shure handheld transmitters, AXT610 and UA860SWB, diameter: ca. 35 mm.

Premium materials, including Neutrik straight &frac14;&rdquo; (6.3 mm) and locking REAN TA4F connectors, provide durability and lower cable handling noise and sets the WA305 apart for electric instruments, especially electric guitar and bass. The straight cable is ideal for Strat-type guitars with recessed jacks.

The threaded collar on the WA305 is compatible for use with the following bodypacks: GLXD1, GLXD1+, QLXD1, ULXD1-TQG, AD1-TQG, ADX1-TQG, SLXD1

Premium Guitar/Bass Cable with locking thread          

WA305 User Guide

WA30x_WA31x Declarations of Conformity (EU)

<ul>
	<li>3.0&rsquo; (0.9 m) rubber-coated instrument cable reduces handling noise and provides road-worthy durability.</li>
	<li>Premium straight &frac14;&rdquo; (6.3 mm) gold-plated Neutrik connector offer unmatched fidelity and corrosion-free performance</li>
	<li>Threaded-collar locking REAN TA4F connector securely connects your bodypack for unintterupted signal.</li>
</ul>

Premium Straight Instrument Cable with Locking TA4F Connector

Connects Bodypack Transmitters to a guitar, bass or other electric instrument.

SLXD14/SM35

Components

Related Products

Reviews