Software & Firmware Archives

Improvements

• General improvements

Known Issues

• Transmitter firmware update will fail if the transmitter Power = OFF (standby)
  • Workaround: Set transmitter Power = ON before performing the firmware update

Notes

• This firmware is compatible with Q5X AquaMic™, CoachMic™, and PlayerMic®
• To install Q5X firmware on devices:
  1. Download Q5X 1.2.56 firmware from Shure Update Utility (user guide)
  2. Connect to the AD4D, AD4Q, or ADX5D receiver, and in the Hosted Tx section, select Q5XTx 1.2.56
  3. Send the update to the receiver
  4. Use IR Sync to update the transmitter firmware
• AD4D and AD4Q can only host one transmitter firmware image at a time; if you also need to update Axient Digital transmitters, please repeat the above process, but select an ADTx firmware version.
• To operate this version of Q5X AquaMic™, CoachMic™, and PlayerMic® with other Shure systems and software, see the following list of recommended versions:
  • AD4D/Q 1.4.7
  • ADX5D 1.4.7
  • Shure Update Utility 2.7.2
• Distributed by Shure, AquaMic™, CoachMic™, and PlayerMic® and MicCommander™ are Q5X products. For support and service, please visit www.q5x.com.

Recommendation

• Update all QLX-D devices in a configuration to the same firmware version.

Important

• QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

• Support for added hardware revisions

Notes

• To operate QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on version 2.X firmware or later.
• To operate this version of QLX-D devices with other Shure networked systems and software, see the following list of recommended versions:
  • AXT600 Axient Spectrum Manager 2.1.41
  • PSM1000 P10T Transmitters 1.3.6
  • ULX-D 2.7.3
  • Wireless Workbench 6.15.2
  • Shure Update Utility 2.7.2
  • ShurePlus Channels iOS 1.5.2
  • ShurePlus Channels Android 1.1.1

Recommendation

• Update all QLX-D devices in a configuration to the same firmware version.

Important

• QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

• Support for added hardware revisions

Notes

• To operate QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on version 2.X firmware or later.
• To operate this version of QLX-D devices with other Shure networked systems and software, see the following list of recommended versions:
  • AXT600 Axient Spectrum Manager 2.1.41
  • PSM1000 P10T Transmitters 1.3.6
  • ULX-D 2.7.3
  • Wireless Workbench 6.15.2
  • Shure Update Utility 2.7.2
  • ShurePlus Channels iOS 1.5.2
  • ShurePlus Channels Android 1.1.1

Recommendation

• Update all QLX-D devices in a configuration to the same firmware version.

Important

• QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

• Support for added hardware revisions

Notes

• To operate QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on version 2.X firmware or later.
• To operate this version of QLX-D devices with other Shure networked systems and software, see the following list of recommended versions:
  • AXT600 Axient Spectrum Manager 2.1.41
  • PSM1000 P10T Transmitters 1.3.6
  • ULX-D 2.7.3
  • Wireless Workbench 6.15.2
  • Shure Update Utility 2.7.2
  • ShurePlus Channels iOS 1.5.2
  • ShurePlus Channels Android 1.1.1

Recommendation

• Update all QLX-D devices in a configuration to the same firmware version.

Important

• QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

• Support for added hardware revisions

Notes

• To operate QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on version 2.X firmware or later.
• To operate this version of QLX-D devices with other Shure networked systems and software, see the following list of recommended versions:
  • AXT600 Axient Spectrum Manager 2.1.41
  • PSM1000 P10T Transmitters 1.3.6
  • ULX-D 2.7.3
  • Wireless Workbench 6.15.2
  • Shure Update Utility 2.7.2
  • ShurePlus Channels iOS 1.5.2
  • ShurePlus Channels Android 1.1.1

Recommendation

• Update all QLX-D devices in a configuration to the same firmware version.

Important

• QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

• Support for added hardware revisions

Notes

• To operate QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on version 2.X firmware or later.
• To operate this version of QLX-D devices with other Shure networked systems and software, see the following list of recommended versions:
  • AXT600 Axient Spectrum Manager 2.1.41
  • PSM1000 P10T Transmitters 1.3.6
  • ULX-D 2.7.3
  • Wireless Workbench 6.15.2
  • Shure Update Utility 2.7.2
  • ShurePlus Channels iOS 1.5.2
  • ShurePlus Channels Android 1.1.1

Recommendation

• Update all QLX-D devices in a configuration to the same firmware version.

Important

• QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

• Support for added hardware revisions

Notes

• To operate QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on version 2.X firmware or later.
• To operate this version of QLX-D devices with other Shure networked systems and software, see the following list of recommended versions:
  • AXT600 Axient Spectrum Manager 2.1.41
  • PSM1000 P10T Transmitters 1.3.6
  • ULX-D 2.7.3
  • Wireless Workbench 6.15.2
  • Shure Update Utility 2.7.2
  • ShurePlus Channels iOS 1.5.2
  • ShurePlus Channels Android 1.1.1

Improvements

• Adjusted bootup sound volume

Notes

• Stem Ecosystem Firmware Updates - FAQ

Improvements

• Fix for monitor mix crash when translations are used

Notes

• MOTIV User Guide
• MV7 User Guide
• MV88+ User Guide
• Frequently Asked Questions
• Compatible with Android 10 and higher
• Learn more about MOTIV microphone compatibility with your Android device at www.shure.com/motiv-compatibility

Improvements

• Fixed an issue where more scan exclusion peaks were detected than in Wireless Workbench
• General bug fixes

Notes

• User Guide
• To operate this version of AD600 with other Shure systems and software, see the following list of minimum versions: 
  • Axient Digital AD1/2, ADX1/1M/2/2FD and AD3 Transmitters 1.4.7
  • Axient Digital AD4D/Q Receivers 1.4.7
  • Axient Digital AD610 Diversity ShowLink® Access Point 1.4.7
  • Shure Update Utility 2.7.2 
  • ShurePlus Channels iOS 1.5.2 
  • ShurePlus Channels Android 1.1.1 
  • Wireless Workbench 6.15.2