axient_digital

Wireless-systems

Products

Home

ad4d

en-XM

Wireless Accessory Wizard

Tool

Wireless Mic Remote Antennas Tool

AD4D BIM

Document

Axient Digital Frequency Compatibility Chart

Axient Digital Brochure

AD4D CAD1

AD4D CAD

Axient Digital Spec Sheet

Axient Digital Public Safety Notice

Disqualified Network Switches for Shure Dante Devices

Axient Digital Network Command Strings

Axient Digital ADX Architect Specifications

Axient Digital AD Architect Specifications

AD4D User Guide

Shure

Wireless Workbench 7

ShurePlus™ Channels

Axient Digital offers dual and quad receiver options that open the door to a full range of features, from high-performance RF to transparent digital audio.

The AD4Q Four-Channel Digital Receiver sets a new standard in spectral efficiency. Groundbreaking performance features include wide tuning, low latency, High Density (HD) mode, and Quadversity, ensuring solid performance in the most challenging RF environments. Networked control, AES3 + AES67 + Dante&trade; output, and signal routing options bring a new level of management and flexibility to your entire workflow.

Note: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation.

AD4Q Four-Channel Digital Wireless Receiver

AD4Q User Guide

AD4Q CAD 

<ul>
	<li>Works with Axient&reg; Digital Wireless Systems</li>
	<li>Features Quadversity&trade; mode for extended antenna coverage, switchable XLR and AES3 outputs, and all capabilities of the AD4D Two-Channel Digital Receiver</li>
	<li>Available with or without accessories</li>
</ul>

<ul>
	<li>Wide tuning range up to 184 MHz</li>
	<li>True digital diversity reception per channel for drop-out resistance</li>
	<li>Networked control with Wireless Workbench&reg; software and ShurePlus&trade; Channels iOS app</li>
	<li>Quadversity mode for extended antenna coverage and improved RF signal-to-noise</li>
	<li>Front panel headphone jack enables Dante&trade; Cue and Dante&trade; Browse monitoring</li>
	<li>Configurable Ethernet switch for redundant Dante or AES67 digital output</li>
	<li>Switchable XLR and AES3 outputs</li>
	<li>Channel Quality meter displays RF signal-to-noise</li>
	<li>Locking AC connectors</li>
	<li>DC module version available to support redundant power</li>
</ul>

Dual

Broadcast/ENG

Commercial Installation

Film & TV production

House of Worship

Theater

Touring/Rental

Compatible with all AD series and ADX series transmitters.

TV/Film & ENG

Field & Event Production

Axient Digital

Shure Axient Digital

Shure Axient Digital pushes the limits of RF

AD4Q

Auditorium

Lecture Hall

Live Performance

Place of worship

Rehearsal Space

Stadium

Stage & Event

Theater Stage

3 Pin XLR

Four-Channel Digital Wireless Receiver, A&nbsp;(470&nbsp;- 636&nbsp;MHz),&nbsp;ADX DC power module

AD4Q-DC=-A

Four-Channel Digital Wireless Receiver, B&nbsp;(606&nbsp;- 810&nbsp;MHz),&nbsp;ADX DC power module

AD4Q-DC=-B

Frequency Band Version: 470-636 MHz (A), EU&nbsp;powercord&nbsp;included

AD4QE=-A

Frequency Band Version: 606-810 MHz (B), EU&nbsp;powercord&nbsp;included

AD4QE=-B

Frequency Band Version: 470-636 MHz (A), without accessories

AD4QNP=-A

Frequency Band Version: 606-810 MHz (A), without accessories

AD4QNP=-B

Frequency Band Version: 470-636 MHz (A), UK powercord&nbsp;included

AD4QUK=-A

Frequency Band Version: 606-810 MHz (B), UK powercord included

AD4QUK=-B

Locking AC Power Connector            

Locking AC power connector for Axient® Digital receivers.

Locking AC power connector for Axient® Digital receivers, EU Version.

LPC-E

Locking AC power connector for Axient® Digital receivers, UK Version

LPC-UK

Active Antenna/Power Distribution System, five-way, wideband VHF and UHF, internal power supply. Five-Way Active Antenna Splitter and Power Distribution System for U4S, UR4S, U4D, and UR4D receivers, AD4, ULXD4, UXLD4D, ULXD4Q receivers, SLX4, BLXR4 and QLXD4 receivers.

The Shure Model UA845UWB is an amplified, VHF and UHF Antenna Distribution System that expands a wireless microphone system by splitting one pair of antennas to multiple Shure Axient Digital, UHF-R, ULX-D, BLX4R, SLX4 and BLX4R. It also amplifies RF signals to compensate for insertion loss due to splitting signal power to multiple output connectors. Each UA845UWB allows up to four receivers to use the same antennas. CASCADE connectors allow connections to a fifth receiver or a second UA845UWB.

Expandability. The UA845UWB Antenna Distribution System is designed for large Axient Digital, UHF-R, ULX-D&trade;, QLX-D, SLX, BLX4R wireless systems. Each unit allows up to four wireless receivers to use the same two antennas, and the CASCADE ports allow connection to a fifth receiver or a second UA845UWB.

Compatibility. The UA845UWB is compatible with all Shure Axient Digital, UHF-R, ULX-D, SLX, BLX4R, QLX-D wireless microphone receivers operating within a compatible frequency range (see UHF Carrier Frequency Ranges in the Specifications section).

CASCADE Ports. Two 50 &Omega;, BNC-type antenna CASCADE ports allow an additional UA845UWB unit or a fifth wireless receiver. A large wireless system can be run off of a single pair of antennas.

Power OUTPUT and OUT Connectors for Shure UHF and UHF-R&reg; Wireless systems. Up to five U4 or UR4 receivers can be daisy-chained and powered from a single source via the Power OUTPUT connectors. DOES NOT APPLY TO ULX or ULX-D.

Active Antenna/Power Distribution System, five-way, VHF, UHF, 1.2, 1.5, and 1.8 GHz, internal power supply.

UA845UWB is also available without cable.

Antenna Distribution System             

UA845UWB User Guide

Antenna distribution system expands a wireless microphone system by splitting 1 pair of antennas and amplifies RF signals.

UA845UWB

Active Antenna/Power Distribution System, EU Power Supply

UA845UWB-E

Active Antenna/Power Distribution System, UK Power Supply

UA845UWB-UK

Active Antenna/Power Distribution System, five-way, wideband VHF and UHF, internal power supply. Five-Way Active Antenna Splitter and Power Distribution System for AD4, U4S, UR4S, U4D, and UR4D receivers, ULXD4, UXLD4D, ULXD4Q receivers, SLX4, BLXR4 and QLXD4 receivers.

The Shure Model UA845UWB is an amplified, VHF and UHF Antenna Distribution System that expands a wireless microphone system by splitting one pair of antennas to multiple Shure Axient Digital, UHF-R, ULX-D, BLX4R, SLX4 and BLX4R. It also amplifies RF signals to compensate for insertion loss due to splitting signal power to multiple output connectors. Each UA845UWB allows up to four receivers to use the same antennas. CASCADE connectors allow connections to a fifth receiver or a second UA845UWB.

Expandability. The UA845UWB Antenna Distribution System is designed for large Axient Digital, UHF-R, ULX-D™, QLX-D, SLX, BLX4R wireless systems. Each unit allows up to four wireless receivers to use the same two antennas, and the CASCADE ports allow connection to a fifth receiver or a second UA845UWB.

Compatibility. The UA845UWB is compatible with all Shure Axient Digital, UHF-R, ULX-D, SLX, BLX4R, QLX-D wireless microphone receivers operating within a compatible frequency range (see UHF Carrier Frequency Ranges in the Specifications section).

CASCADE Ports. Two 50 Ω, BNC-type antenna CASCADE ports allow an additional UA845UWB unit or a fifth wireless receiver. A large wireless system can be run off of a single pair of antennas.

Power OUTPUT and OUT Connectors for Shure UHF and UHF-R® Wireless systems. Up to five U4 or UR4 receivers can be daisy-chained and powered from a single source via the Power OUTPUT connectors. DOES NOT APPLY TO ULX or ULX-D.

UA845UWB/LC is also available with cable.

UA845UWB/LC

UA845UWB/LC-E

Active Antenna/Power Distribution System, UK Power Supply

UA845UWB/LC-UK

UA834&nbsp;replaces UA830. In-Line UHF Antenna Amplifier for remote mounting antennas with BLX4R, SLX4, QLX-D, ULX-D, UR4 and AXT400 receivers or UA844+ and UA845UWB Antenna Distribution Systems. (470 - 952 MHz)

The Shure UA834&nbsp;is a low-noise, in-line VHF and UHF antenna amplifier. It is intended for remote-mounting antennas to a Shure receiver or Model UA845UWB, or UA844+ distribution amplifier in a large installation.

The unit receives power through its output port from the Shure receiver, UABIAST or distribution amplifier. When an antenna is remote mounted, the UA834&nbsp;amplifies the received radio signals to compensate for insertion loss in the coaxial cable. A gain selector switch adjusts for longer lengths of coaxial cable.

In-Line Antenna Amplifier             

UA834 User Guide

UA834 CAD

<ul>
	<li>Compatible with the Shure Model UR4 ULX wireless microphone receiver and the Shure Model UA845UWB, or UA844+ Antenna Distribution System.</li>
	<li>Mountable on supplied desk-/wall-mount or on a microphone stand.</li>
	<li>Two-position gain selector switch to adjust for longer coaxial cable lengths (6dB position for cables under 7 1/2m [25 ft], 12dB position for cables over 7 1/2m [25 ft]</li>
</ul>

UA834 is available in different frequency bands.

The Shure UA834 is a low-noise, in-line VHF and UHF antenna amplifier.

The Shure UA834 is a low-noise, in-line VHF and UHF antenna amplifier. It is intended for remote-mounting antennas to a Shure receiver or Model UA845UWB, or UA844+ distribution amplifier in a large installation.

UA834

UA834V

UA834WB

UA834Z17

UA834Z18

Omnidirectional Antenna              

UA860SWB CAD

UA860SWB User Guide

<ul>
	<li>Greatly improves reception of wireless signal from BLX4R, SLX, QLX-D, ULX-D, UHF-R and Axient Wireless Systems.</li>
	<li>Omnidirectional dipole reception pattern</li>
	<li>Includes stand adapter, thread adapter, a 61cm (2ft) coaxial antenna cable, and a 7.6m (25ft) coaxial antenna cable</li>
</ul>

The Shure UA860SWB is a passive wide band UHF omnidirectional antenna. 

The Shure UA860SWB is a passive wide band UHF omnidirectional antenna. For use with certain Shure wireless products.

UA860SWB

UA874 uses a log periodic dipole array to produce a cardioid pattern towards the desired coverage area with greater rejection of RF signals outside the coverage area when compared to standard &frac12; wave omnidirectional antennas. An integrated amplifier with four gain settings compensate for varying degrees of coaxial cable signal loss.

The UA874 can be stand-mounted, suspended from the ceiling, or wall-mounted using the included swivel adapter bracket.

Active Directional Antenna            

UA874 CAD

UA874V User Guide

UA874V CAD

UA874 User Guide

Active directional UHF and VHF antenna delivers improved wireless signal reception with integrated amplification.

Active directional UHF and VHF antenna delivers improved wireless signal reception with integrated amplification. Features include greater rejection of RF signals outside the coverage area and an integrated amplifier with 4 gain settings.

UA874

UA874E

UA874V

UA874WB

UA874Z17

UA874Z18

Coaxial Cable              

100-foot coaxial cable offers BNC to BNC connection.

UA8100

The Coaxial Cable is for use below 1GHz, 100 ft length (30 m).


BNC-BNC Coaxial Low Loss RF Cable for use between 1 and 2 GHz, 50 Ohm, 100 ft length (30m).


UA8100Z

The UA864 antenna provides wideband RF coverage in a low-profile enclosure that easily mounts on a wall or ceiling. The neutral white housing allows the antenna to blend into corporate or classroom settings, and is paintable to match interior colour schemes. The 4-position selectable gain switch provides attenuation and boost settings to optimise the antenna performance for varying transmitter distances and cable run lengths.

Wall-Mounted Wideband Antenna             

UA864 CAD

UA864 User Guide

<ul>
	<li>Up to 100 degrees coverage pattern (3dB beam width, region dependent)</li>
	<li>Four-position RF gain switch with pad/boost (-20, -10, 0, +10 dB)</li>
	<li>Attached BNC cable for surface or through-wall cable routing options</li>
	<li>Low-profile design</li>
	<li>Metal surface mounting capability</li>
	<li>Neutral white, paintable housing</li>
</ul>

Wall-mounted wideband antenna provides wideband RF coverage in a low-profile enclosure that easily mounts on a wall or ceiling.

UA864

Wall-Mounted Wideband Antenna, 650-952 MHZ

UA864A

Wall-Mounted Wideband Antenna, 530-790 MHz

UA864HI

Wall-Mounted Wideband Antenna, 470-698 MHz

UA864LO

Wall-Mounted Wideband Antenna, 1492-1525 MHz

UA864Z17

Wall-Mounted Wideband Antenna, 1785-1805 MHz

UA864Z18

The AD610 ShowLink&reg; access point enables real-time remote control of all ShowLink-enabled Axient&reg; transmitters, including both ADX and AXT series models. The access point allows comprehensive management of transmitter parameters from the receiver or Wireless Workbench&reg; using 2.4 GHz (IEEE 802.15.4) wireless communication. All parameter changes occur without interruption to the performer.

Multiple access points can extend the operational range or increase the number of transmitters supported on the ShowLink network. The access point features true diversity antenna inputs along with mounting points for &frac14;&quot;-20 and M6 x 1.0 thread.

Diversity ShowLink® Access Point            

AD610 User Guide

AD610 CAD

<ul>
	<li>Wireless network connectivity between all linked transmitters and access points</li>
	<li>Enables real-time wireless remote control of up to 24&nbsp;transmitters per access point</li>
	<li>ShowLink&reg; offers ability to adjust gain, change frequencies, mute signals, and more</li>
	<li>True Diversity antenna scheme maintains a robust link in the 2.4GHz frequency range</li>
	<li>Automatic channel selection scans the 2.4GHz range for the best channel.&nbsp;Scans can be saved for future analysis in Wireless Workbench</li>
	<li>Automatic frequency agility moves the network to the best available channel if single degrades</li>
	<li>High power option for extended range, accessible via Wireless Workbench (region-dependent)</li>
	<li>Compatible with Axient Digital ADX series and Axient analog systems</li>
</ul>

The AD610 provides a wireless ShowLink® connection between all linked transmitters and receivers.

Live Sound Engineering

A/V Conferencing

Speech

Vocals

The AD610 provides a wireless ShowLink® connection between all linked transmitters and receivers. ShowLink technology offers unprecedented remote control and monitoring for easy coordination of clean, usable frequencies no matter what kind of RF environment you face.

AD610

Field recording

Broadcast Studio

Hotel & Convention

RJ45 (for Ethernet) 

Diversity ShowLink® Access Point

AD610-E

AD610-UK

10-foot coaxial cable connects wireless receivers to their antennas or antenna distribution systems.

PA725

10-foot (3 m) coaxial cable (RG-8) with BNC connectors.

Filter by product category, then series

Find a Dealer Near You

Please Choose a Country to See Available Dealers

Filter by dealer type

- Shure Middle East and Africa

Cable Length

Colors

Connector

Select a Combination

Frequency Band

Find my frequency

Furnished Cables

Furnished Capsules

Studio Kit

On Off Switch

Shape

Stand Type

Release Title

Viewing this video may result in cookies being placed by the vendor of the video platform to which you will be directed. Given the refusal of the deposit of cookies that you have expressed, in order to respect your choice, we have blocked the playback of this video. If you want to continue and play the video, you must give us your consent by clicking on the button below.

Wireless Receivers

Two-Channel Digital Wireless Receiver, A (470-636 MHz),&nbsp;Redundant DC power-input modification

AD4D-DC=-A

Axient Digital offers dual and quad receiver options that open the door to a full range of features, from high-performance RF to transparent digital audio.

The AD4D Two-Channel Digital Receiver sets a new standard in spectral efficiency. Groundbreaking performance features include wide tuning, low latency, and High Density (HD) mode, ensuring solid performance in the most challenging RF environments. Networked control, AES3 + AES67 + Dante&trade; output, and signal routing options bring a new level of management and flexibility to your entire workflow.

Note: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation.

AD4D Two-Channel Digital Wireless Receiver

AD4D CAD 

<ul>
	<li>Works with Axient&reg; Digital Wireless Systems</li>
	<li>Features networked control and signal routing options, plus mobile monitoring and control capabilities</li>
	<li>Available with or without accessories</li>
</ul>

<ul>
	<li>Wide tuning range up to 184 MHz</li>
	<li>True digital diversity reception per channel for drop-out resistance</li>
	<li>Networked control with Wireless Workbench&reg; software and ShurePlus&trade; Channels iOS app</li>
	<li>Front panel headphone jack enables Dante&trade; Cue and Dante&trade; Browse monitoring</li>
	<li>Configurable Ethernet switch for redundant Dante or AES67 digital output</li>
	<li>AES3 output</li>
	<li>Channel Quality meter displays RF signal-to-noise</li>
	<li>Locking AC connectors</li>
	<li>DC module version available to support redundant power</li>
</ul>

Quad

AD4D

Two-Channel Digital Wireless Receiver, B&nbsp;(606 - 810&nbsp;MHz),&nbsp;Redundant DC power-input modification

AD4D

Related Products

Further Reading

Getting the most out of Axient Digital with Wireless Workbench 6