slx_d_digital_wireless

Wireless-systems

Products

Home

slxd4d

en-GB

SLXD4D Declarations of Conformity UK

Document

SLXD4D BIM

SLX-D Frequency Compatibility Chart

SLX-D Spec Sheet

SLX-D Quick Start Guide

SLX-D Command Strings

SLX-D Architect Specifications

SLX-D User Guide

Shure

Wireless Workbench 7

ShurePlus™ Channels

SLX-D&reg;&nbsp;Digital Wireless delivers transparent, 24-bit digital audio and rock solid RF performance with easy setup and rechargeability options in a suite of versatile wireless system configurations.&nbsp; Featuring industry-leading digital wireless technology and design, the SLXD4 easily syncs wireless transmitters.&nbsp; A variety of interchangeable microphone choices guarantees the right solution for&nbsp;a wide range of applications, from day-long presentations to nighttime performances.

Digital Wireless Receiver

SLX-D CAD Files

SLX-D Spec Sheets

SLXD4 Declarations of Conformity (EU)

<ul>
	<li>Transparent 24-bit digital audio</li>
	<li>Extended 20 Hz to 20 kHz frequency range (microphone dependent)</li>
	<li>118&nbsp;dB dynamic range</li>
	<li>Digital predictive switching diversity</li>
	<li>44 MHz tuning bandwidth (region dependent)</li>
	<li>32 available channels per frequency band (region dependent)</li>
	<li>Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band</li>
	<li>Easy pairing of transmitters and receivers over IR scan and sync</li>
	<li>Up to 8 hours from 2 AA batteries or optional Shure SB903 rechargeable battery</li>
	<li>Interchangeable microphone capsules</li>
	<li>Rugged metal construction</li>
</ul>

Broadcast/ENG

Commercial Installation

Corporate

Education

Film & TV production

Government

House of Worship

Touring/Rental

The SLXD4 Receiver is the choice for confident presentation and performance - from lecture halls to live entertainment.

SLX-D

SLX-D How To: Set Up and Use

SLX-D How To: Lock and Unlock

SLX-D How To: Add a Receiver

SLXD4

SLXD4, 

Conference Room

Corporate Presentation

Auditorium

Lecture Hall

Live Performance

Place of worship

Rehearsal Space

Stadium

Theater Stage

3 Pin XLR

SLXD4UK=-G59

SLXD4UK=-H56

SLXD4UK=-J53

SLXD4UK=-K59

SLXD4UK=-L56

Coaxial Cable              

UA850 Declarations of Conformity (EU)

50-foot coaxial cable is for use below 1GHz.

UA850

The Coaxial Cable is for use below 1GHz, 50 ft length (15 m)


BNC-BNC Coaxial Low Loss RF Cable for use between 1 and 2 GHz, 50 Ohm, 50 ft length (15m)

UA850Z

Front Mount Antenna Kit            

UA600 User Guide

Front mount antenna kit includes 2 coaxial cables and 2 bulkhead adapters.

UA600

Antenna Kit, front mount, for SLX4, UR4S, UR4D and ULX single receivers, includes 2 coaxial antenna cables and 2 bulkhead adapters.

UA806 Declarations of Conformity (EU)

6-foot coaxial cable offers BNC to BNC connection.

UA806

Coaxial Cable, BNC-BNC, RG58C/U type, 50 Ohm, 6 ft length (2 m).

UA834&nbsp;replaces UA830. In-Line UHF Antenna Amplifier for remote mounting antennas with BLX4R, SLX4, QLX-D, ULX-D, UR4 and AXT400 receivers or UA844+ and UA845UWB Antenna Distribution Systems. (470 - 952 MHz)

The Shure UA834&nbsp;is a low-noise, in-line VHF and UHF antenna amplifier. It is intended for remote-mounting antennas to a Shure receiver or Model UA845UWB, or UA844+ distribution amplifier in a large installation.

The unit receives power through its output port from the Shure receiver, UABIAST or distribution amplifier. When an antenna is remote mounted, the UA834&nbsp;amplifies the received radio signals to compensate for insertion loss in the coaxial cable. A gain selector switch adjusts for longer lengths of coaxial cable.

In-Line Antenna Amplifier             

UA834 User Guide

UA834 CAD

UA834WB Declarations of Conformity (EU)

<ul>
	<li>Compatible with the Shure Model UR4 ULX wireless microphone receiver and the Shure Model UA845UWB, or UA844+ Antenna Distribution System.</li>
	<li>Mountable on supplied desk-/wall-mount or on a microphone stand.</li>
	<li>Two-position gain selector switch to adjust for longer coaxial cable lengths (6dB position for cables under 7 1/2m [25 ft], 12dB position for cables over 7 1/2m [25 ft]</li>
</ul>

UA834 is available in different frequency bands.

The Shure UA834 is a low-noise, in-line VHF and UHF antenna amplifier.

The Shure UA834 is a low-noise, in-line VHF and UHF antenna amplifier. It is intended for remote-mounting antennas to a Shure receiver or Model UA845UWB, or UA844+ distribution amplifier in a large installation.

UA834

UA834V

UA834WB

UA834Z17

UA834Z18

UA825 Declarations of Conformity (EU)

25-foot coaxial cable offers BNC to BNC connection.

UA825

The Coaxial Cable is for use below 1GHz, 25 ft length (7.5 m).


BNC-BNC Coaxial Low Loss RF Cable for use between 1 and 2 GHz, 50 Ohm, 25 ft length (7.5m).  


UA825Z

UA802 Declarations of Conformity (EU)

2-foot coaxial cable offers BNC to BNC connection.

UA802

Coaxial Cable, BNC-BNC, RG58C/U type, 50 Ohm, 2 ft length (0.6 m).

Omnidirectional Antenna              

UA860SWB CAD

UA860SWB User Guide

UA860 Declarations of Conformity (EU)

<ul>
	<li>Greatly improves reception of wireless signal from BLX4R, SLX, QLX-D, ULX-D, UHF-R and Axient Wireless Systems.</li>
	<li>Omnidirectional dipole reception pattern</li>
	<li>Includes stand adapter, thread adapter, a 61cm (2ft) coaxial antenna cable, and a 7.6m (25ft) coaxial antenna cable</li>
</ul>

The Shure UA860SWB is a passive wide band UHF omnidirectional antenna. 

The Shure UA860SWB is a passive wide band UHF omnidirectional antenna. For use with certain Shure wireless products.

UA860SWB

The UA505 Remote Antenna Mounting Bracket Kit lets you mount a 1/2 wave receiver antenna away from the receiver or the equipment rack. This kit includes one mounting bracket, a bulkhead adapter, and bulkhead adapter nut.  Note: Antennas and bracket mounting hardware (screws, washers, and nuts) are not included in this kit.

UA505 Antenna Mounting Bracket Kit

UA505-RSMA User Guide

UA505 User Guide

Antenna mounting bracket kit includes 1 mounting bracket, bulkhead adapter, and bulkhead adapter nut for remote antenna mounting.

Antenna Mounting Bracket and BNC adapter for remote antenna mounting.

UA505

Active Antenna/Power Distribution System, five-way, wideband VHF and UHF, internal power supply. Five-Way Active Antenna Splitter and Power Distribution System for U4S, UR4S, U4D, and UR4D receivers, AD4, ULXD4, UXLD4D, ULXD4Q receivers, SLX4, BLXR4 and QLXD4 receivers.

The Shure Model UA845UWB is an amplified, VHF and UHF Antenna Distribution System that expands a wireless microphone system by splitting one pair of antennas to multiple Shure Axient Digital, UHF-R, ULX-D, BLX4R, SLX4 and BLX4R. It also amplifies RF signals to compensate for insertion loss due to splitting signal power to multiple output connectors. Each UA845UWB allows up to four receivers to use the same antennas. CASCADE connectors allow connections to a fifth receiver or a second UA845UWB.

Expandability. The UA845UWB Antenna Distribution System is designed for large Axient Digital, UHF-R, ULX-D&trade;, QLX-D, SLX, BLX4R wireless systems. Each unit allows up to four wireless receivers to use the same two antennas, and the CASCADE ports allow connection to a fifth receiver or a second UA845UWB.

Compatibility. The UA845UWB is compatible with all Shure Axient Digital, UHF-R, ULX-D, SLX, BLX4R, QLX-D wireless microphone receivers operating within a compatible frequency range (see UHF Carrier Frequency Ranges in the Specifications section).

CASCADE Ports. Two 50 &Omega;, BNC-type antenna CASCADE ports allow an additional UA845UWB unit or a fifth wireless receiver. A large wireless system can be run off of a single pair of antennas.

Power OUTPUT and OUT Connectors for Shure UHF and UHF-R&reg; Wireless systems. Up to five U4 or UR4 receivers can be daisy-chained and powered from a single source via the Power OUTPUT connectors. DOES NOT APPLY TO ULX or ULX-D.

Active Antenna/Power Distribution System, five-way, VHF, UHF, 1.2, 1.5, and 1.8 GHz, internal power supply.

UA845UWB is also available without cable.

Antenna Distribution System             

UA845UWB User Guide

UA845UWB Declarations of Conformity (EU)

Antenna distribution system expands a wireless microphone system by splitting 1 pair of antennas and amplifies RF signals.

UA845UWB

Active Antenna/Power Distribution System, UK Power Supply

UA845UWB-UK

Passive Antenna Splitter             

UA221Z User Guide

UA221 CAD

UA221 User Guide

Passive antenna splitter splits an incoming signal into 2 outgoing signals or combines 2 incoming signals into 1 signal.

Passive antenna splitter splits an incoming signal into 2 outgoing signals or combines 2 incoming signals into 1 signal. The kit includes 2 UA221 Splitters/Combiners, 4 coaxial cables, and attaching hardware.

UA221

Antenna Splitter/Combiner Kit, Passive, for UC4, SLX4, ULXS4, ULXP4, U4S, U4D, UR4S and UR4D.

UA221Z Passive Antenna Splitter, 1000–2000 MHz

UA221Z

The UA874 replaces the UA870. UA874 uses a log periodic dipole array to produce a cardioid pattern towards the desired coverage area with greater rejection of RF signals outside the coverage area when compared to standard ½ wave omnidirectional antennas. An integrated amplifier with four gain settings compensate for varying degrees of coaxial cable signal loss. The UA874 can be stand-mounted, suspended from the ceiling, or wall-mounted using the included swivel adapter bracket.

UA874 UHF Active Directional Antenna

UA874 CAD

UA874xx Declarations of Conformity (EU)

UA874WB Declarations of Conformity (EU)

UA874V User Guide

UA874V CAD

UA874 User Guide

<ul> <li>Compatible with all Shure wireless receivers and antenna distribution systems that provide 12V DC bias</li> <li>Four-position gain selector switch</li> <li>Low-noise signal amplifier compensates for transmission loss in coaxial cable</li> <li>Integrated threaded adapter mounts easily to microphones stands</li> </ul>

Active directional UHF and VHF antenna delivers improved wireless signal reception with integrated amplification.

Active directional UHF antenna with integrated amplifier for improved wireless signal reception.

UA874

UA874V

UA874WB

UA874Z17

UA874Z18

The Shure PA805 is a directional antenna for increased range and reduced interference as compared to omnidirectional 1/2-wave antennas.

The PA805 can be mounted on a microphone stand or mounted to a wall using the integral swivel adapter bracket.

Directional Antenna              

PA805 CAD File

PA805Z2-RSMA CAD

PA805 User Guide

PA805SWB User Guide

PA805X User Guide

PA805 Declarations of Conformity (EU)

Directional wideband antenna offers 6 dB of gain.

Stage Monitoring

PSM 1000

PSM 900

PSM 300

Directional antenna for increased range and reduced interference as compared to omnidirectional 1/2-wave antennas.

PA805

PA805, 

Stage & Event

PA805SWB

Directional Antenna, 1240-1930 MHz

PA805Z

HA-8089 Helical Antenna

HA8089 Declarations of Conformity (EU)

Helical antenna provides greater bandwidth and longer range gain for receivers, transmitters, and distribution systems.

Wideband UHF (470-900 MHz) Remote Antenna for Shure UHF Receivers, PSM Transmitters and Antenna Distribution Systems.

HA-8089

Hotel & Convention

UA8100 Declarations of Conformity (EU)

100-foot coaxial cable offers BNC to BNC connection.

UA8100

The Coaxial Cable is for use below 1GHz, 100 ft length (30 m).


BNC-BNC Coaxial Low Loss RF Cable for use between 1 and 2 GHz, 50 Ohm, 100 ft length (30m).


UA8100Z

Active Antenna/Power Distribution System, five-way, wideband VHF and UHF, internal power supply. Five-Way Active Antenna Splitter and Power Distribution System for AD4, U4S, UR4S, U4D, and UR4D receivers, ULXD4, UXLD4D, ULXD4Q receivers, SLX4, BLXR4 and QLXD4 receivers.

The Shure Model UA845UWB is an amplified, VHF and UHF Antenna Distribution System that expands a wireless microphone system by splitting one pair of antennas to multiple Shure Axient Digital, UHF-R, ULX-D, BLX4R, SLX4 and BLX4R. It also amplifies RF signals to compensate for insertion loss due to splitting signal power to multiple output connectors. Each UA845UWB allows up to four receivers to use the same antennas. CASCADE connectors allow connections to a fifth receiver or a second UA845UWB.

Expandability. The UA845UWB Antenna Distribution System is designed for large Axient Digital, UHF-R, ULX-D™, QLX-D, SLX, BLX4R wireless systems. Each unit allows up to four wireless receivers to use the same two antennas, and the CASCADE ports allow connection to a fifth receiver or a second UA845UWB.

Compatibility. The UA845UWB is compatible with all Shure Axient Digital, UHF-R, ULX-D, SLX, BLX4R, QLX-D wireless microphone receivers operating within a compatible frequency range (see UHF Carrier Frequency Ranges in the Specifications section).

CASCADE Ports. Two 50 Ω, BNC-type antenna CASCADE ports allow an additional UA845UWB unit or a fifth wireless receiver. A large wireless system can be run off of a single pair of antennas.

Power OUTPUT and OUT Connectors for Shure UHF and UHF-R® Wireless systems. Up to five U4 or UR4 receivers can be daisy-chained and powered from a single source via the Power OUTPUT connectors. DOES NOT APPLY TO ULX or ULX-D.

UA845UWB/LC is also available with cable.

UA845UWB/LC

Active Antenna/Power Distribution System, UK Power Supply

UA845UWB/LC-UK

Compatible with the UA874 active antenna and the UA830 in-line antenna amplifier, the UABIAST allows those accessories to be used with Shure wireless systems that do not supply power from their BNC antenna inputs and are used without an antenna distribution amplifier UA844 or UA845. One UABIAST supplies power to any combination of up to three connected active Shure antenna accessories for extended cable runs and antenna placement options. Available Configurations: <ul> <li>UABIAST-E: In-Line Power Supply, BNC-BNC</li> <li>UABIAST-UK: In-Line Power Supply, BNC-BNC</li> </ul>   <img src="/dmsfiles/default/shure/products/accessories/images/wireless/uabiast/uabiast-chart" alt="Shure UABIAST use case chart" width="600px" />

UABIAST In-Line Power Adapter

UABIAST User Guide

UABIAST Declarations of Conformity (EU)

In-line power adapter supplies 12V DC bias power over a coaxial cable and supports up to 3 active antenna devices.

The Shure UABIAST is an in-line adapter that supplies 12V DC bias power over coaxial cable, supports up to three active Shure antenna devices.

UABIAST

In-line adapter that supplies 12V DC bias power over coaxial cable, EU Power Supply

UABIAST-E

In-line adapter that supplies 12V DC bias power over coaxial cable, UK Power Supply

UABIAST-UK

UA8 ½ Wave Dipole Antenna 

UA8-470-636 CAD

1/2 wave dipole antenna offers 45-degree positioning related to the horizontal or vertical position for more flexibility for better RF reception.

1/2 Wave Omnidirectional Receiver Antenna  Can be positioned in a 45° position related to the horizontal or vertical position for more flexibility related to RF reception.

SLXD4D

Related Products

Reviews