Microflex Complete

Release notes cover the following models:

• MXC605/605-F
• MXC615
• MXC620/620-F
• MXC630/630-F
• MXC640
• MXCIC
• MXCMIU
• MXCSIGN
• DIS-CCU
• AO6004
• DC5900F
• DC5980P
• DCS6000 legacy conference and interpreter units

Important

• This firmware release can be used to update Microflex Complete (MXC) or DCS 6000 systems using DIS-CCU Central Unit and to update DC5900F and DC5980P devices to register and work in an MXC system.
• Systems using CU 5905, CU 6000, CU 6005, CU 6010, CU 6011, CU 6105, or CU 6110 Central Units are not supported in this release.
• The Firmware Update Utility (FUU) included in this release, is required to be used making the update.

New Features

• MXCIC
  • Option to select microphone (headset or gooseneck) at headset insertion
• MXC640
  • ‘Chairman' changed to 'Chairperson'

Bug Fixes

• MXC640
  • Interpreter channels are not updating
  • The unit continues to show speech time, when speech time is paused, and then no speech time is selected
  • Voting result is wrong with large voting weight
  • Wrong vote conclusion is shown after entering votes manually from CUA
  • NFC card remove/insert during voting in 'Meeting mode: Using chip card authentication’ is failing
  • When chairperson turns off microphone other delegates seated on MXC640 units, have their speech time set to 00:00
  • Keeps showing delegate speech time after switching to group speech time
• MXCIC
  • Enable MIU interpreter source can occupy unused outgoing channels on MXCIC units
• MX605
  • Enable MIU interpreter source can block all outgoing channels on MXC605 Int.

Notes

• MXC and DCS 6000 firmware files are packaged together in the same release file.
• To operate MXC devices with FW release 9.4.0 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SW6000 v9.2 or later
  • Shure NFC Programming App 1.0.3

Release notes cover the following models:

• MXC605/605-F
• MXC615
• MXC620/620-F
• MXC630/630-F
• MXC640
• MXCIC
• MXCMIU
• MXCSIGN
• DIS-CCU
• AO6004
• DC5900F
• DC5980P
• DCS6000 legacy conference and interpreter units

Important

• This firmware release can be used to update Microflex Complete (MXC) or DCS 6000 systems using DIS-CCU Central Unit and to update DC5900F and DC5980P devices to register and work in an MXC system.
• Systems using CU 5905, CU 6000, CU 6005, CU 6010, CU 6011, CU 6105, or CU 6110 Central Units are not supported in this release.
• The Firmware Update Utility (FUU) included in this release, is required to be used making the update.

New Features

• MXC640
  • Optimization of voting performance (card insert/remove):
    • When the participant inserts the card, an animation 'Reading NFC card' is shown following with displaying of the name of the participant logging in. The animation is still shown when a participant is logging in, when a voting session is not started, but is fast-forwarded and greeting-banner removed, when a voting session is started enabling the participant to vote as quick as possible after inserting the card.
• DIS-CCU
  • ‘System information’ report updated to include firmware version of devices
  • Chairman' changed to 'Chairperson'

Bug Fixes

• DIS-CCU
  • The FW version number reported with the 'avr' command is different compared to FW version reported in FUU
  • Event log warning added if unknown card is detected
• MXC640
  • Removal of wrong NFC card during SW6000 meeting & voting, results in card-error-animation hang
  • Wrong voting conclusion (passed/not passed) can be displayed when under SW6000 control

Notes

• MXC and DCS 6000 firmware files are packaged together in the same release file.
• To operate MXC devices with FW release 9.3.0 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SW6000 v9.2 or later
  • Shure NFC Programming App 1.0.3

Release notes cover the following models:

• MXC605/605-F
• MXC615
• MXC620/620-F
• MXC630/630-F
• MXC640
• MXCIC
• MXCMIU
• MXCSIGN
• DIS-CCU
• AO6004
• DC5900F
• DC5980P
• DCS6000 legacy conference and interpreter units

Important

• This firmware release can be used to update Microflex Complete (MXC) or DCS 6000 systems using DIS-CCU Central Unit and to update DC5900F and DC5980P to register and work in an MXC system.
• Systems using CU 5905, CU 6000, CU 6005, CU 6010, CU 6011, CU 6105, or CU 6110 Central Units are not supported in this release.
• The Firmware Update Utility (FUU) included in this release, is required to be used making the update.

New Features

• This is a hotfix and does not include any new features. Please refer to ‘Release Note 9.2.0’ for a list of new features in FW 9.2.

Bug Fixes

• MXC620/620-F, MXC630/630-F, MXC640
  • A bug is corrected, where the NFC card, art. no. ‘MXCNFCCard-10PK’, did not work in the units.
• MXCIC
  • A bug is corrected, where units randomly did not respond to system changes (language channels etc.) and where the microphone list was not shown.

Known Issues

• For a list of known issues please refer to ‘Release Note 9.2.0’ for a list of new features in FW 9.2.

Notes

• MXC and DCS 6000 firmware files are packaged together in the same release file.
• To operate MXC devices with FW release 9.2 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SW6000 v9.2 or v9.3
  • Shure NFC Programming App 1.0.3

Release notes cover the following models:

• MXC605/605-F
• MXC615
• MXC620/620-F
• MXC630/630-F
• MXC640
• MXCIC
• MXCMIU
• MXCSIGN
• DIS-CCU
• AO6004
• DC5900F
• DC5980P
• DCS6000 legacy conference and interpreter units

Important

• This firmware release can be used to update Microflex Complete (MXC) or DCS 6000 systems using DIS-CCU Central Unit and to update DC5900F and DC5980P to register and work in an MXC system.
• Systems using CU 5905, CU 6000, CU 6005, CU 6010, CU 6011, CU 6105, or CU 6110 Central Units are not supported in this release.
• The Firmware Update Utility (FUU) included in this release must be usedtoupdate your firmware.

New Features

• This is a hotfix and does not include any new features. Please refer to the version 9.2.0 release notes for a list of new features in FW 9.2.

Bug Fixes

• MXC605
  • A bug is corrected where audio was not present in the loudspeaker in the unit when the MXC605 was configured as a voting unit.

Known Issues

• For a list of known issues please refer to ‘Release Note 9.2.0’ for a list of new features in FW 9.2.

Notes

• MXC and DCS 6000 firmware files are packaged together in the same release file.
• To operate MXC devices with FW release 9.2.0 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SW6000 v9.2
  • Shure NFC Programming App 1.0.3

Release notes cover the following models:

• MXC605/605-F
• MXC615
• MXC620/620-F
• MXC630/630-F
• MXC640
• MXCIC
• MXCMIU
• MXCSIGN
• DIS-CCU
• AO6004
• DC5900F
• DC5980P
• DCS6000 legacy conference and interpreter units

Important

• This firmware release can be used to update:
  • Microflex Complete (MXC) or DCS 6000 systems using DIS-CCU Central Unit
  • DC5900F and DC5980P to register and work in an MXC system
• Systems using CU 5905, CU 6000, CU 6005, CU 6010, CU 6011, CU 6105, or CU 6110 Central Units are not supported in this release
• The update requires using the Firmware Update Utility (FUU) included in this release

New Features

• System
  • Support for Mifare/Desfire card when used with SW6000
    • When using SW6000, the MXC system can now be configured to provide:
      • The User ID/Login code data from ACOS3 NFC cards programmed from SW6000 (current feature) or
      • The Unique ID on a Mifare/Desfire NFC card or an ACOS3 NFC card (new feature)
    • Benefits
      • Using the Unique ID enables usage of cards where no (meeting) data has been written to the card
      • This makes it possible to use cards that are provided to users for other purposes to login to SW6000, so the user needs to hold one less card
    • Important
      • Mifare/Desfire NFC cards can only be used with SW6000 connected, not in a standalone system
• DIS-CCU
  • Support for setting output/level on the AO6004 Audio Output unit
  • Additional languages – Polish & Croatian
  • System Information Report – Information content updated
  • Support for configuring MXCMIU as Interpreter source
  • Support for configuring MXC605 as a voting unit
  • Alternate LED indications. Option to set the microphone ‘Speak/Request color’:
    • Red speak | Green Request
    • Green speak | Green Request
  • Option to disable the Request indication in the gooseneck microphone
  • Disable Global language selection (CGUI) when SW6000 is connected
• MXCMIU
  • Interpreter Source option
• MXC640
  • Additional languages – Polish & Croatian
  • Expand Agenda Prefix
• MXC605
  • Option with new overlay: Voting 2- and 3-buttons, Attendance check, Secret/open voting
• MXCIC
  • Expand Agenda Prefix
• MXCSIGN
  • OS updated to allow the use of the USB connector together with the ‘Shure MXCSIGN App’. The app allows to transfer a defined picture to the sign
• TPCI
  • ‘Speak Slow’ support
  • MIU interpreter source option

Bug Fixes

• System
  • Ambient sound disappears when switching to VOX mode
• CCU
  • Web GUI removes only a single unregistered unit at 'Remove unregistered units'
  • Web GUI – Indication in buttons in Diagnostic screen updated
  • Diagnostic – last unit on a chain is reported as lost when reconfigured into loop
  • Floor1 and Floor2 is switched in the web GUI Channel-dropdown
  • Force CCU-configuration to 1000 m of cable, when upgrading from earlier versions to Release 9.2.0
  • The indication for 605 interpreter in 'Diagnostic' is wrong
• MXCMIU
  • Function button indication is not turning blue, when configured as ambient mic
• MXC620
  • Unit not reacting to card inserted, when location code is altered
• MXC620-F & MXC630-F
  • Chairman left button configured as Exclusive can take over other units already in Exclusive state
• MXC630 and MXC630-F
  • 3-Btn Secret voting with proxy – missing LED indication
  • Cannot login to a meeting during a paused Voting session
  • Indication in proxy button is not correct
  • Secret voting – wrong LED indication
• MXC640
  • "Attended" text is not translated
  • Misleading texts corrected when logging in with card
  • Missing clear feedback on buttons on login screen
  • Present/seats value = 2000 are cut of in right side, and only 200 is shown
  • Speech time display permissions are not working
  • Voting not possible with meeting mode: No login
• MXCIC
  • Some units are 'Locked' when the system is powered
  • Unable to turn off "Audible Level Warning"

Known Issues

• Manually entered voting results are not shown if a normal voting session has not been started first
• The agenda subject name for a manually entered result may be wrong
• It is not possible to use an MXC640 configured as dual delegate with SW6000 if the use of NFC cards is enabled

Notes

• These release notes include notes from the not-released FW 9.1
• MXC and DCS 6000 firmware files are packaged together in the same release file.
• To operate MXC devices with FW release 9.2 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SW6000 9.2.0
  • Shure NFC Programming App 1.0.3

Release notes cover the following models:

• MXC605
• MXC605-F
• MXC615
• MXC620/620-F
• MXC630/630-F
• MXC640
• MXCIC
• MXCMIU
• MXCSIGN
• DIS-CCU
• DC5900F
• DC5980P

Important

• This firmware release can be used to update Microflex Complete (MXC) or DCS 6000 systems using DIS-CCUCentral Unit and to update DC5900F and DC5980P to register and work in an MXC system.
• Systems using CU 5905, CU 6000, CU 6005, CU 6010, CU 6011, CU 6105, or CU 6110 Central Units are not supported in this release.
• The Firmware Update Utility (FUU) included in this release, is required for the update.

New Features

• This is a hotfix – no new features. Refer to release note for Release 9.0.0 for description of new features.

Bug Fixes

• Incorrect Default CCU-database when upgrading a former 5900-system (2000 m cable instead of default 1000m) leading to communication problems using short feeding cables.
• Updating of CCU from 8.6.2 (in 5900-mode) must force 6000-mode LAN configuration

Known Issues

• Refer to the release notes for Release 9.0.0 for description of known issues.

Notes 

• MXC and DCS 6000 firmware files are packaged together in the same release file.
• To operate MXC devices with version 9.0 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SW6000 9.0.13
  • Shure NFC Programming App 1.0.3

Release notes cover the following models:

• MXC605
• MXC605-F
• MXC615
• MXC620/620-F
• MXC630/630-F
• MXC640
• MXCIC
• MXCMIU
• MXCSIGN
• DIS-CCU
• DC5900F
• DC5980P

Important

• This firmware release can be used to update Microflex Complete (MXC) or DCS 6000 systems using DIS-CCU Central Unit and to update DC5900F and DC5980P to register and work in an MXC system.
• Systems using CU 5905, CU 6000, CU 6005, CU 6010, CU 6011, CU 6105, or CU 6110 Central Units are not supported in this release.
• The Firmware Update Utility (FUU) included in this release, is required to make the update.

New Features

• DIS-CCU  
  • MXC605 support – as delegate, chairman, ambient and interpreter
  • MXC605-F support – as delegate, chairman and ambient
  • DC5980P support for use in MXC system – as delegate, chairman and interpreter
    • Meeting role (Delegate/Chairman) is set in DIS-CCU  -  change "on-the-fly"
    • Left button is configured in DIS-CCU
      • Delegate: No function or Mute
      • Chairman: No function or All delegates off
  • DC5900F support for use in MXC system – as delegate and chairman
    • Meeting role (Delegate/Chairman) is set in DIS-CCU  -  change "on-the-fly"
  • Auto registration/selection of MXC VOX mode vs 6000 VOX mode. If 5900/6000 units are present, voice activation mode will be 6000 VOX mode, otherwise it will be MXC VOX mode
  • Comply with California’s IoT Law
  • Global and UI language options expanded with Catalan and Basque
  • System change option between 5900 and 6000 mode removed
  • FL6000 license included as default
• MXC Conference Units
  • Support for Speak button “Delegate speak button lock”
  • Support for Speak button "Press and hold"
  • UI language options expanded with Catalan and Basque
• MXCIC
  • Option to show agenda
  • Option to enable/disable the audio beeps for hearing protection
  • Mic LED button behavior to indicate selected outgoing channels status
• TCPI
  • 'mic_mute_all’ command included

Bug Fixes

• MXC Conference units
  • MXC VOX mode: Pressing Mute should prevent gating on own MIC
• MXC630-F 
  • Wrong indication in 'Abstain' button
• MXC640
  • Fixed LED control when a dual unit is both in speak list and request list
  • Present/seats value = 2000 was cut off on right side, and only 200 was shown
  • Home screen and FW upgrade screen images are changed
• MXCMIU
  • Individual microphone Level was not persistent across unit and CCU reset
• MXCIC 
  • Long participant names were not updating on Speakers page
• TPCI 
  • Individual vote state was missing a space char before button_id
  • Mic_speech_time_alarm repeats multiple times for alarm for each unit
  • Mix-minus state info was not correct
• Legacy 6000 units
  • VOX settings not kept after reboot

Known Issues

• MXC640
  • Manually entered voting results are not shown if a normal voting session has not been started first
  • The agenda subject name for a manually entered result may be wrong
  • It is not possible to use an MXC640 configured as dual delegate with SW6000 if the use of NFC cards is enabled

Notes

• MXC and DCS 6000 firmware files are packaged together in the same release file.
• To operate MXC devices using version 9.0 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SW6000 v9.0
  • Shure NFC Programming App 1.0.3

Important

• This firmware release can be used to update Microflex Complete (MXC), DCS 6000, or DCS 5900 systems using DIS-CCU, CU 5905, CU 6105, or CU 6110 Central Units.
• Systems using CU 6000, CU 6005, CU 6010 and CU 6011 Central Units are not supported in this release.
• The Firmware Upgrade Utility (FUU) which is included in the release, is required to update MXC devices.

New Features

• MXCSIGN features in CCU standalone operation:
  • The sign content to be shown can be selected either from the ‘Participant list/NFC’ or from a separate list with ‘Text lines’
  • Option to change font size
• MXCSIGN
  • Support for all alphabets (including complex alphabets) used in the MXC global languages
  • Hebrew is supported when used with SW6000
• Voice activation functionality with time compression in MXC conference units
• Mix-minus functionality in loudspeaker in MXC conference units
• TPCI additions:
  • Meeting start/stop
  • Autofloor on/off
  • Speech time alarm
  • Reporting of participants individual votes
  • MXCSIGN support
    • Control of the content in standalone systems
    • Support for pairing the MXCSIGN to a seat
    • Import of content into the text lines for MXCSIGN
• MXCMIU: Ambient support

Bug Fixes

• MXCSIGN
  • SW6000/MXCSIGN: Disconnecting-connecting a sign gives an error message

Known Issues

• MXC640
  • Manually entered voting results are not shown if a normal voting session has not been started first
  • The agenda subject name for a manually entered result may be wrong
  • It is not possible to use an MXC640 configured as dual delegate with SW6000 if the use of NFC cards is enabled

Notes

• MXC and DCS 6000 firmware files are packaged together in the same release file.
• To operate MXC devices with version 8.6.0 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SW6000 6.10.14
  • Shure NFC Programming App 1.0.3

Release notes cover the following models:

• MXC615
• MXC620/620-F
• MXC630/630-F
• MXC640
• MXCIC
• MXCMIU
• MXCSIGN
• DIS-CCU

Important

• This firmware release can be used to update Microflex Complete (MXC), DCS 6000, or DCS 5900 systems using DIS-CCU, CU 5905, CU 6105, or CU 6110 Central Units.
• Systems using CU 6000, CU 6005, CU 6010 and CU 6011 Central Units are not supported in this release.
• Firmware Upgrade Utility (FUU) v1686, which is included in the release, is required to update MXC devices.

New Features

• MXCMIU
  • Support for XLR input in the MXCMUI when configured as single unit. The use of this input is configured in the DIS-CCU CGUI. The following audio input options are available in the ‘Devices setup’ screen:
    • Port A
    • XLR – line
    • XLR – mic
  • The following option is available in the ‘Participant’ screen:
    • Audio level adjustment: +10 to -20 dB
  • Note: The Port A loudspeaker output and controls are still active when the MXCMUI is configured with XLR audio in.

Improvements

• MXC640
  • Percent indication in voting result screen is now visible when SW6000 is connected
• DIS-CCU (6000 Mode)
  • The state of enabling/disabling of NFC cards is restored after disconnection of SW6000
  • Diagnostics: Cable length info has been removed from the diagnostic report
  • Diagnostics: Cable break info in the diagnostic event log has been updated to report only one of the units connected to the defective cable

Bug Fixes

• DIS-CCU
  • Diagnostics: Incorrect seat number was reported in the Event log at Cable break
  • Diagnostics: Event log did not work when SW6000 was connected
  • Diagnostics: Fixed an error in cable length in the diagnostic report
  • CCU was wrongly storing users’ speaking rights after closing the CUI
• MXC630
  • Secret voting - LEDs turned off after casting first vote
  • Attendance button was not blinking after inserting NFC card during attendance session
  • Voting buttons were not blinking after inserting an NFC card during a voting session
• MXC640
  • "Total" text was not translated for 5-button voting
• MXCMIU
  • Left button functionality Exclusive was not working
• MXCIC
  • The Request icon was cut in the right side
  • Microphone LED was turning off after receiving a “channel occupied” message
  • Two interpreter devices can have same booth and desk number

Known Issues

• Some units in systems with greater than 150 units may not be shown in the Network Topology report.
• Some units may reset when cable breaks in a loop on an EX 6010 unit.
• MXC640
  • Manually entered voting results are not shown if a normal voting session has not been started first
  • The agenda subject name for a manually entered result may be wrong
  • It is not possible to use an MXC640 configured as dual-delegate unit with SW6000 if the use of NFC cards is enabled

Notes

• MXC and DCS 6000 firmware files are packaged together in the same release file.
• To operate MXC devices with version 8.5.1 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SW6000 6.9.11

Release notes cover the following models:

• MXC615
• MXC620/620-F
• MXC630/630-F
• MXC640
• MXCIC
• MXCMIU
• MXCSIGN

Important

• This firmware release can be used to update Microflex Complete (MXC), DCS 6000, or DCS 5900 systems using DIS CCU, CU 5905, CU 6105, or CU 6110 Central Units.
• Systems using CU 6000, CU 6005, CU 6010 and CU 6011 Central Units are not supported in this release.
• Firmware Upgrade Utility (FUU) v1684, which is included in the release, is required to update MXC devices. In the FUU, MXC devices will be designated with an "-A" suffix.

New Features

DIS-CCU (6000 Mode)

• Support for Dual delegate role
• Real-time diagnostics for MXC units:
  • Loop problem (due to cable or unit failure)
  • Unit offline/online status
  • Low voltage level
  • Alerts appear in the event log
• DCS-LAN network topology information for MXC units
• Activation of LED indication for units in chain and in loop
• Save and restore CCU settings
• TPCI commands showing when interpreter audio is present on interpreter channels

MXCMIU

• Support for Dual Delegate role when used with two MXCMIU-FL/FS front plates connected to the HDMI A and B connectors (supports dual microphones, dual loudspeakers, dual LEDs)

MXC615

• Support for Dual Delegate role

MXC620

• Support for Dual Delegate role (except NFC ID card functionality)

MXC640

• Support for Dual Delegate role (except NFC ID card functionality)
• Participant speech timer appears on MXC640 screen when used with SW6000 software
• Ability in SW6000 software to allow all participants with a specific role (e.g. Delegate) to view or hide the speak/request list on their MXC640 screen
• Chairman can start/stop meetings on MXC640 (meetings must be set up in SW6000 software)
• Support for 2-button (Yes/No) voting in standalone mode without SW6000 software
• Ability to upload startup screen image/logo via Firmware Update Utility
• Support for up to 1000 agenda items
• 3 additional screen languages (Thai, Turkish, Lithuanian added; brings total to 17)

MXCIC

• Interpreter can view the Speak/Request list on MXCIC screen (when used standalone or with SW6000)
• "Slow" button now active
• Language Pre-select control behavior changed: Language selection is now activated on release of a pre-select button, in addition to clicking the rotary button to confirm. Also, pressing or turning the rotary button while holding a pre-select button launches the pre-select language list.

Improvements

MXC640

• Improvements to result note display
• All language-based properties at meeting end
• Info in the top menu is updated

Bug Fixes

DIS-CCU

• Corrected a bug where seat numbers were not sorted in the Participant Setup page

MXC640

• Corrected bugs where
  • it was not possible to set a subject active
  • the Speak button LED does not blink when unit is next in the request list in FIFO mode
  • the unit language is not changed back to system language after the user is logged out or after stopping the meeting

Known Issues

• When the system uses SW6000, voting result labels in TCP/IP control strings are shifted.
• During boot up, there may be a spike on the analog output.
• Some units in systems >150 units may not be shown in the Topology report.
• Some units may reset when cable breaks in a loop on an EX 6010 unit.
• The Event log in DIS-CCU CGUI does not work when SW6000 is connected and a meeting is started.
• MXC640
  • When an agenda with max. items and with max. words in the item name and descriptions is received, the GUI may not be responsive for a period of time
  • Manually entered voting results are not shown if a normal voting session has not been started first
  • The agenda subject name for a manually entered result may be wrong
  • It is not possible to use an MXC640 configured as dual delegate with SW6000 if the use of NFC cards is enabled
  • Re-doing an attendance check might make the attendance button nonoperational
  • The percent indication in the Voting Result screen may not be correct for user-specified voting configurations
• MXCMIU
  • The Exclusive button does not work if configured to the function button (left button)

Notes

• MXC and DCS 6000 firmware files are packaged together in the same release file.
• To operate MXC devices with release version 8.5.0 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • DCS 6000 8.5.0
  • SW6000 6.8.33a
  • Shure NFC Programming App 1.0.3

Release notes cover the following models:

• MXC615
• MXC620/620-F
• MXC630/630-F
• MXC640
• MXCIC
• MXCMIU
• MXCSIGN

Important

• This firmware release can be used to update Microflex Complete (MXC), DCS 6000, or DCS 5900 systems using DIS CCU, CU 6105 or CU 6110 Central Units.
• Systems using CU 6000, CU 6005, CU 6010 and CU 6011 Central Units are not supported in this release.
• Firmware Upgrade Utility (FUU) v1660, which is included in the release, is required to update MXC devices. In the FUU, MXC devices will be designated with an "-A" suffix.

New Features

DIS-CCU (6000 Mode), CU 61XX

• Support for Microflex Complete MXC640, MXCIC, MXCMIU, and MXCSIGN.
• Ability to setup up MXCSIGN dual side e-paper information display.

MXC

• Support for configuring DCS LAN Redundant Loop (using MXC-ACC-RIB unit)
• Speak Button Lock

Improvements

• Support for setting GUI language in MXC640
• Updated UI labels to match Microflex Complete Wireless
• FUU_Firmware_Upgrade renamed to MXC_Firmware_Upgrade_Utility

Bug Fixes

• DIS-CCU: Exclusive Functionality does not switch a shared microphone back on when removed.
• No audio from a shared microphone after an un-mute.

Known Issues

• When the system uses SW6000, voting result labels in TCP/IP control strings are shifted.
• During boot up, there may be a spike on analog out.
• MXC640
  • Reply/request list is responding slow with more than 50/50 in their respective lists.
  • Scrolling through an agenda with 100+ items is slow.
  • When an agenda with max. items and with max. words in item name and descriptions is received, the GUI may not be responsive for a period of time.
  • Manually entered voting results are not shown if voting has not yet started.
  • The agenda subject name for a manually entered result may be wrong if the participant has not closed the voting result screen after the last voting session.
  • “Rep on” and “Rep off”' buttons are missing in the UI with chairman left button configured to “Reply.”

Notes

• MXC and DCS 6000 firmware files are packaged together in the same release file.
• To operate MXC devices with release version 8.4.2 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • DCS 6000 8.4.2
  • SW6000 6.7.8
  • Shure NFP Programming App 1.0.3