Software & Firmware Archives

Improvements

• Added support for updating the following devices:
  • AD and ADX Transmitters
  • AD4D Two-Channel Receiver
  • AD4Q Four-Channel Receiver
  • AD610 Diversity ShowLink Access Point
  • ULXD6/8 Transmitters
  • SBC240/450/840/840M/850 Networked Charging Stations
• Added support for the following new frequency band:
  • QLX-D G62

Known Issues

• Attempts to download ULXD6/8 transmitter firmware to a ULX-D or QLX-D receiver that is not at the minimum firmware version will fail. To update firmware for ULXD6/8 transmitters with ULX-D or QLX-D receivers:
  1. Update receivers to the following minimum versions:
     • ULXD4, ULXD4D, ULXD4Q Receivers 2.1.16
     • QLXD4 Receivers 2.1.5
  2. Using Shure Update Utility, download ULXD6/8 transmitter firmware to the receivers.
  3. Using the FW Update menu on a receiver, update transmitters.
• Microflex Wireless devices running version 1.X firmware must first be updated to version 2.0.5 before being updated to version 3.X or later.

Notes

• Shure Update Utility (SUU) version 2.4 requires 64-bit operating systems. To install SUU on a 32-bit computer, download version 2.2.2: Windows 7, 8, 10 or Mac OS X 10.9 – 10.11
• Installing Shure Update Utility on Windows will also prompt the installation of a USB driver, which must be installed to support updating USB devices, like GLX-D.
• KSE1500, SHA900 and GLX-D (USB 2.0 connected devices) must be updated one at a time.
• USB hubs are not recommended when updating USB 2.0 connected devices. Always connect these devices directly to a USB terminal of the computer running Shure Update Utility.
• Shure Update Utility 2.4 is compatible with Wireless Workbench 6.12.2 or later.

New Feature

• Initial release

Notes

• To operate AD4Q version 1.0.17 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 Transmitters 1.0.17
  • Axient Digital AD4D/Q Receivers 1.0.17
  • Axient AXT600 Spectrum Manager 2.0.X
  • SBRC Shure Battery Rack Charger 1.0.1
  • Shure Update Utility 2.4
  • ShurePlus Channels 1.4
  • Wireless Workbench 6.12.2

New Feature

• Initial release

Notes

• To operate AD4D version 1.0.17 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 Transmitters 1.0.17
  • Axient Digital AD4D/Q Receivers 1.0.17
  • Axient AXT600 Spectrum Manager 2.0.X
  • SBRC Shure Battery Rack Charger 1.0.1
  • Shure Update Utility 2.4
  • ShurePlus Channels 1.4
  • Wireless Workbench 6.12.2

Hotfix

Important

• This version is a hotfix for use in systems with CU 6105, CU 6110 and DIS-CCU Central Units only
• This version cannot be used to upgrade systems using CU 6005, CU 6010 or CU 6011 Central Units
• This version is compatible with SW6000 Software License file v1.7 only
  • If upgrading from SW6000 v6.0.xxx or later, a new SW6000 license is not needed
  • If upgrading from SW6000 v5.8.xxx or earlier, a new SW6000 license is needed

Bug Fixes

CUA

• Fixed an error where Pause / Resume meeting did not restore request list in the correct sorting order
• Fixed an error where Pause / Resume meeting did not restore all entries in the request list

Version 6.5.25

Release Date: 6/23/2017

Feature Release

Important

• This version is a feature release for use in systems with CU 6105, CU 6110 and DIS-CCU Central Units only
• This version cannot be used to upgrade systems using CU 6005, CU 6010 or CU 6011 Central Units
• This version can upgrade SW6000 from all previous SW6000 versions
• This version is compatible with SW6000 Software License file v1.7 only
  • If upgrading from SW6000 v6.0.xxx or later, a new SW6000 license is not needed
  • If upgrading from SW6000 v5.8.xxx or earlier, a new SW6000 license is needed

New Features

• Added speech counter in CUA Microphone and Main display
• Added speech counter configuration in CAA/Participant List Configuration
• Added option to configure the voting mimic icons used in the CDA
• Added configuration option in CAA/Configuration/Voting Configuration
• CAA: Report generation time reduced (all reports)
• CDA: Added command-line option to disable page switching
• CUA: Button configuration for speak button and voting buttons color added in the ‘prjCUA.exe.config’ file

Bug Fixes

CUA

• Fixed an error
  • where Pause / Resume meeting did not restore request list
  • for missing Meeting Role information in CUA after using CAA Conference Unit ‘Replace Unit’
  • where CUA Mimic shows assigned user in the meeting mode: ‘Code On List
  • where the Microphone in ‘Manual + reply’ mode cannot be not removed from request list when turned on from Mimic and Mic. ext. control
  • where the manual timer updates anomaly
  • where a participant cannot re-login
  • where the Meeting Role is not updated properly in CUA when Speaker is set for an agenda subject
  • where the buttons ‘Set agenda status’ do not have their own labels (3 labels)

CAA

• Fixed errors with
  • the agenda, when assigning a speaker to an Agenda Subject in a Meeting
  • Room Configuration. Meeting Role is not being applied to a unit
  • Voting reports - individual participants are listed multiple times each
  • Voting reports - missing some results from proxy delegates
  • participants votes, which are ignoring the use of voting weight
  • Label 507, which is used in some wrong places
  • Participant Table, unable to clear Replacement For …..
  • duplicated user ID in Prepared Participant List
  • printing reports from CUA
  • editing a Participant Seat Table
  • the Participant Seat Table, where participants cannot be moved from one seat to another in the table
  • the language selection menu 'Invariant Language (Invariant Country)
  • an CAA Exception: when adding participants in Meeting Mode: Prepared Participant List
  • importing the ‘Default Participant Table’ to a ‘Prepared Participant Table’

CDA

• Fixed an error
  • with Logged In display: Wrong Group shown for meeting using’ Participants Lists’
  • with Microphone Display: Pause speech timer indicator missing
  • with Microphone Display: Speech time count down timer keeps on blinking, red color does not stop after time has run out or the meeting is stopped
  • with font size in skin editor

CUI

• CUI Fix for Web service exception with very large agenda: Maximum request length exceeded
• ‘Pooltime’ default value changed to 200ms (can also be set in command line). Note: This time shall still be set using CUI command line parameter for customers using automatic login on preferred seat in large system

Reports

• Participant Meeting Report, ID 1243 – Fix for show time for non-participating participants
• Participant Statistical Report - Fix for incorrect if changes occur while CAA is open with active meeting
• Participant Statistical Report - Participant Speech Time is not updated properly
• Meeting Log report – sub repor6t parameters missing Vote report(s) with Groups - missing 'No Group' in Group Voting Result table Meeting Log Report - generation failed (on Russian database)

Installer

• Prevent installing on systems where SQL server version is 2005 or earlier

Recommendation

Update all MXA910 devices in a configuration to the same firmware version.

New Features

• AES67
• Audio Encryption support with MXA910, MXA310, ANI4IN, ANI4OUT, ANIUSB-MATRIX, ANI22 and P300-IMX.
• Packet Bridge
• PEQ copy/paste and import/export options

Improvements

• Configuration
  • PEQ tab added
  • Revised templates for better out-of-the-box room coverage
• Presets
  • "Default Settings" added as a preset
  • Name of the active preset displays above the Preset drop-down
  • "Clear Preset" option added to "Save As Preset"
• Improved auto position performance
• Device names can now begin with a number
• New commands strings
• Fixed an IP configuration issue in manual mode that prevents setting IP address w.x.y.z with subnet mask 255.0.0.0 for class A networks.
• General bug fixes

Known Issue

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

• MXA910: User Guide | Command Strings
• MXA910 version 2.0.8 is compatible with MXA910 devices running version 2.0.8 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate MXA910 version 2.0.8 with Dante™ Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate MXA910 version 2.0.8 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI4IN 2.0.7
  • ANI4OUT 2.0.8
  • MXA310 2.0.8
  • Microflex Wireless 5.1.23
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.3.0.18
  • Shure Web Device Discovery 1.1

New Features

• Audio Encryption support with MXA910, MXA310, ANI4IN, ANI4OUT, ANIUSB-MATRIX, ANI22 and P300-IMX.
• Packet Bridge
• PEQ import/export options

Improvements

• Integrates Audinate's Dante™ Ultimo firmware update, which resolves a rare audio loss issue that can occur when devices are static for longer than 1 month.
• Configuration
  • "Add/Remove Channel" button added on Coverage tab
• Presets
  • "Default Settings" added as a preset
  • Name of the active preset displays above the Preset drop-down
  • "Clear Preset" option added to "Save As Preset"
• Device names can now begin with a number
• New command strings
• Fixed an IP configuration issue in manual mode that prevents setting IP address w.x.y.z with subnet mask 255.0.0.0 for class A networks.
• General bug fixes

Known Issues

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
• Encryption may become disabled in an extremely rare case after a power cycle of the device; users must re-enable encryption in the UI if this occurs.
• If Channel 1 is removed using the Add/Remove Channel feature and Channel 2, 3, or 4 is left as a single channel, then audio will not pass through the Automix Out channel. Channel 1 is the only channel that passes audio through the Automix Out channel.

Notes

• MXA310: User Guide | Command Strings
• MXA310 version 2.0.7 is compatible with MXA310 devices running version 2.0.7 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate MXA310 version 2.0.7 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate MXA310 version 2.0.7 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI4IN 2.0.7
  • ANI4OUT 2.0.8
  • MXA910 2.0.8
  • Microflex Wireless 5.1.23
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.3.0.18
  • Shure Web Device Discovery 1.1

New Features

• Audio Encryption support with MXA910, MXA310, ANI4IN, ANI4OUT, ANIUSB-MATRIX, ANI22 and P300-IMX.
• Packet Bridge
• PEQ copy/paste and import/export options

Improvements

• Integrates Audinate's Dante™ Ultimo firmware update, which resolves a rare audio loss issue that can occur when devices are static for longer than 1 month.
• Configuration
  • PEQ tab added
• Presets
  • "Default Settings" added as a preset
  • Name of the active preset displays above the Preset drop-down
  • "Clear Preset" option added to "Save As Preset"
• Device names can now begin with a number
• New commands strings
• Fixed an IP configuration issue in manual mode that prevents setting IP address w.x.y.z with subnet mask 255.0.0.0 for class A networks.
• General bug fixes

Known Issue

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

• ANI4OUT: User Guide | Command Strings
• ANI4OUT version 2.0.8 is compatible with ANI4OUT devices running version 2.0.8 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate ANI4OUT version 2.0.8 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate ANI4OUT version 2.0.8 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI4IN 2.0.7
  • ANI4OUT 2.0.8
  • MXA910 2.0.8
  • Microflex Wireless 5.1.23
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.3.0.18
  • Shure Web Device Discovery 1.1

New Features

• Audio Encryption support with MXA910, MXA310, ANI4IN, ANI4OUT, ANIUSB-MATRIX, ANI22 and P300-IMX.
• Packet Bridge
• PEQ copy/paste and import/export options

Improvements

• Integrates Audinate's Dante™ Ultimo firmware update, which resolves a rare audio loss issue that can occur when devices are static for longer than 1 month.
• Configuration
  • PEQ tab added
• Presets
  • "Default Settings" added as a preset
  • Name of the active preset displays above the Preset drop-down
  • "Clear Preset" option added to "Save As Preset"
• Device names can now begin with a number
• New commands strings
• Fixed an IP configuration issue in manual mode that prevents setting IP address w.x.y.z with subnet mask 255.0.0.0 for class A networks.
• General bug fixes

Known Issue

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

• ANI4IN: User Guide | Command Strings
• ANI4IN version 2.0.7 is compatible with ANI4IN devices running version 2.0.7 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate ANI4IN version 2.0.7 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate ANI4IN version 2.0.7 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI4IN 2.0.7
  • ANI4OUT 2.0.8
  • MXA910 2.0.8
  • Microflex Wireless 5.1.23
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.3.0.18
  • Shure Web Device Discovery 1.1

New Features

• Audio Encryption support with MXA910, MXA310, ANI4IN, ANI4OUT, ANIUSB-MATRIX, ANI22 and P300-IMX.
• Packet Bridge
• PEQ import/export options

Improvements

• Integrates Audinate's Dante™ Ultimo firmware update, which resolves a rare audio loss issue that can occur when devices are static for longer than 1 month.
• Configuration
  • "Add/Remove Channel" button added on Coverage tab
• Presets
  • "Default Settings" added as a preset
  • Name of the active preset displays above the Preset drop-down
  • "Clear Preset" option added to "Save As Preset"
• Device names can now begin with a number
• New command strings
• Fixed an IP configuration issue in manual mode that prevents setting IP address w.x.y.z with subnet mask 255.0.0.0 for class A networks.
• General bug fixes

Known Issues

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
• Encryption may become disabled in an extremely rare case after a power cycle of the device; users must re-enable encryption in the UI if this occurs.
• If Channel 1 is removed using the Add/Remove Channel feature and Channel 2, 3, or 4 is left as a single channel, then audio will not pass through the Automix Out channel. Channel 1 is the only channel that passes audio through the Automix Out channel.

Notes

• MXA310: User Guide | Command Strings
• MXA310 version 2.0.7 is compatible with MXA310 devices running version 2.0.7 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate MXA310 version 2.0.7 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate MXA310 version 2.0.7 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI4IN 2.0.7
  • ANI4OUT 2.0.8
  • MXA910 2.0.8
  • Microflex Wireless 5.1.23
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.3.0.18
  • Shure Web Device Discovery 1.1

New Features

• Audio Encryption support with MXA910, MXA310, ANI4IN, ANI4OUT, ANIUSB-MATRIX, ANI22 and P300-IMX.
• Packet Bridge
• PEQ copy/paste and import/export options

Improvements

• Integrates Audinate's Dante™ Ultimo firmware update, which resolves a rare audio loss issue that can occur when devices are static for longer than 1 month.
• Configuration
  • PEQ tab added
• Presets
  • "Default Settings" added as a preset
  • Name of the active preset displays above the Preset drop-down
  • "Clear Preset" option added to "Save As Preset"
• Device names can now begin with a number
• New commands strings
• Fixed an IP configuration issue in manual mode that prevents setting IP address w.x.y.z with subnet mask 255.0.0.0 for class A networks.
• General bug fixes

Known Issue

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

• ANI4OUT: User Guide | Command Strings
• ANI4OUT version 2.0.8 is compatible with ANI4OUT devices running version 2.0.8 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate ANI4OUT version 2.0.8 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate ANI4OUT version 2.0.8 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI4IN 2.0.7
  • ANI4OUT 2.0.8
  • MXA910 2.0.8
  • Microflex Wireless 5.1.23
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.3.0.18
  • Shure Web Device Discovery 1.1