Software & Firmware Archives

IMPROVEMENTS

• GUI added for viewing and entering gateway and IP address to achieve cross-subnet monitoring and control.
• Supports discovery over the network ULX-D and QLX-D receivers in X52, X53 and X54 bands.*
• Supports discovery over the network ULX-D receivers in the Z16 band.*

*AXT600 is capable of discovering ULX-D and QLX-D receivers in X52, X53, X54 and Z16 bands. AXT600 will continue to scan within the range of 470-865, 925-952MHz. In the AXT600 band summary list, any band that is not fully supported due to non-tunable frequencies is tagged with *. In the AXT600 CFL list, non-tunable frequencies are indicated with "Monitor for WWB (unknown dBm)". When listening to CFL frequencies, switching to a non-tunable frequency will turn the Listen mode off. The AXT600 CFL Edit/Add menu will allow any frequency for any band, not limited to tunable frequencies.

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.16.11:
  • UR4 UHF-R receiver 1.171
  • UR3 Plug-on Transmitter 1.0.0.16
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4X ULX-D Receivers 1.6.11
  • QLXD4 QLX-D Receiver 1.1.15
  • P10T PSM1000 Transmitter 1.3.9
  • Wireless Workbench 6.11.3

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.16.11:
  • UR4 UHF-R receiver 1.171
  • UR3 Plug-on Transmitter 1.0.0.16
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4X ULX-D Receivers 1.6.11
  • QLXD4 QLX-D Receiver 1.1.15
  • P10T PSM1000 Transmitter 1.3.9
  • Wireless Workbench 6.11.3

IMPROVEMENTS

• Graphic User Interface (GUI) added for viewing and entering gateway and IP address to achieve cross-subnet monitoring and control.

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.16.11:
  • UR4 UHF-R receiver 1.171
  • UR3 Plug-on Transmitter 1.0.0.16
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4X ULX-D Receivers 1.6.11
  • QLXD4 QLX-D Receiver 1.1.15
  • P10T PSM1000 Transmitter 1.3.9
  • Wireless Workbench 6.11.3

IMPROVEMENTS

• Graphic User Interface (GUI) added for viewing and entering gateway and IP address to achieve cross-subnet monitoring and control.

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.16.11:
  • UR4 UHF-R receiver 1.171
  • UR3 Plug-on Transmitter 1.0.0.16
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4X ULX-D Receivers 1.6.11
  • QLXD4 QLX-D Receiver 1.1.15
  • P10T PSM1000 Transmitter 1.3.9
  • Wireless Workbench 6.11.3

New Features

• Added support for AXT100 Talk Switch capabilities. This update requires supporting Axient firmware (1.16)

Improvements

• Added compatibility with Windows 10 and Mac OS X El Capitan.
• Added support for new QLX-D bands in the ISM range: X52, X53, X54.
• Added support for new ULX-D band: Z16.
  • In order to support this new band, the plot ranges in the Coordination Plot and Frequency Plot have been extended.
• Updated TV Data for Italy, Belgium, and the Netherlands.

Known Issues

• If you are running the Mac OS X Yosemite Operating System, be sure to run version 10.10.4 or later. Earlier beta versions of the Operating System are not supported.
• On Macs, when users open show files and launch the Frequency Analysis dialog (by checking the checkbox and pressing “Analyze”), the Frequency Coordination tab may stop responding to keyboard inputs (for example, editing or deleting frequencies with the keyboard). To work around this issue, select another tab in the application (e.g.: Inventory or Monitor) and then reselect the Frequency Coordination tab.
• SLX and ULX frequencies in Master List mode cannot be manually entered in the Coordination Workspace. They can, however, be coordinated and analyzed.
• When scanning with AXT400 receivers, the Band Preset value in the Live Scan Settings dialog does not always stay in sync with the currently selected band of the receiver. The Band Preset can be manually changed to scan any supported range.
• Alerts logged when devices first come online may list device parameters and their values as they are being discovered even though the parameter values themselves have not changed.

Notes

• In order to monitor and control networked devices, you must be connected to the same subnet. Cross-subnet connections to a network of gear are not supported.
• Tags that have been added to a show file but are not assigned to any devices are not saved within the show file.
• Opening show files created with older versions of Wireless Workbench may result in the Settings Conflicts dialog opening once the file has loaded. This is due to newly supported hardware parameters that have been introduced with updated firmware versions. To maintain all settings from the show file, select "Keep all settings from: Wireless Workbench".
• On machines running Windows 7, Wireless Workbench will not be able to discover devices when the machine has fallen back to its 169.254.xxx.yyy fallback IP address, regardless of the IP addressing of the connected Shure devices. To address this, perform one of the following:
  • Insert a DHCP server onto your network and set your machine and Shure devices to accept automatic IP addressing.
  • Statically assign your machine's IP address to the 169.254.xxx.yyy fallback subnet with a different IP address than the one it fell back to originally.

IMPROVEMENTS

• Added new frequency bands:
  • Americas (except Brazil): X52: 902-928 MHz
  • Brazil: X53: 902-907.5, 915-928 MHz
  • Australia: X54: 915-928 MHz

NOTES

• For operation of QLX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with QLX-D version 1.1.15:
  • ULXD1/2 ULX-D Transmitters 1.6.10
  • Wireless Workbench 6.11.3

IMPROVEMENTS

• Added new frequency bands:
  • Americas (except Brazil): X52: 902-928 MHz
  • Brazil: X53: 902-907.5, 915-928 MHz
  • Australia: X54: 915-928 MHz

NOTES

• For operation of QLX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with QLX-D version 1.1.15:
  • ULXD1/2 ULX-D Transmitters 1.6.10
  • Wireless Workbench 6.11.3

IMPROVEMENTS

• Improved network stability.
• Added new frequency bands:
  • Americas (except Brazil): X52: 902-928 MHz
  • Brazil: X53: 902-907.5, 915-928 MHz
  • Australia: X54: 915-928 MHz

NOTES

• For operation of QLX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with QLX-D version 1.1.15:
  • ULXD1/2 ULX-D Transmitters 1.6.10
  • Wireless Workbench 6.11.3

IMPROVEMENTS

• Improved network stability.
• Added new frequency bands:
  • Americas (except Brazil): X52: 902-928 MHz
  • Brazil: X53: 902-907.5, 915-928 MHz
  • Australia: X54: 915-928 MHz

NOTES

• For operation of QLX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with QLX-D version 1.1.15:
  • ULXD1/2 ULX-D Transmitters 1.6.10
  • Wireless Workbench 6.11.3

Improvement

• Added new frequency band Z16 (1240 – 1260 MHz) for Japan

Notes

• Fixed bug relating to encryption mismatch conditions.
• Fixed IR LED behavior when firmware updating transmitters.
• Transmitters to be used with receivers must be updated via IR. After the receiver is updated, follow these steps:
  1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
  2. Align the infrared ports with the transmitter
  3. Press ENTER.
• For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.7.34:
  • QLX-D receiver 1.0.15