Software & Firmware Archives
These release notes cover the following models:
- MXWNCS2/4/8 Networked Charging Stations
- MXWANI4/8 Audio Network Interfaces
- MXWAPT2/4/8 Access Point Transceivers
- MXW1/2/6/8 Wireless Microphones
Related Links
Improvements
- Implementation of additional security features, including expanded password capabilities
- MXW devices now advertise Dante/AES67 capability in the Shure Web Device Discovery Application
- New Device Reboot button added to the MXWANI Web UI.
- Improvements to the microphones’ out-of-range detection capabilities when moved outside the wireless coverage area of the MXWAPT.
Japan-specific improvements:
- J-DECT update: Microflex Wireless now features up to 96 channels in HD mode to meet J-DECT requirements, adding additional channels (dependent on modes and interference) as well as an improved handling of PHS presence.
In areas with no PHS interference, the new maximum channel capacity is:
| Pre 8.0.3 FW Versions | After 8.0.3 FW Update |
| 40 SD channels | 48 SD Channels |
| 80 HD channels | 96 HD Channels |
However, when PHS interference is present, the maximum number of channels changes to:
| Pre 8.0.3 FW Versions | After 8.0.3 FW Update |
| 16 SD channels | 32 SD Channels |
| 32 HD channels | 64 HD Channels |
Important Note: For customers in Japan that have an existing MXW installation, a unique, one-off update procedure must be performed to take advantage of these additional microphone channels. Without this procedure, the other improvements mentioned above will still take effect but without the J-DECT update. This procedure needs to be conducted onsite by Shure personnel — please contact your local Shure representative for details.
Bug Fixes
- APT2 is not discovered by Shure Device Discovery app following a reboot or factory reset using Dante Controller
- Spectrum scan on an MXW-APT no longer responsive after Density-Mode change
- Spectrum scan calculation of available channels in a given RF environment shows wrong results
- Mics lose pairing after Density-Mode change
- MXW8: Carrier mismatch strings not being shown in selected language
Known Issues
- SystemOn 3.0.1 is compatible with MXW 8.0.3, but will incorrectly warn “Check system requirements, your current firmware version may not be confirmed compatible.”
- Multiple Grand Master Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
- MXWAPT8: MCU/GUI - Older firmware microphones are not shown in Utility tab
Notes
- To operate MXW version 8.0.3 with other Shure networked systems, see the following list of minimum software and firmware versions:
- SCM820 1.3.3
- Shure Web Device Discovery 1.2.5Shure Update Utility 2.4.6
- SystemOn 3.2
These release notes cover the following models:
- MXWNCS2/4/8 Networked Charging Stations
- MXWANI4/8 Audio Network Interfaces
- MXWAPT2/4/8 Access Point Transceivers
- MXW1/2/6/8 Wireless Microphones
Related Links
Improvements
- Implementation of additional security features, including expanded password capabilities
- MXW devices now advertise Dante/AES67 capability in the Shure Web Device Discovery Application
- New Device Reboot button added to the MXWANI Web UI.
- Improvements to the microphones’ out-of-range detection capabilities when moved outside the wireless coverage area of the MXWAPT.
Japan-specific improvements:
- J-DECT update: Microflex Wireless now features up to 96 channels in HD mode to meet J-DECT requirements, adding additional channels (dependent on modes and interference) as well as an improved handling of PHS presence.
In areas with no PHS interference, the new maximum channel capacity is:
| Pre 8.0.3 FW Versions | After 8.0.3 FW Update |
| 40 SD channels | 48 SD Channels |
| 80 HD channels | 96 HD Channels |
However, when PHS interference is present, the maximum number of channels changes to:
| Pre 8.0.3 FW Versions | After 8.0.3 FW Update |
| 16 SD channels | 32 SD Channels |
| 32 HD channels | 64 HD Channels |
Important Note: For customers in Japan that have an existing MXW installation, a unique, one-off update procedure must be performed to take advantage of these additional microphone channels. Without this procedure, the other improvements mentioned above will still take effect but without the J-DECT update. This procedure needs to be conducted onsite by Shure personnel — please contact your local Shure representative for details.
Bug Fixes
- APT2 is not discovered by Shure Device Discovery app following a reboot or factory reset using Dante Controller
- Spectrum scan on an MXW-APT no longer responsive after Density-Mode change
- Spectrum scan calculation of available channels in a given RF environment shows wrong results
- Mics lose pairing after Density-Mode change
- MXW8: Carrier mismatch strings not being shown in selected language
Known Issues
- SystemOn 3.0.1 is compatible with MXW 8.0.3, but will incorrectly warn “Check system requirements, your current firmware version may not be confirmed compatible.”
- Multiple Grand Master Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
- MXWAPT8: MCU/GUI - Older firmware microphones are not shown in Utility tab
Notes
- To operate MXW version 8.0.3 with other Shure networked systems, see the following list of minimum software and firmware versions:
- SCM820 1.3.3
- Shure Web Device Discovery 1.2.5Shure Update Utility 2.4.6
- SystemOn 3.2
These release notes cover the following models:
- MXWNCS2/4/8 Networked Charging Stations
- MXWANI4/8 Audio Network Interfaces
- MXWAPT2/4/8 Access Point Transceivers
- MXW1/2/6/8 Wireless Microphones
Related Links
Improvements
- Implementation of additional security features, including expanded password capabilities
- MXW devices now advertise Dante/AES67 capability in the Shure Web Device Discovery Application
- New Device Reboot button added to the MXWANI Web UI.
- Improvements to the microphones’ out-of-range detection capabilities when moved outside the wireless coverage area of the MXWAPT.
Japan-specific improvements:
- J-DECT update: Microflex Wireless now features up to 96 channels in HD mode to meet J-DECT requirements, adding additional channels (dependent on modes and interference) as well as an improved handling of PHS presence.
In areas with no PHS interference, the new maximum channel capacity is:
| Pre 8.0.3 FW Versions | After 8.0.3 FW Update |
| 40 SD channels | 48 SD Channels |
| 80 HD channels | 96 HD Channels |
However, when PHS interference is present, the maximum number of channels changes to:
| Pre 8.0.3 FW Versions | After 8.0.3 FW Update |
| 16 SD channels | 32 SD Channels |
| 32 HD channels | 64 HD Channels |
Important Note: For customers in Japan that have an existing MXW installation, a unique, one-off update procedure must be performed to take advantage of these additional microphone channels. Without this procedure, the other improvements mentioned above will still take effect but without the J-DECT update. This procedure needs to be conducted onsite by Shure personnel — please contact your local Shure representative for details.
Bug Fixes
- APT2 is not discovered by Shure Device Discovery app following a reboot or factory reset using Dante Controller
- Spectrum scan on an MXW-APT no longer responsive after Density-Mode change
- Spectrum scan calculation of available channels in a given RF environment shows wrong results
- Mics lose pairing after Density-Mode change
- MXW8: Carrier mismatch strings not being shown in selected language
Known Issues
- SystemOn 3.0.1 is compatible with MXW 8.0.3, but will incorrectly warn “Check system requirements, your current firmware version may not be confirmed compatible.”
- Multiple Grand Master Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
- MXWAPT8: MCU/GUI - Older firmware microphones are not shown in Utility tab
Notes
- To operate MXW version 8.0.3 with other Shure networked systems, see the following list of minimum software and firmware versions:
- SCM820 1.3.3
- Shure Web Device Discovery 1.2.5Shure Update Utility 2.4.6
- SystemOn 3.2
These release notes cover the following models:
- MXWNCS2/4/8 Networked Charging Stations
- MXWANI4/8 Audio Network Interfaces
- MXWAPT2/4/8 Access Point Transceivers
- MXW1/2/6/8 Wireless Microphones
Related Links
Improvements
- Implementation of additional security features, including expanded password capabilities
- MXW devices now advertise Dante/AES67 capability in the Shure Web Device Discovery Application
- New Device Reboot button added to the MXWANI Web UI.
- Improvements to the microphones’ out-of-range detection capabilities when moved outside the wireless coverage area of the MXWAPT.
Japan-specific improvements:
- J-DECT update: Microflex Wireless now features up to 96 channels in HD mode to meet J-DECT requirements, adding additional channels (dependent on modes and interference) as well as an improved handling of PHS presence.
In areas with no PHS interference, the new maximum channel capacity is:
| Pre 8.0.3 FW Versions | After 8.0.3 FW Update |
| 40 SD channels | 48 SD Channels |
| 80 HD channels | 96 HD Channels |
However, when PHS interference is present, the maximum number of channels changes to:
| Pre 8.0.3 FW Versions | After 8.0.3 FW Update |
| 16 SD channels | 32 SD Channels |
| 32 HD channels | 64 HD Channels |
Important Note: For customers in Japan that have an existing MXW installation, a unique, one-off update procedure must be performed to take advantage of these additional microphone channels. Without this procedure, the other improvements mentioned above will still take effect but without the J-DECT update. This procedure needs to be conducted onsite by Shure personnel — please contact your local Shure representative for details.
Bug Fixes
- APT2 is not discovered by Shure Device Discovery app following a reboot or factory reset using Dante Controller
- Spectrum scan on an MXW-APT no longer responsive after Density-Mode change
- Spectrum scan calculation of available channels in a given RF environment shows wrong results
- Mics lose pairing after Density-Mode change
- MXW8: Carrier mismatch strings not being shown in selected language
Known Issues
- SystemOn 3.0.1 is compatible with MXW 8.0.3, but will incorrectly warn “Check system requirements, your current firmware version may not be confirmed compatible.”
- Multiple Grand Master Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
- MXWAPT8: MCU/GUI - Older firmware microphones are not shown in Utility tab
Notes
- To operate MXW version 8.0.3 with other Shure networked systems, see the following list of minimum software and firmware versions:
- SCM820 1.3.3
- Shure Web Device Discovery 1.2.5Shure Update Utility 2.4.6
- SystemOn 3.2
These release notes cover the following models:
- MXWNCS2/4/8 Networked Charging Stations
- MXWANI4/8 Audio Network Interfaces
- MXWAPT2/4/8 Access Point Transceivers
- MXW1/2/6/8 Wireless Microphones
Related Links
Improvements
- Implementation of additional security features, including expanded password capabilities
- MXW devices now advertise Dante/AES67 capability in the Shure Web Device Discovery Application
- New Device Reboot button added to the MXWANI Web UI.
- Improvements to the microphones’ out-of-range detection capabilities when moved outside the wireless coverage area of the MXWAPT.
Japan-specific improvements:
- J-DECT update: Microflex Wireless now features up to 96 channels in HD mode to meet J-DECT requirements, adding additional channels (dependent on modes and interference) as well as an improved handling of PHS presence.
In areas with no PHS interference, the new maximum channel capacity is:
| Pre 8.0.3 FW Versions | After 8.0.3 FW Update |
| 40 SD channels | 48 SD Channels |
| 80 HD channels | 96 HD Channels |
However, when PHS interference is present, the maximum number of channels changes to:
| Pre 8.0.3 FW Versions | After 8.0.3 FW Update |
| 16 SD channels | 32 SD Channels |
| 32 HD channels | 64 HD Channels |
Important Note: For customers in Japan that have an existing MXW installation, a unique, one-off update procedure must be performed to take advantage of these additional microphone channels. Without this procedure, the other improvements mentioned above will still take effect but without the J-DECT update. This procedure needs to be conducted onsite by Shure personnel — please contact your local Shure representative for details.
Bug Fixes
- APT2 is not discovered by Shure Device Discovery app following a reboot or factory reset using Dante Controller
- Spectrum scan on an MXW-APT no longer responsive after Density-Mode change
- Spectrum scan calculation of available channels in a given RF environment shows wrong results
- Mics lose pairing after Density-Mode change
- MXW8: Carrier mismatch strings not being shown in selected language
Known Issues
- SystemOn 3.0.1 is compatible with MXW 8.0.3, but will incorrectly warn “Check system requirements, your current firmware version may not be confirmed compatible.”
- Multiple Grand Master Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
- MXWAPT8: MCU/GUI - Older firmware microphones are not shown in Utility tab
Notes
- To operate MXW version 8.0.3 with other Shure networked systems, see the following list of minimum software and firmware versions:
- SCM820 1.3.3
- Shure Web Device Discovery 1.2.5Shure Update Utility 2.4.6
- SystemOn 3.2
These release notes cover the following models:
- MXWNCS2/4/8 Networked Charging Stations
- MXWANI4/8 Audio Network Interfaces
- MXWAPT2/4/8 Access Point Transceivers
- MXW1/2/6/8 Wireless Microphones
Related Links
Improvements
- Implementation of additional security features, including expanded password capabilities
- MXW devices now advertise Dante/AES67 capability in the Shure Web Device Discovery Application
- New Device Reboot button added to the MXWANI Web UI.
- Improvements to the microphones’ out-of-range detection capabilities when moved outside the wireless coverage area of the MXWAPT.
Japan-specific improvements:
- J-DECT update: Microflex Wireless now features up to 96 channels in HD mode to meet J-DECT requirements, adding additional channels (dependent on modes and interference) as well as an improved handling of PHS presence.
In areas with no PHS interference, the new maximum channel capacity is:
| Pre 8.0.3 FW Versions | After 8.0.3 FW Update |
| 40 SD channels | 48 SD Channels |
| 80 HD channels | 96 HD Channels |
However, when PHS interference is present, the maximum number of channels changes to:
| Pre 8.0.3 FW Versions | After 8.0.3 FW Update |
| 16 SD channels | 32 SD Channels |
| 32 HD channels | 64 HD Channels |
Important Note: For customers in Japan that have an existing MXW installation, a unique, one-off update procedure must be performed to take advantage of these additional microphone channels. Without this procedure, the other improvements mentioned above will still take effect but without the J-DECT update. This procedure needs to be conducted onsite by Shure personnel — please contact your local Shure representative for details.
Bug Fixes
- APT2 is not discovered by Shure Device Discovery app following a reboot or factory reset using Dante Controller
- Spectrum scan on an MXW-APT no longer responsive after Density-Mode change
- Spectrum scan calculation of available channels in a given RF environment shows wrong results
- Mics lose pairing after Density-Mode change
- MXW8: Carrier mismatch strings not being shown in selected language
Known Issues
- SystemOn 3.0.1 is compatible with MXW 8.0.3, but will incorrectly warn “Check system requirements, your current firmware version may not be confirmed compatible.”
- Multiple Grand Master Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
- MXWAPT8: MCU/GUI - Older firmware microphones are not shown in Utility tab
Notes
- To operate MXW version 8.0.3 with other Shure networked systems, see the following list of minimum software and firmware versions:
- SCM820 1.3.3
- Shure Web Device Discovery 1.2.5Shure Update Utility 2.4.6
- SystemOn 3.2
These release notes cover the following models:
- MXWNCS2/4/8 Networked Charging Stations
- MXWANI4/8 Audio Network Interfaces
- MXWAPT2/4/8 Access Point Transceivers
- MXW1/2/6/8 Wireless Microphones
Related Links
Improvements
- Implementation of additional security features, including expanded password capabilities
- MXW devices now advertise Dante/AES67 capability in the Shure Web Device Discovery Application
- New Device Reboot button added to the MXWANI Web UI.
- Improvements to the microphones’ out-of-range detection capabilities when moved outside the wireless coverage area of the MXWAPT.
Japan-specific improvements:
- J-DECT update: Microflex Wireless now features up to 96 channels in HD mode to meet J-DECT requirements, adding additional channels (dependent on modes and interference) as well as an improved handling of PHS presence.
In areas with no PHS interference, the new maximum channel capacity is:
| Pre 8.0.3 FW Versions | After 8.0.3 FW Update |
| 40 SD channels | 48 SD Channels |
| 80 HD channels | 96 HD Channels |
However, when PHS interference is present, the maximum number of channels changes to:
| Pre 8.0.3 FW Versions | After 8.0.3 FW Update |
| 16 SD channels | 32 SD Channels |
| 32 HD channels | 64 HD Channels |
Important Note: For customers in Japan that have an existing MXW installation, a unique, one-off update procedure must be performed to take advantage of these additional microphone channels. Without this procedure, the other improvements mentioned above will still take effect but without the J-DECT update. This procedure needs to be conducted onsite by Shure personnel — please contact your local Shure representative for details.
Bug Fixes
- APT2 is not discovered by Shure Device Discovery app following a reboot or factory reset using Dante Controller
- Spectrum scan on an MXW-APT no longer responsive after Density-Mode change
- Spectrum scan calculation of available channels in a given RF environment shows wrong results
- Mics lose pairing after Density-Mode change
- MXW8: Carrier mismatch strings not being shown in selected language
Known Issues
- SystemOn 3.0.1 is compatible with MXW 8.0.3, but will incorrectly warn “Check system requirements, your current firmware version may not be confirmed compatible.”
- Multiple Grand Master Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
- MXWAPT8: MCU/GUI - Older firmware microphones are not shown in Utility tab
Notes
- To operate MXW version 8.0.3 with other Shure networked systems, see the following list of minimum software and firmware versions:
- SCM820 1.3.3
- Shure Web Device Discovery 1.2.5Shure Update Utility 2.4.6
- SystemOn 3.2
Important
QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.
Improvements
- Support for new frequency bands:
- Thailand 694 – 703 MHz frequency band (M19)
- Thailand 748 – 758 MHz frequency band (Q12)
Notes
- To operate QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on version 2.X firmware or later.
- To operate QLX-D version 2.3.22 devices with other Shure networked systems and software, see the following list of minimum versions:
- ULX-D ULXD4/4D/4Q Receivers 2.4.9
- Axient AXT600 Spectrum Manager 2.1.22
- PSM1000 P10T Transmitters 1.7.6
- Wireless Workbench 6.13.1
- Shure Update Utility 2.4.6
- ShurePlus Channels 1.4.2
Important
QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.
Improvements
- Support for new frequency bands:
- Thailand 694 – 703 MHz frequency band (M19)
- Thailand 748 – 758 MHz frequency band (Q12)
Notes
- To operate QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on version 2.X firmware or later.
- To operate QLX-D version 2.3.22 devices with other Shure networked systems and software, see the following list of minimum versions:
- ULX-D ULXD4/4D/4Q Receivers 2.4.9
- Axient AXT600 Spectrum Manager 2.1.22
- PSM1000 P10T Transmitters 1.7.6
- Wireless Workbench 6.13.1
- Shure Update Utility 2.4.6
- ShurePlus Channels 1.4.2
Important
QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.
Improvements
- Support for new frequency bands:
- Thailand 694 – 703 MHz frequency band (M19)
- Thailand 748 – 758 MHz frequency band (Q12)
Notes
- To operate QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on version 2.X firmware or later.
- To operate QLX-D version 2.3.22 devices with other Shure networked systems and software, see the following list of minimum versions:
- ULX-D ULXD4/4D/4Q Receivers 2.4.9
- Axient AXT600 Spectrum Manager 2.1.22
- PSM1000 P10T Transmitters 1.7.6
- Wireless Workbench 6.13.1
- Shure Update Utility 2.4.6
- ShurePlus Channels 1.4.2