Software & Firmware Archives

New Features

• Support for Dante Domain Manager
• Support for Dante Device Lock
• Support for AES67

Improvements

• For enhanced security, first-time user interface access will prompt the user to set up a passphrase. Users have the option of continuing without a passphrase, allowing for Shure Designer configuration software to securely configure the device within a location.
  • Passphrase length must be at least 8 characters up to a maximum of 64, all characters allowed
  • The passphrase may be disabled after the first login
  • Downgrade caution:
    • After the 4.1.37 upgrade, the device’s new passphrase (and/or its audio encryption passphrase) might exceed the allowed length of its prior firmware version. In that case, downgrading requires the following procedure to ensure passphrase compatibility:
      • Prior to downgrading, log in and disable the passphrase(s) or the change the passphrase(s) to the character length allowed by the prior firmware to be downgraded to.
      • Perform the firmware downgrade. Enable passphrase(s) as desired.
  • Using Designer software:
• When multiple devices at different firmware levels are put into a location using Shure Designer software, the location passphrase for those devices must abide by the length and character set limitations of the older firmware. Advice: Update all devices in the location to the latest firmware in order to use a more robust passphrase.

Bug Fixes

• Fixed an issue where there was the potential for a loss of audio after a power cycle when using Static IP setting.

Known Issues

• AES67 support is only available on UltimoX hardware
  • ANI4IN devices manufactured as of January 2018 are compatible with AES67
• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
• Shure Audio Encryption is not backwards compatible; all devices must be on version 4.1 firmware to use this feature

Notes

• User Guide
• Command Strings
• ANI4IN version 4.1.39 is compatible with ANI4IN devices running version 4.1.39 and below, but updating all devices used together to the same firmware version is recommended.
• To operate ANI4IN version 4.1.39 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate ANI4IN version 4.1.39 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI22 4.1.39
  • ANI4OUT 4.1.39
  • ANIUSB-MATRIX 4.1.39
  • MXA310 4.1.37
  • MXA910 4.1.41
  • Microflex Wireless 8.0.3
  • P300 4.1.11
  • ULXD4D/4Q 2.4.9
  • SCM820 1.3.3
  • Shure Update Utility 2.4.6
  • Shure Web Device Discovery 1.2.5

New Features

• Support for Dante Domain Manager
• Support for Dante Device Lock
• Support for AES67

Improvements

• For enhanced security, first-time user interface access will prompt the user to set up a passphrase. Users have the option of continuing without a passphrase, allowing for Shure Designer configuration software to securely configure the device within a location.
  • Passphrase length must be at least 8 characters up to a maximum of 64, all characters allowed
  • The passphrase may be disabled after the first login
  • Downgrade caution:
    • After the 4.1.37 upgrade, the device’s new passphrase (and/or its audio encryption passphrase) might exceed the allowed length of its prior firmware version. In that case, downgrading requires the following procedure to ensure passphrase compatibility:
      • Prior to downgrading, log in and disable the passphrase(s) or the change the passphrase(s) to the character length allowed by the prior firmware to be downgraded to.
      • Perform the firmware downgrade. Enable passphrase(s) as desired.
  • Using Designer software:
• When multiple devices at different firmware levels are put into a location using Shure Designer software, the location passphrase for those devices must abide by the length and character set limitations of the older firmware. Advice: Update all devices in the location to the latest firmware in order to use a more robust passphrase.

Bug Fixes

• Fixed an issue where there was the potential for a loss of audio after a power cycle when using Static IP setting.

Known Issues

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
• Shure Audio Encryption is not backwards compatible; all devices must be on version 4.1 firmware to use this feature

Notes

• User Guide
• Command Strings
• ANI22 version 4.1.39 is compatible with ANI22 devices running version 4.1.39 and below, but updating all devices used together to the same firmware version is recommended.
• To operate ANI22 version 4.1.39 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (macOS)
• To operate ANI22 version 4.1.39 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI4IN 4.1.39
  • ANI4OUT 4.1.39
  • ANIUSB-MATRIX 4.1.39
  • MXA310 4.1.37
  • MXA910 4.1.41
  • Microflex Wireless 8.0.3
  • ULXD4D/4Q 2.4.9
  • SCM820 1.3.3
  • Shure Update Utility 2.4.6
  • Shure Web Device Discovery 1.2.5

Improvement

• Updated support for the Z16 band

Notes

• User Guide
• Command Strings
• To operate AD4Q version 1.2.35 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 and ADX1/1M/2/2FD Transmitters 1.2.34
  • Axient Digital AD4D/Q Receivers 1.2.35
  • Axient AXT600 Spectrum Manager 2.1.22
  • SBRC Shure Battery Rack Charger 1.1.5
  • Shure Update Utility 2.4.6
  • ShurePlus Channels 1.4.2
  • Wireless Workbench 6.13.1

Improvement

• Updated support for the Z16 band

Notes

• User Guide
• Command Strings
• To operate AD4D version 1.2.35 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 and ADX1/1M/2/2FD Transmitters 1.2.34
  • Axient Digital AD4D/Q Receivers 1.2.35
  • Axient AXT600 Spectrum Manager 2.1.22
  • SBRC Shure Battery Rack Charger 1.1.5
  • Shure Update Utility 2.4.6
  • ShurePlus Channels 1.4.2
  • Wireless Workbench 6.13.1

Important

QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

• Support for new frequency bands:
  • Thailand 694 – 703 MHz frequency band (M19)
  • Thailand 748 – 758 MHz frequency band (Q12)
• Added the ability to view and edit the Gateway address via the front panel UI

Notes

• To operate QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on version 2.X firmware or later.
• To operate QLX-D version 2.3.22 devices with other Shure networked systems and software, see the following list of minimum versions:
  • ULX-D ULXD6/8 Transmitters 2.4.9
  • ULX-D ULXD4/4D/4Q Receivers 2.4.9
  • Axient AXT600 Spectrum Manager 2.1.22
  • PSM1000 P10T Transmitters 1.7.6
  • Wireless Workbench 6.13.1
  • Shure Update Utility 2.4.6
  • ShurePlus Channels 1.4.2

Important

QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

• Support for new frequency bands:
  • Thailand 694 – 703 MHz frequency band (M19)
  • Thailand 748 – 758 MHz frequency band (Q12)
• Added the ability to view and edit the Gateway address via the front panel UI

Notes

• To operate QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on version 2.X firmware or later.
• To operate QLX-D version 2.3.22 devices with other Shure networked systems and software, see the following list of minimum versions:
  • ULX-D ULXD6/8 Transmitters 2.4.9
  • ULX-D ULXD4/4D/4Q Receivers 2.4.9
  • Axient AXT600 Spectrum Manager 2.1.22
  • PSM1000 P10T Transmitters 1.7.6
  • Wireless Workbench 6.13.1
  • Shure Update Utility 2.4.6
  • ShurePlus Channels 1.4.2

Important

QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

• Support for new frequency bands:
  • Thailand 694 – 703 MHz frequency band (M19)
  • Thailand 748 – 758 MHz frequency band (Q12)
• Added the ability to view and edit the Gateway address via the front panel UI

Notes

• To operate QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on version 2.X firmware or later.
• To operate QLX-D version 2.3.22 devices with other Shure networked systems and software, see the following list of minimum versions:
  • ULX-D ULXD6/8 Transmitters 2.4.9
  • ULX-D ULXD4/4D/4Q Receivers 2.4.9
  • Axient AXT600 Spectrum Manager 2.1.22
  • PSM1000 P10T Transmitters 1.7.6
  • Wireless Workbench 6.13.1
  • Shure Update Utility 2.4.6
  • ShurePlus Channels 1.4.2

Important

QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

• Support for new frequency bands:
  • Thailand 694 – 703 MHz frequency band (M19)
  • Thailand 748 – 758 MHz frequency band (Q12)

Notes

• To operate QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on version 2.X firmware or later.
• To operate QLX-D version 2.3.22 devices with other Shure networked systems and software, see the following list of minimum versions:
  • ULX-D ULXD4/4D/4Q Receivers 2.4.9
  • Axient AXT600 Spectrum Manager 2.1.22
  • PSM1000 P10T Transmitters 1.7.6
  • Wireless Workbench 6.13.1
  • Shure Update Utility 2.4.6
  • ShurePlus Channels 1.4.2

Important

QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

• Support for new frequency bands:
  • Thailand 694 – 703 MHz frequency band (M19)
  • Thailand 748 – 758 MHz frequency band (Q12)

Notes

• To operate QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on version 2.X firmware or later.
• To operate QLX-D version 2.3.22 devices with other Shure networked systems and software, see the following list of minimum versions:
  • ULX-D ULXD4/4D/4Q Receivers 2.4.9
  • Axient AXT600 Spectrum Manager 2.1.22
  • PSM1000 P10T Transmitters 1.7.6
  • Wireless Workbench 6.13.1
  • Shure Update Utility 2.4.6
  • ShurePlus Channels 1.4.2

Important

QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

• Support for new frequency bands:
  • Thailand 694 – 703 MHz frequency band (M19)
  • Thailand 748 – 758 MHz frequency band (Q12)

Notes

• To operate QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on version 2.X firmware or later.
• To operate QLX-D version 2.3.22 devices with other Shure networked systems and software, see the following list of minimum versions:
  • ULX-D ULXD4/4D/4Q Receivers 2.4.9
  • Axient AXT600 Spectrum Manager 2.1.22
  • PSM1000 P10T Transmitters 1.7.6
  • Wireless Workbench 6.13.1
  • Shure Update Utility 2.4.6
  • ShurePlus Channels 1.4.2