Downloads
Software & Firmware Archives
Software
6.2.0
20/08/2024
Ver todas las Actualizaciones
Please Read Before Updating
- Prior to Installing IntelliMix Room 6.2, ensure your .NET version is 6.0. Other versions of .NET may prevent IntelliMix Room Installation.
- You can check your .NET version using the command dotnet --list-runtimes
- Download .NET version 6.0 here
- For more information, please see our FAQ page
Important
- To fully configure IntelliMix Room, download and install Shure Designer on a separate computer. Shure does not support installing Designer and IntelliMix Room on the same computer.
- IntelliMix Room 6.2 is compatible with Designer 6.2 only.
- When updating to IntelliMix Room 6.2 from previous versions, transmit audio routes from IntelliMix Room may fail to resolve. Please see this FAQ for more information.
- System API Standalone may have different functionality from the System API version installed with IntelliMix Room. For full System API functionality, please download the latest version of System API Standalone here.
Device Behavior Changes
- Installer prevents installation when System API Standalone is detected. To install IntelliMix Room, uninstall System API and run the IntelliMix Room installer again.
Improvements
- AI Deverb DSP Feature
- Bug fixes
- Resolved: IntelliMix Room 6.1 is not discoverable in Designer if PC Hostname contains unsupported Unicode characters.
- Resolved: IntelliMix Room fails to activate a license if PC Hostname contains unsupported Unicode characters.
Known Issues
- When Windows is configured in German, audio may not pass to Teams / Zoom after upgrading from IntelliMix Room 4.2 to 6.2.
- Workaround: uninstall and reinstall IntelliMix Room 6.2
- Changing the System Name of the host computer after installation of IntelliMix Room also changes the Dante Device name in Dante Controller. The Shure device name stays the same. Changing the Dante Device name can impact audio routes to Dante receive devices.
- Allowing a system running IntelliMix Room to enter a sleep state can cause issues with IntelliMix Room’s logic and mute synchronization functionality
- Workaround: restart your computer
- In some scenarios when using Dante Domain Manager with Shure devices, IntelliMix Room may appear as “Dante Locked” regardless of the device permissions set in Dante Domain Manager. In this state, IntelliMix Room networked audio settings cannot be customized.
- Workaround: unenroll and reenroll IntelliMix Room within Dante Domain Manager
Notes
Compatibility
- This version of IntelliMix Room is compatible with the following recommended software and firmware versions:
- Designer 6.2.0
- ANI22/ANI4IN/ANI4OUT 6.2.0
- ANIUSB-MATRIX 6.2.6
- MXA310 6.2.0
- MXA710 6.2.69
- MXA901-R 6.2.46
- MXA902 6.2.50
- MXA910 6.2.0
- MXA920 6.2.53
- MXA-MUTE 6.2.4
- MXN5-C 6.2.3
- Microflex Wireless 10.0.8
- P300 6.2.36
Firmware
6.2.0
20/08/2024
Ver todas las Actualizaciones
Known Issues
- Security Certificates:
- Certificates must be in the PEM (Privacy Enhanced Mail) format
- Certificates must be X.509 certificates and keys: PEM (Base64 ASCII), and DER (binary)
- The CUI may become unresponsive after a firmware update
- Workaround: Try clearing the cache on your browser to re-assert the connection. Please check your web browser for instructions on how to clear the browser cache. A common method of clearing the cache of a browser is Ctrl SHIFT R .
- Browser disconnection: Web browsers connected to our devices maybe disconnected after one hour if no user activity is detected. Refresh the browser to re-establish the connection.
- In AES67 mode - Audio does not pass after changing Dante Device name, followed by a reboot
- ANI22-XLR reverses absolute phase from Analog in to Dante out – workaround is to enable “Invert polarity” for Dante Output
- When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
Notes
- User Guide
- Command Strings
- To operate this version of ANI22 with Dante Controller, reference the following minimum versions:
- v3.10.2.4 (Windows)
- v3.10.2.3 (macOS)
- Updating all devices used together to the same firmware version is recommended.
- To operate this version of ANI22 with other Shure networked systems, reference the following list of recommended versions supported:
- ANI22/ANI4IN/ANI4OUT 6.2.0
- ANIUSB 6.2.6
- MXA310 6.2.0
- MXA901 6.2.46
- MXA902 6.2.50
- MXA910 6.2.0
- MXA920 6.2.53
- MXW 10.0.X
- ULXD4D/4Q 2.8.7
- SCM820 1.4.3
- Shure Update Utility 2.8.6
- Shure Web Device Discovery 1.2.17
Firmware
6.2.0
20/08/2024
Ver todas las Actualizaciones
Known Issues
- AES67 support is only available on UltimoX hardware
- ANI4IN/ANI4OUT devices manufactured as of January 2018 are compatible with AES67
- In AES67 mode - Audio does not pass after changing Dante Device name, followed by a reboot
- When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
Notes
Compatibility
- To operate this version of ANI4IN/ANI4OUT with Dante Controller, reference the following minimum versions:
- v3.10.2.4 (Windows)
- v3.10.2.3 (Mac OS X)
- Updating all devices used together to the same firmware version is recommended.
- To operate this version of ANI4IN/ANI4OUT with other Shure networked systems, reference the following list of recommended versions supported:
- ANI22/ANI4IN/ANI4OUT 6.2.0
- ANIUSB 6.2.6
- MXA310 6.2.0
- MXA901 6.2.46
- MXA902 6.2.50
- MXA910 6.2.0
- MXA920 6.2.53
- MXW 10.0.X
- P300 6.2.36
- ULXD4D/4Q 2.8.7
- SCM820 1.4.3
- Shure Update Utility 2.8.6
- Shure Web Device Discovery 1.2.17
Firmware
6.2.0
20/08/2024
Ver todas las Actualizaciones
Known Issues
- AES67 support is only available on UltimoX hardware
- ANI4IN/ANI4OUT devices manufactured as of January 2018 are compatible with AES67
- In AES67 mode - Audio does not pass after changing Dante Device name, followed by a reboot
- When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
Notes
Compatibility
- To operate this version of ANI4IN/ANI4OUT with Dante Controller, reference the following minimum versions:
- v3.10.2.4 (Windows)
- v3.10.2.3 (Mac OS X)
- Updating all devices used together to the same firmware version is recommended.
- To operate this version of ANI4IN/ANI4OUT with other Shure networked systems, reference the following list of recommended versions supported:
- ANI22/ANI4IN/ANI4OUT 6.2.0
- ANIUSB 6.2.6
- MXA310 6.2.0
- MXA901 6.2.46
- MXA902 6.2.50
- MXA910 6.2.0
- MXA920 6.2.53
- MXW 10.0.X
- P300 6.2.36
- ULXD4D/4Q 2.8.7
- SCM820 1.4.3
- Shure Update Utility 2.8.6
- Shure Web Device Discovery 1.2.17
Firmware
6.2.0
20/08/2024
Ver todas las Actualizaciones
Known Issues
- AES67 support is only available on UltimoX hardware
- ANI4IN/ANI4OUT devices manufactured as of January 2018 are compatible with AES67
- In AES67 mode - Audio does not pass after changing Dante Device name, followed by a reboot
- When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
Notes
Compatibility
- To operate this version of ANI4IN/ANI4OUT with Dante Controller, reference the following minimum versions:
- v3.10.2.4 (Windows)
- v3.10.2.3 (Mac OS X)
- Updating all devices used together to the same firmware version is recommended.
- To operate this version of ANI4IN/ANI4OUT with other Shure networked systems, reference the following list of recommended versions supported:
- ANI22/ANI4IN/ANI4OUT 6.2.0
- ANIUSB 6.2.6
- MXA310 6.2.0
- MXA901 6.2.46
- MXA902 6.2.50
- MXA910 6.2.0
- MXA920 6.2.53
- MXW 10.0.X
- P300 6.2.36
- ULXD4D/4Q 2.8.7
- SCM820 1.4.3
- Shure Update Utility 2.8.6
- Shure Web Device Discovery 1.2.17
Firmware
6.2.0
20/08/2024
Ver todas las Actualizaciones
Known Issues
- AES67 support is only available on UltimoX hardware
- ANI4IN/ANI4OUT devices manufactured as of January 2018 are compatible with AES67
- In AES67 mode - Audio does not pass after changing Dante Device name, followed by a reboot
- When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
Notes
Compatibility
- To operate this version of ANI4IN/ANI4OUT with Dante Controller, reference the following minimum versions:
- v3.10.2.4 (Windows)
- v3.10.2.3 (Mac OS X)
- Updating all devices used together to the same firmware version is recommended.
- To operate this version of ANI4IN/ANI4OUT with other Shure networked systems, reference the following list of recommended versions supported:
- ANI22/ANI4IN/ANI4OUT 6.2.0
- ANIUSB 6.2.6
- MXA310 6.2.0
- MXA901 6.2.46
- MXA902 6.2.50
- MXA910 6.2.0
- MXA920 6.2.53
- MXW 10.0.X
- P300 6.2.36
- ULXD4D/4Q 2.8.7
- SCM820 1.4.3
- Shure Update Utility 2.8.6
- Shure Web Device Discovery 1.2.17
Firmware
6.2.6
20/08/2024
Ver todas las Actualizaciones
Known Issues
- An 802.1X re-authorization request interrupts a firmware update and causes it to fail
- Workaround: restarting the update will resolve the problem
- Pop noise is triggered when the channel is unrouted in Dante controller with encryption enabled
- When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported.
- In AES67 mode - Audio does not pass after changing Dante Device name, followed by a reboot
Notes
Compatibility
- To operate this version of ANIUSB-MATRIX with Dante Controller, reference the following minimum versions
- v3.10.2.4 (Windows)
- v3.10.2.3 (macOS)
- To operate this version of ANIUSB-MATRIX with Microsoft Teams, reference the following minimum versions:
- Microsoft Teams Desktop: 1.3.00.24755
- Microsoft Teams Rooms: 4.6.20.0
- To operate this version of ANIUSB-MATRIX with Shure software or other Shure networked systems, reference the following list of recommended versions supported:
- Designer 6.2.0
- ANI22/ANI4IN/ANI4OUT 6.2.0
- MXA310 6.2.0
- MXA901 6.2.46
- MXA902 6.2.50
- MXA910 6.2.0
- MXA920 6.2.53
- MXW 10.0.X
- P300 6.2.36
- ULXD4D/4Q 2.8.7
- SCM820 1.4.3
- Shure Update Utility 2.8.6
- Shure Web Device Discovery 1.2.17
Firmware
6.2.0
20/08/2024
Ver todas las Actualizaciones
Known Issues
- An 802.1X re-authorization request interrupts a firmware update and causes it to fail
- Workaround: restarting the update will resolve the problem
- AES67 support is only available on UltimoX hardware
- MXA310 devices manufactured as of July 2017 are compatible with AES67
- In AES67 mode - Audio does not pass after changing Dante Device name, followed by a reboot
- When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
- The Mute Control Function command string response is incorrect when using <GET 0 ALL>
- When using < GET MUTE_CONTROL_FUNC >, the response is as documented.
- When using < GET 0 ALL >, the response should be mapped as follows:
| < GET 0 ALL > Response | Actual MUTE_CONTROL_FUNC |
| < REP MUTE_BUTTON ON > ... < REP MUTE_CONTROL_FUNC LOGIC > | LOCAL |
| < REP MUTE_BUTTON ON > ... < REP MUTE_CONTROL_FUNC LOCAL > | LOGIC |
| < REP MUTE_BUTTON OFF > | DISABLED |
Notes
- User Guide
- Command Strings
- To operate this version of MXA310 with Dante Controller, reference the following minimum versions:
- v3.10.2.4 (Windows)
- v3.10.2.3 (Mac OS X)
- Updating all devices used together to the same firmware version is recommended.
- To operate this version of MXA310 with Shure software or other Shure networked systems, reference the following list of recommended versions supported:
- Designer 6.2.0
- ANI22/ANI4IN/ANI4OUT 6.2.0
- ANIUSB 6.2.6
- MXA710 6.2.69
- MXA901 6.2.46
- MXA902 6.2.50
- MXA910 6.2.0
- MXA920 6.2.53
- MXA-MUTE 6.2.4
- MXN5-C 6.2.3
- MXW 10.0.X
- P300 6.2.36
- SCM820 1.4.3
- Shure Update Utility 2.8.6
- Shure Web Device Discovery 1.2.17
Firmware
6.2.0
20/08/2024
Ver todas las Actualizaciones
Known Issues
- An 802.1X re-authorization request interrupts a firmware update and causes it to fail
- Workaround: restarting the update will resolve the problem
- AES67 support is only available on UltimoX hardware
- MXA310 devices manufactured as of July 2017 are compatible with AES67
- In AES67 mode - Audio does not pass after changing Dante Device name, followed by a reboot
- When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
- The Mute Control Function command string response is incorrect when using <GET 0 ALL>
- When using < GET MUTE_CONTROL_FUNC >, the response is as documented.
- When using < GET 0 ALL >, the response should be mapped as follows:
| < GET 0 ALL > Response | Actual MUTE_CONTROL_FUNC |
| < REP MUTE_BUTTON ON > ... < REP MUTE_CONTROL_FUNC LOGIC > | LOCAL |
| < REP MUTE_BUTTON ON > ... < REP MUTE_CONTROL_FUNC LOCAL > | LOGIC |
| < REP MUTE_BUTTON OFF > | DISABLED |
Notes
- User Guide
- Command Strings
- To operate this version of MXA310 with Dante Controller, reference the following minimum versions:
- v3.10.2.4 (Windows)
- v3.10.2.3 (Mac OS X)
- Updating all devices used together to the same firmware version is recommended.
- To operate this version of MXA310 with Shure software or other Shure networked systems, reference the following list of recommended versions supported:
- Designer 6.2.0
- ANI22/ANI4IN/ANI4OUT 6.2.0
- ANIUSB 6.2.6
- MXA710 6.2.69
- MXA901 6.2.46
- MXA902 6.2.50
- MXA910 6.2.0
- MXA920 6.2.53
- MXA-MUTE 6.2.4
- MXN5-C 6.2.3
- MXW 10.0.X
- P300 6.2.36
- SCM820 1.4.3
- Shure Update Utility 2.8.6
- Shure Web Device Discovery 1.2.17
Firmware
6.2.69
20/08/2024
Ver todas las Actualizaciones
Improvements
- Introduced the following features:
- Speech Gating Threshold / Enhanced Noise Filtering
- Auto NLP
- Auto NR
- Ability to enter talker height in Designer, allowing for more accurate representation of coverage
- Updated the look of coverage in Designer
- Added ability to disable Autofocus
Notes
- User Guide
- Command Strings
- Learn more about connecting via web browser in our FAQ
Compatibility
- To operate this version of MXA710 with Dante Controller, reference the following minimum versions:
- v3.10.2.4 (Windows)
- v3.10.2.3 (Mac OS X)
- To operate this version of MXA710 with Shure software or other Shure networked systems, reference the following list of recommended versions supported:
- Designer 6.2.0
- ANI22/ANI4IN/ANI4OUT 6.2.0
- ANIUSB 6.2.6
- MXA310 6.2.0
- MXA901 6.2.46
- MXA902 6.2.50
- MXA910 6.2.0
- MXA920 6.2.53
- MXA-MUTE 6.2.4
- MXN5-C 6.2.3
- MXW 10.0.X
- P300 6.2.36
- ULXD4D/4Q 2.8.7
- SCM820 1.4.3
- Shure Update Utility 2.8.6
- Shure Web Device Discovery 1.2.17
Page 149 resultados
154