Software & Firmware Archives

Improvement

• Reduces the loading time over VPN for the web-based graphical user interface (GUI)

Known Issue

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

• User Guide
• Command Strings
• ANI4IN version 2.0.18 is compatible with ANI4IN devices running version 2.0.18 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate ANI4IN version 2.0.18 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate ANI4IN version 2.0.18 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI22 2.0.18
  • ANI4OUT 2.0.18
  • ANIUSB-MATRIX 2.0.19
  • MXA310 2.0.19
  • MXA910 2.0.19
  • Microflex Wireless 5.1.26
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.4.1
  • Shure Web Device Discovery 1.1

Improvement

• Reduces the loading time over VPN for the web-based graphical user interface (GUI)

Known Issue

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

• User Guide
• Command Strings
• ANI4IN version 2.0.18 is compatible with ANI4IN devices running version 2.0.18 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate ANI4IN version 2.0.18 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate ANI4IN version 2.0.18 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI22 2.0.18
  • ANI4OUT 2.0.18
  • ANIUSB-MATRIX 2.0.19
  • MXA310 2.0.19
  • MXA910 2.0.19
  • Microflex Wireless 5.1.26
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.4.1
  • Shure Web Device Discovery 1.1

Improvement

• Reduces the loading time over VPN for the web-based graphical user interface (GUI)

Known Issue

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

• User Guide
• Command Strings
• ANI4OUT version 2.0.18 is compatible with ANI4OUT devices running version 2.0.18 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate ANI4OUT version 2.0.18 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate ANI4OUT version 2.0.18 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI22 2.0.18
  • ANI4IN 2.0.18
  • ANIUSB-MATRIX 2.0.19
  • MXA310 2.0.19
  • MXA910 2.0.19
  • Microflex Wireless 5.1.26
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.4.1
  • Shure Web Device Discovery 1.1

Improvement

• Reduces the loading time over VPN for the web-based graphical user interface (GUI)

Known Issue

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

• User Guide
• Command Strings
• ANI4OUT version 2.0.18 is compatible with ANI4OUT devices running version 2.0.18 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate ANI4OUT version 2.0.18 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate ANI4OUT version 2.0.18 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI22 2.0.18
  • ANI4IN 2.0.18
  • ANIUSB-MATRIX 2.0.19
  • MXA310 2.0.19
  • MXA910 2.0.19
  • Microflex Wireless 5.1.26
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.4.1
  • Shure Web Device Discovery 1.1

Improvement

• Reduces the loading time over VPN for the web-based graphical user interface (GUI)

Known Issue

• TCPI set 0 for input level switch also incorrectly changes the output level switch and vice versa.
• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported.

Notes

• User Guide
• ANIUSB-MATRIX version 2.0.19 is compatible with ANIUSB-MATRIX devices running version 2.0.18 and below, but updating all devices used together to the same firmware version is recommended.
• To operate ANIUSB-MATRIX version 2.0.19 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate ANIUSB-MATRIX version 2.0.19 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI22 2.0.18
  • ANI4IN 2.0.18
  • ANI4OUT 2.0.18
  • MXA310 2.0.19
  • MXA910 2.0.19
  • Microflex Wireless 5.1.26
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.4.1
  • Shure Web Device Discovery 1.1

Improvement

• Reduces the loading time over VPN for the web-based graphical user interface (GUI)

Known Issues

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
• If Channel 1 is removed using the Add/Remove Channel feature and Channel 2, 3, or 4 is left as a single channel, then audio will not pass through the Automix Out channel. Channel 1 is the only channel that passes audio through the Automix Out channel.

Notes

• User Guide
• Command Strings
• MXA310 version 2.0.19 is compatible with MXA310 devices running version 2.0.19 and below, but updating all devices used together to the same firmware version is recommended.
• To operate MXA310 version 2.0.19 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate MXA310 version 2.0.19 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI22 2.0.18
  • ANI4IN 2.0.18
  • ANI4OUT 2.0.18
  • ANIUSB-MATRIX 2.0.19
  • MXA910 2.0.19
  • Microflex Wireless 5.1.26
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.4.1
  • Shure Web Device Discovery 1.1

Improvement

• Reduces the loading time over VPN for the web-based graphical user interface (GUI)

Known Issues

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported
• If Channel 1 is removed using the Add/Remove Channel feature and Channel 2, 3, or 4 is left as a single channel, then audio will not pass through the Automix Out channel. Channel 1 is the only channel that passes audio through the Automix Out channel.

Notes

• User Guide
• Command Strings
• MXA310 version 2.0.19 is compatible with MXA310 devices running version 2.0.19 and below, but updating all devices used together to the same firmware version is recommended.
• To operate MXA310 version 2.0.19 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate MXA310 version 2.0.19 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI22 2.0.18
  • ANI4IN 2.0.18
  • ANI4OUT 2.0.18
  • ANIUSB-MATRIX 2.0.19
  • MXA910 2.0.19
  • Microflex Wireless 5.1.26
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.4.1
  • Shure Web Device Discovery 1.1

Recommendation

Update all MXA910 devices in a configuration to the same firmware version.

Improvement

• Reduces the loading time over VPN for the web-based graphical user interface (GUI)

Known Issue

• When exporting Presets using Safari on a Mac OS, the file type is saved incorrectly and must be renamed to .json to be imported

Notes

• User Guide
• Command Strings
• MXA910 version 2.0.19 is compatible with MXA910 devices running version 2.0.19 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate MXA910 version 2.0.19 with Dante™ Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate MXA910 version 2.0.19 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI22 2.0.18
  • ANI4IN 2.0.18
  • ANI4OUT 2.0.18
  • ANIUSB-MATRIX 2.0.19
  • Designer 3.0
  • MXA310 2.0.19
  • Microflex Wireless 5.1.26
  • ULXD4D/4Q 2.1.16
  • SCM820 1.3.3
  • Shure Update Utility 2.4.1
  • Shure Web Device Discovery 1.1

*****
UPDATE: February 28, 2019: SystemOn 3.0.1 does not support ULX-D devices on version 2.3.21. These devices will be supported in an upcoming version.

UPDATE: November 7, 2018: SystemOn 3.0.1 supports ULX-D devices updated to version 2.3.4, but does not support new hardware revisions of ULX-D on version 2.3.4.

*****

KNOWN ISSUE

SystemOn 3.0.1 incorrectly warns "Check system requirements, your current firmware version may not be confirmed compatible" for firmware versions that it does not support.

To operate SystemOn 3.0.1 with Shure networked systems, see the following list of supported firmware versions:

• SCM810 1.3.3
• ULX-D 1.7.34 - 2.3.4
  • ULX-D J50A or L50A frequency bands are not supported
  • ULX-D new hardware revisions are not supported
• MXW 4.0.6 – 6.0.3

UPDATE: October 30, 2018: SystemOn 3.0.1 supports MXW version 6.0.3; however, it will incorrectly warn “Check system requirements, your current firmware version may not be confirmed compatible.”

To operate SystemOn 3.0.1 with Shure networked systems, see the following list of supported firmware versions:

• SCM820 1.3.3
• ULX-D 1.7.34 - 2.2.24
  • ULX-D J50A or L50A frequency bands are not supported
• MXW 4.0.6 – 6.0.3

UPDATE: June 20, 2018: SystemOn will notify users that ULX-D 2.2.24 may not be compatible; however only ULX-D devices on J50A or L50A frequency bands are not compatible with SystemOn 2.0-3.0.1.

UPDATE: June 13, 2018:

• SystemOn 3.0.1 supports MXW 5.2.2. However, SystemOn will incorrectly warn “Check system requirements, your current firmware version may not be confirmed compatible.” Please disregard this warning.
• MXW 5.2.2 fixes a previous issue where MXW microphones could take more than one minute to be discovered.
• The improvement made to SystemOn 3.0.1, where the time to report missing devices was increased to 3-4 minutes, may remain 1 minute.

*****

Release Date: 12/18/2017

Improvements

• Compatibility with MXW version 5.1.26
• The time before reporting missing devices has been increased to 3-4 minutes to reduce false notifications

Known Issues

• Discovering MXW microphones may take more than 1 minute
• ULX-D Users may receive duplicate SMS notifications
• Metering quality for a single location with greater than 32 devices
• UTC time and date are displayed on Event Log and Email/SMS notifications.
• Navigating through an Event Log with hundreds of events may be slow or could cause the system to time out.
• For non-English users setting up SMS notifications, the Senders Phone Number field doesn’t show the required (*), but the field is required.
• If a valid license activation ID is applied and fails on the first attempt, retry a second time before calling support.

Notes

• To operate SystemOn 3.0.1 with Shure networked systems, see the following list of supported firmware versions:
  • SCM820 1.3.3
  • ULX-D 1.7.34 - 2.1.16
  • MXW 4.0.6 - 5.1.26
• Please report SystemOn performance issues on any browser to Shure Support.
• For help and troubleshooting, go to the SystemOn User Guide or FAQs

Upgrades and Licenses

• This version is used to upgrade from all previous SW6000 versions, however it cannot be used to upgrade systems using CU 6005, CU 6010 or CU 6011 Central Units
• This version is compatible with SW6000 Software License file v1.7 only
• No new SW6000 license is needed if upgrading from SW6000 v6.0.xxx or later versions
• A new SW6000 license is needed if upgrading from SW6000 v5.8.xxx or previous versions

New Features

CAA

• Agenda item durations added - meeting start time used for agenda item start time
• Added Email field to Participants table
• Vote results tab in Agenda is now available if license SW6000-VOTE is available – dependency is removed from license SW6000-ADV

CUA

• Agenda screen displays start time for agenda items (CUA config dependent)
• Added Agenda Time extension control – enabling ‘Auto Update’ feature - Agenda item start time and start time for subsequent agenda items is updated when the subject is set active first time
• Manual Entered Vote results now support 'Unanimous' voting

Beta support for Pre-request to Speak

• Those features require that two dll's are copied to the "Conference Administrator Application\ImportExport" folder (Newtonsoft.Json.dll WebMeetingIntegration.dll).

CAA

• Agenda – support for pre-meeting speak requests for agenda items

CUA

• Agenda – setting an agenda item active populates the pre-meeting request list for the agenda item

Beta support for MXC products

CAA

• Support for ACR1281U-C1 Dual programmer (programs dual interface cards with NFC/Chip interface and CC 6010 cards with Chip interface)
• Support for ACR1252U-M1 (programs dual interface cards with NFC/Chip interface)

CUI

• Beta support for MXC615/MXC620/MXC630 units

Bug Fixes

This section lists the major bugs, where corrections have been made.

Installer

• Fixed a Customer Reported database upgrade error – Collation error

CUA

• Fixed an error
  • where the Microphone speak button state could get out of sync if a replace unit was done including an open microphone unit
  • where scrolling up/down in a large agenda can end up where the line separating the subjects is not being displayed
  • where using the CAA to change speak priority for a meeting role with no active meeting
  • can cause a CUA exception – displayed in system messages
  • where the Last 5 speakers list should be cleared on conference start/stop
  • where the Group speech time is not updated correctly after pause and resume of a meeting
  • where the Total Seat value displayed can be incorrect. Number of seats in seat table used by a meeting is displayed – technician seat types should be excluded in count
  • where the text color for result values is hardcoded – should be configurable
  • when using the mimic to log in a user, the suggested roles for a selected participant is taken from the participant table – should be taken from participant seat table if a table is used for the meeting. Login pop-up should be centred on mimic – placed on top of CUA if mimic is moved to secondary screen
  • where the name displayed for a participant does not reflect the meeting role if the participant is logged in using a different meeting role from the mimic
  • for a meeting with a participant list, where a participant that’s logged out from the mimic is not added to the ‘Participants not present’ list
  • where a participant in the Microphones Control -> Participant List -> Participant Info is displayed with incorrect show name if the participant has been logged in with a Participant Role other than the default for the participant. Resolution is to only show participant name in Participant Info
  • where a participant in the Microphones Control -> Participant List logged in with no speaking rights are not displayed in this. Same problem when no conference is active for microphone units with no speaking right assigned

CAA

• Fixed an error
  • where deleting all CDA displays can make it impossible to add a new CDA display
  • in the Conference Log report, where the report does not show speaker stop time, if speaker was active at meeting stop
  • where the subject title in Agenda Master/Detail view of agenda is not in sync
  • allowing the user to enter special characters in search field in Labels screen
  • in various screens with filter functionality – [Delete] button must be disabled when the search has no results
  • in Meeting Displays (CDA) where filtering and adding a new CDA display, while filter has no results, can result in a blank entry when filter is removed
  • in Meeting Displays (CDA) where the Update button is not enabled when changing values for numeric controls – e.g. instance
  • in various screens with filter functionality – Support using special characters in filter)
  • in various labels e.g. Delegate (User Type) is changed to Participants (Meeting Role) in speech time configuration
  • where a meeting re-import should not overwrite a stop date configured as future date
  • making the filter to correctly filter on start/stop date of meetings
  • in the Subject Vote Report, where Group sorting must be taken into account
  • in the Conference Units window, where clicking Add Unit after doing a microphone scan results in an error
  • in the Participant Table Window, where using the button [Generate] for the field Login Code, correctly generates a new login code, but entry is not marked as updated and the [Update] and [Cancel] buttons are not enabled

Notes

SW6000 and DCS 6000 Compatibility Chart