Software & Firmware Archives

Initial Release

Notes

• User guide
• To operate SLX-D version 1.0.5 devices with other Shure networked systems, see the following list of supported minimum versions:
  • Wireless Workbench 6.13.3 (virtual device and coordination only)
  • Shure Update Utility 2.4.8

Initial Release

Notes

• User guide
• To operate SLX-D version 1.0.5 devices with other Shure networked systems, see the following list of supported minimum versions:
  • Wireless Workbench 6.13.3 (virtual device and coordination only)
  • Shure Update Utility 2.4.8

Release notes cover the following models:

• MXC605
• MXC605-F
• MXC615
• MXC620/620-F
• MXC630/630-F
• MXC640
• MXCIC
• MXCMIU
• MXCSIGN
• DIS-CCU
• DC5900F
• DC5980P

Important

• This firmware release can be used to update Microflex Complete (MXC) or DCS 6000 systems using DIS-CCU Central Unit and to update DC5900F and DC5980P to register and work in an MXC system.
• Systems using CU 5905, CU 6000, CU 6005, CU 6010, CU 6011, CU 6105, or CU 6110 Central Units are not supported in this release.
• The Firmware Update Utility (FUU) included in this release, is required to make the update.

New Features

• DIS-CCU  
  • MXC605 support – as delegate, chairman, ambient and interpreter
  • MXC605-F support – as delegate, chairman and ambient
  • DC5980P support for use in MXC system – as delegate, chairman and interpreter
    • Meeting role (Delegate/Chairman) is set in DIS-CCU  -  change "on-the-fly"
    • Left button is configured in DIS-CCU
      • Delegate: No function or Mute
      • Chairman: No function or All delegates off
  • DC5900F support for use in MXC system – as delegate and chairman
    • Meeting role (Delegate/Chairman) is set in DIS-CCU  -  change "on-the-fly"
  • Auto registration/selection of MXC VOX mode vs 6000 VOX mode. If 5900/6000 units are present, voice activation mode will be 6000 VOX mode, otherwise it will be MXC VOX mode
  • Comply with California’s IoT Law
  • Global and UI language options expanded with Catalan and Basque
  • System change option between 5900 and 6000 mode removed
  • FL6000 license included as default
• MXC Conference Units
  • Support for Speak button “Delegate speak button lock”
  • Support for Speak button "Press and hold"
  • UI language options expanded with Catalan and Basque
• MXCIC
  • Option to show agenda
  • Option to enable/disable the audio beeps for hearing protection
  • Mic LED button behavior to indicate selected outgoing channels status
• TCPI
  • 'mic_mute_all’ command included

Bug Fixes

• MXC Conference units
  • MXC VOX mode: Pressing Mute should prevent gating on own MIC
• MXC630-F 
  • Wrong indication in 'Abstain' button
• MXC640
  • Fixed LED control when a dual unit is both in speak list and request list
  • Present/seats value = 2000 was cut off on right side, and only 200 was shown
  • Home screen and FW upgrade screen images are changed
• MXCMIU
  • Individual microphone Level was not persistent across unit and CCU reset
• MXCIC 
  • Long participant names were not updating on Speakers page
• TPCI 
  • Individual vote state was missing a space char before button_id
  • Mic_speech_time_alarm repeats multiple times for alarm for each unit
  • Mix-minus state info was not correct
• Legacy 6000 units
  • VOX settings not kept after reboot

Known Issues

• MXC640
  • Manually entered voting results are not shown if a normal voting session has not been started first
  • The agenda subject name for a manually entered result may be wrong
  • It is not possible to use an MXC640 configured as dual delegate with SW6000 if the use of NFC cards is enabled

Notes

• MXC and DCS 6000 firmware files are packaged together in the same release file.
• To operate MXC devices using version 9.0 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SW6000 v9.0
  • Shure NFC Programming App 1.0.3

Important

• This software version is used for new SW6000 installations or to update all previous SW6000 installed versions using DIS-CCU Central Unit (CU 6005, CU 6010, CU 6011. CU 6105, CU 6110 and CU 5905 is not supported)
• This version is compatible with SW6000 Software License file v1.7 only
• No new SW6000 license is needed if updating from SW6000 v6.0.xxx or later versions
• A new SW6000 license is needed if updating from SW6000 v5.8.xxx or previous versions

New Features

• General
  • MXC605 support – as delegate, chairman, ambient and interpreter
  • MXC605-F support – as delegate, chairman and ambient
  • DC5980P support for use in MXC system – as delegate, chairman and interpreter
  • DC5900F support for use in MXC system – as delegate and chairman
  • Support for additional diagnostics messages from CCU -> CAA/CUA
• CAA
  • Support added for NFC fields used in standalone systems
  • Support of extended audio range for MXCMIU units when using XLR input
  • Support for removing entries in the device table, which has changed unit type. When a device (like MXCMIU, MXC605, MXC615, MXC620, MXC640, DC5980P), which can change unit type,  connects to SW6000 with a new unit type compared to the unit type registered in SW6000, the entry with the 'old' unit type is removed. The unit will be registered with the new unit type, making it unnecessary for a user to remove the entry before connecting the CUI in order to get the unit to work with the new unit type.
• CUI
  • Serial port communication to legacy CU’s removed, no longer in use.
• TPCI
  • Participant names are now always available. Previously, the names were only available if MXC640 units were present.

Bug Fixes

• CUA
  • For conference mode ‘automatic login on preferred seat’ with a CUA paired to a device, but PC not online, it was possible to vote from the paired device, but voting session was subsequently cancelled with no result
  • In the Interpretation control, it was possible to select 0-floor for outgoing language for MXCIC, which is incorrect.
  • If a CUA is registered with no paired conference unit and subsequently replaced with a unit with a conference unit, the unit will not be assigned speaking rights.
  • Changing displayed agenda subject on CUA agenda control hides ‘hyperlink’ pane.
  • Replacing a conference unit during a meeting will cause CUA microphone on/off feature for the replaced unit to not work.
  • If user performs CUA logout in ‘prepared participant seat table' mode, voting rights are removed from the paired device
  • Reply button may display incorrect position in reply queue.
  • The displayed ‘total logged in’ count was incorrect if a CUA logs in after CUI has lost connection to the CCU.
  • Total logged in count is not displayed on the main screen for meeting mode ‘login using code on preferred seat’.
  • Using the mimic [All requests off] button while request list is hidden, causes microphones from the list to be switched on.
  • Participant logged in using CUA with no paired conference unit will not be displayed on a technician participant list if technician logs in after the participant logs in.
• CAA
  • Adding empty entries to a participant list for a meeting with meeting mode ‘login using code on list’ causes exception.
  • Exporting participants table to XML can create an exception under specific circumstances.
  • Exporting a meeting with meeting mode ‘prepared participant seat table’ that has empty seats in the seat table, causes a failure.
  • Importing agenda from XML may cause incomplete import error if participants from the import are not present in the database.
  • The duration in conference log reports for ‘no subject’ was wrongly the duration of the entire meeting.
  • The ‘delete all’ option in ‘Setup|Equipment|Conference unit’ with some units being online (which cannot be deleted), does initiate a warning, but offline units are subsequently not deleted.
  • Manually creating entries for devices and typing in the serial number fails if serial numbers are entered without prefixed 0’s (e.g. 12 instead of 012).
  • It was possible to add hyperlinks to an active agenda item, which shall not be possible.
• CUI
  • Webservice updates for multi-language meetings sends agenda details in all languages to endpoint.  It should only send in selected languages.
  • Creating a shortcut fails, if the shortcut has a space in the name.
  • A voting session requested from a MXC640 (hardware) shall be rejected if the voting configuration requires mandatory login on a specific seat and login has not been executed.
  • Restarting or resuming a meeting does not reopen an active agenda subject from last stop/pause.

Known Issues

• None

Notes

• To operate MXC devices with SW6000 version 9.0, see the following list of minimum software and firmware versions:
  • MXC firmware release 9.0

Improvements

• Bug fixes
• Android 10 compatibility

Notes

• User Guide
• MV88+ User Guide
• Compatible with Android 8.0 and higher.
• NOTE FOR MV88+ USERS: Learn about compatibility with your Android device at www.shure.com/MOTIVcompatibility.

These release notes cover the following models:

• MXWNCS2/4/8 Networked Charging Stations
• MXWANI4/8 Audio Network Interfaces
• MXWAPT2/4/8 Access Point Transceivers
• MXW1/2/6/8 Wireless Microphones

Related Links

• Crestron/AMX Control Strings
• Quick Start Guide
• User Guide

Improvements

• DDM Support: This release will add support for Audinate’s Dante Domain Manager (DDM) to the MXWAPT2/4/8. Please see updated user manuals for details on operating MXWAPTs within DDM controlled audio networks. Notes:
  1. This release will NOT add support for DDM to the MXWANI4/8.
  2. If Dante Pin Lock is enabled within the DDM interface, local changes to the APT (via the web based MXW user interface or “Web-GUI”) will not be permitted
  3. If Dante Pin Lock is enabled the Device Reset Button on the APT will be disabled
• Improvements of spectrum-scan algorithm: Spectrum Scans (across all DECT RF-Bands, including J-DECT, UPCS etc.) carried out on a locally installed APT via the Web-GUI will now result in a more accurate statement of how many microphone channels are available in the scanned location.
• Security Improvement: Before an MXW device is permitted to carry out a factory-reset, the administrator password needs to be entered into the user interface.

Bug Fixes

• APT Web-GUI: Microphones with older firmware are not shown in the web-GUI - FIXED

Known Issue

• Multiple Grand Master Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
• Repetitive opening and closing of the TPCI port (2202), in excess of 250K cycles, causes TPCI port to no longer respond.

Notes

• To operate MXW version 9.0.4 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SCM820 1.3.3
  • Shure Web Device Discovery 1.2.9
  • Shure Update Utility 2.4.8
  • SystemOn 3.2

These release notes cover the following models:

• MXWNCS2/4/8 Networked Charging Stations
• MXWANI4/8 Audio Network Interfaces
• MXWAPT2/4/8 Access Point Transceivers
• MXW1/2/6/8 Wireless Microphones

Related Links

• Crestron/AMX Control Strings
• Quick Start Guide
• User Guide

Improvements

• DDM Support: This release will add support for Audinate’s Dante Domain Manager (DDM) to the MXWAPT2/4/8. Please see updated user manuals for details on operating MXWAPTs within DDM controlled audio networks. Notes:
  1. This release will NOT add support for DDM to the MXWANI4/8.
  2. If Dante Pin Lock is enabled within the DDM interface, local changes to the APT (via the web based MXW user interface or “Web-GUI”) will not be permitted
  3. If Dante Pin Lock is enabled the Device Reset Button on the APT will be disabled
• Improvements of spectrum-scan algorithm: Spectrum Scans (across all DECT RF-Bands, including J-DECT, UPCS etc.) carried out on a locally installed APT via the Web-GUI will now result in a more accurate statement of how many microphone channels are available in the scanned location.
• Security Improvement: Before an MXW device is permitted to carry out a factory-reset, the administrator password needs to be entered into the user interface.

Bug Fixes

• APT Web-GUI: Microphones with older firmware are not shown in the web-GUI - FIXED

Known Issue

• Multiple Grand Master Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
• Repetitive opening and closing of the TPCI port (2202), in excess of 250K cycles, causes TPCI port to no longer respond.

Notes

• To operate MXW version 9.0.4 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SCM820 1.3.3
  • Shure Web Device Discovery 1.2.9
  • Shure Update Utility 2.4.8
  • SystemOn 3.2

These release notes cover the following models:

• MXWNCS2/4/8 Networked Charging Stations
• MXWANI4/8 Audio Network Interfaces
• MXWAPT2/4/8 Access Point Transceivers
• MXW1/2/6/8 Wireless Microphones

Related Links

• Crestron/AMX Control Strings
• Quick Start Guide
• User Guide

Improvements

• DDM Support: This release will add support for Audinate’s Dante Domain Manager (DDM) to the MXWAPT2/4/8. Please see updated user manuals for details on operating MXWAPTs within DDM controlled audio networks. Notes:
  1. This release will NOT add support for DDM to the MXWANI4/8.
  2. If Dante Pin Lock is enabled within the DDM interface, local changes to the APT (via the web based MXW user interface or “Web-GUI”) will not be permitted
  3. If Dante Pin Lock is enabled the Device Reset Button on the APT will be disabled
• Improvements of spectrum-scan algorithm: Spectrum Scans (across all DECT RF-Bands, including J-DECT, UPCS etc.) carried out on a locally installed APT via the Web-GUI will now result in a more accurate statement of how many microphone channels are available in the scanned location.
• Security Improvement: Before an MXW device is permitted to carry out a factory-reset, the administrator password needs to be entered into the user interface.

Bug Fixes

• APT Web-GUI: Microphones with older firmware are not shown in the web-GUI - FIXED

Known Issue

• Multiple Grand Master Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
• Repetitive opening and closing of the TPCI port (2202), in excess of 250K cycles, causes TPCI port to no longer respond.

Notes

• To operate MXW version 9.0.4 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SCM820 1.3.3
  • Shure Web Device Discovery 1.2.9
  • Shure Update Utility 2.4.8
  • SystemOn 3.2

These release notes cover the following models:

• MXWNCS2/4/8 Networked Charging Stations
• MXWANI4/8 Audio Network Interfaces
• MXWAPT2/4/8 Access Point Transceivers
• MXW1/2/6/8 Wireless Microphones

Related Links

• Crestron/AMX Control Strings
• Quick Start Guide
• User Guide

Improvements

• DDM Support: This release will add support for Audinate’s Dante Domain Manager (DDM) to the MXWAPT2/4/8. Please see updated user manuals for details on operating MXWAPTs within DDM controlled audio networks. Notes:
  1. This release will NOT add support for DDM to the MXWANI4/8.
  2. If Dante Pin Lock is enabled within the DDM interface, local changes to the APT (via the web based MXW user interface or “Web-GUI”) will not be permitted
  3. If Dante Pin Lock is enabled the Device Reset Button on the APT will be disabled
• Improvements of spectrum-scan algorithm: Spectrum Scans (across all DECT RF-Bands, including J-DECT, UPCS etc.) carried out on a locally installed APT via the Web-GUI will now result in a more accurate statement of how many microphone channels are available in the scanned location.
• Security Improvement: Before an MXW device is permitted to carry out a factory-reset, the administrator password needs to be entered into the user interface.

Bug Fixes

• APT Web-GUI: Microphones with older firmware are not shown in the web-GUI - FIXED

Known Issue

• Multiple Grand Master Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
• Repetitive opening and closing of the TPCI port (2202), in excess of 250K cycles, causes TPCI port to no longer respond.

Notes

• To operate MXW version 9.0.4 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SCM820 1.3.3
  • Shure Web Device Discovery 1.2.9
  • Shure Update Utility 2.4.8
  • SystemOn 3.2

These release notes cover the following models:

• MXWNCS2/4/8 Networked Charging Stations
• MXWANI4/8 Audio Network Interfaces
• MXWAPT2/4/8 Access Point Transceivers
• MXW1/2/6/8 Wireless Microphones

Related Links

• Crestron/AMX Control Strings
• Quick Start Guide
• User Guide

Improvements

• DDM Support: This release will add support for Audinate’s Dante Domain Manager (DDM) to the MXWAPT2/4/8. Please see updated user manuals for details on operating MXWAPTs within DDM controlled audio networks. Notes:
  1. This release will NOT add support for DDM to the MXWANI4/8.
  2. If Dante Pin Lock is enabled within the DDM interface, local changes to the APT (via the web based MXW user interface or “Web-GUI”) will not be permitted
  3. If Dante Pin Lock is enabled the Device Reset Button on the APT will be disabled
• Improvements of spectrum-scan algorithm: Spectrum Scans (across all DECT RF-Bands, including J-DECT, UPCS etc.) carried out on a locally installed APT via the Web-GUI will now result in a more accurate statement of how many microphone channels are available in the scanned location.
• Security Improvement: Before an MXW device is permitted to carry out a factory-reset, the administrator password needs to be entered into the user interface.

Bug Fixes

• APT Web-GUI: Microphones with older firmware are not shown in the web-GUI - FIXED

Known Issue

• Multiple Grand Master Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
• Repetitive opening and closing of the TPCI port (2202), in excess of 250K cycles, causes TPCI port to no longer respond.

Notes

• To operate MXW version 9.0.4 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SCM820 1.3.3
  • Shure Web Device Discovery 1.2.9
  • Shure Update Utility 2.4.8
  • SystemOn 3.2