सॉफ्टवेयर और फर्मवेयर अभिलेखागार

These release notes cover the following models: 

• MXWAPT2/4/8 Access Point Transceivers

Important

• Update any MXW devices which are below the minimum supported firmware 8.0.3 by using the Shure Update Utility (SUU) found here.  Please note – should the firmware version used be older than 5.2.2, it is advised to upgrade to version 5.2.2 first before updating to any subsequent more recent releases. Close the SUU when complete.

Improvements

• Security enhancement - removal of basic network setup web-based user interface. Microflex Wireless Application should be used to configure the device's network settings.
• DHCP option 61 support - support for DHCP servers that make IP address offers that have option 61 defined.

Known Issues

• Multiple Primary Leader Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet

Notes

• User Guide
• Quick Start Guide
• Command Strings

Compatibility

• To operate this version of MXW with other Shure networked systems, see the following list of recommended software and firmware versions:
  • SCM820 1.4.3
  • Shure Web Device Discovery 1.2.17
  • Shure Update Utility 2.8.6

Improvements

• ShurePlus Channels now uses the same Analytics platform as other Shure applications. Analytics allow us to inform app improvements based on your interactions with the app. Analytics are always Optional and contain information about which features you use and what Shure hardware you connect to.

Bug Fixes

• Fixed an issue when in some cases using an iPad, the app crashed after being idle for over 15 minutes

Known Issues 

• The transmitter count on the Transmitters tab is not updated dynamically in channels details view on AXT400 devices
  • Workaround: The transmitter count in the on-screen navigation is updated
• ADX5D takes a few seconds longer to discover than other networked Shure devices

Notes 

• User Guide 
• Please report problems and submit general feedback through the app
  • Settings > Help > Send Feedback
• For the best results, ensure your connected devices are updated to the latest firmware using the Shure Update Utility desktop app. 
• We recommend using devices and WiFi access points that support WiFi 6 or later.
• In order to view the SSID of your network connection type or SSID in the network status bar, you must permit the app access to your location. To do so, go to the Settings app on your iPhone or tablet, select Privacy > Location Services > Channels, and choose “While Using the App”. 

Compatibility

• Compatible with iPhone, iPad, and iPod touch devices running iOS 15 or later. We can’t ensure compatibility or full-feature functionality with older operating systems.
• To operate this version of ShurePlus Channels with other Shure products, reference the following list of recommended versions: 
  • Axient Digital 1.4.15 
  • AD600 1.0.39
  • Axient 2.1.41
  • PSM1000 1.8.6
  • QLX-D 2.6.2
  • SLX-D 1.4.4
  • UHF-R 1.171
  • ULX-D 2.8.7
  • SBC220/240 Two-bay Chargers 1.4.19
  • SBC250/450/850 Networked Charging Stations 2.8.6
  • SBRC Shure Battery Rack Charger 1.1.6
  • Shure Update Utility 2.8.6
  • Wireless Workbench 6.15.4 or 7.2.0

Improvements

• Backend updates

Notes

• User Guide
• To operate this version of SLX-D with other Shure networked systems, see the following list of recommended versions:
  • Wireless Workbench 6.15.4 or 7.2.0
  • Shure Update Utility 2.8.6

Improvements

• Backend updates

Notes

• User Guide
• To operate this version of SLX-D with other Shure networked systems, see the following list of recommended versions:
  • Wireless Workbench 6.15.4 or 7.2.0
  • Shure Update Utility 2.8.6

Improvements

• General improvements

Notes

• User Guide
• Please report problems and submit general feedback in the app settings page

Compatibility

• This app is compatible with Android 12 or later. We can’t ensure compatibility or full-feature functionality with older operating systems.

Improvements

• This release requires Shure MoveMic Receiver (MV-R) users to update to the latest firmware for iOS 18 compatibility
• Bug fixes

Known Issues

• The FPS and resolution combinations available for selection will vary based on the user’s phone.
• Intermittent issue on USB-C iOS devices where MV6 microphone is undiscovered after locking the phone for several minutes

Notes

• User Guides
  • MOTIV Video
  • MoveMic
  • MV7+
  • MV7
  • MV6
  • MV88+
  • MV88
• Frequently Asked Questions
• Please report problems and submit general feedback through the app (About > Feedback)

Compatibility

• This app is compatible with iOS 16 or later. We can’t ensure compatibility or full-feature functionality with older operating systems.
• Compatible with iPhone, iPad, and Apple Watch

Improvements

• General improvements

Known Issues

• The FPS and resolution combinations available for selection will vary based on the user’s phone.

Notes

• User Guides
  • MOTIV Video
  • MoveMic
  • MV7+
  • MV7
  • MV6
  • MV88+
• Frequently Asked Questions
• Please report problems and submit general feedback through the app (About > Feedback)

Compatibility

• This app is compatible with Android 12 or later. We can’t ensure compatibility or full-feature functionality with older operating systems.

Improvements

• Teams Mute Sync support

Notes

• User Guide
• Firmware updates for MV7+ are available in the MOTIV Mix desktop application, as well as the MOTIV mobile apps

Compatibility

• MV7+ is compatible with the following software:
  • MOTIV Mix
  • MOTIV Audio (iOS & Android)
  • MOTIV Video (iOS & Android)
• We always recommend updating to the latest software and firmware versions for the best user experience.

Improvements

• Zero-based gain range

Notes

• User Guide
• Firmware updates for MVX2U are available in the MOTIV Mix desktop application

Compatibility

• MVX2U is compatible with the following software:
  • MOTIV Mix
  • MOTIV Desktop Application
• We always recommend updating to the latest software and firmware versions for the best user experience.

Improvements

• ShurePlus Channels now uses the same Analytics platform as other Shure applications. Analytics allow us to inform app improvements based on your interactions with the app. Analytics are always optional and contain information about which features you use and what Shure hardware you connect to.

Known Issues

• ADX5D may take several seconds longer to discover than other networked Shure devices
• In certain cases using Quadversity mode on AD4Q, the "New Frequency" option is not displayed dynamically on the Frequency picker 
  • Workaround: Refresh or close and relaunch the application
• In certain cases when identifying multiple channels or devices, Inventory items may not load completely, and users may be unable to navigate to the detailed view
• When using ULXD4Q in audio summing mode, audio LEDs in the application do not match the hardware’s front panel during audio overload
• Axient and Axient Digital devices managed by an AXT600 with no new frequencies available will show an enabled “New Frequency” button when the button should be disabled
• When using wired Ethernet with certain Android phones running Android 12, the connection is not always detected automatically
  • Workaround: Reinsert the ethernet adapter, then close and relaunch the application, or simply disable the Wi-Fi
• Occasionally on Samsung Note 20 and S20 Ultra phones, the channels in the list view do not appear
  • Workaround: Close and relaunch the application

Notes 

• User Guide 
• Please report problems and submit general feedback through the app
  • Settings > Help > Send Feedback
• For the best results, ensure your connected devices are updated to the latest firmware using the Shure Update Utility desktop app.
• We recommend using devices and Wi-Fi access points that support Wi-Fi 6 or later.
• Wired Ethernet connection has been tested with the following adapters:  
  • UGREEN Ethernet Adapter USB 2.0 to 10/100 Network RJ45 LAN Wired Adapter
  • INSIGNIA USB 3.0 to Gigabit Ethernet Adapter
  • Nonda USB-A to USB-C Adapter 
• To view the SSID of your network connection type or SSID in the network status bar, you must permit the app access to your location. To do so, go to the Settings app on your Android Phone select Location > App Permissions > Channels, and choose “Allow Only While Using the App”.

Compatibility

• Compatible with Android 12 or later. We can’t ensure compatibility or full-feature functionality with older operating systems. 
• Compatible with most Android phones from Samsung, Google, OnePlus, Motorola, and more.
• To operate this version of ShurePlus Channels with other Shure products, reference the following list of recommended versions: 
  • Axient Digital 1.4.15
  • AD600 1.0.39
  • Axient 2.1.41
  • PSM1000 1.8.6
  • QLX-D 2.7.1
  • SLX-D 1.2.13
  • UHF-R 1.171
  • ULX-D 2.8.7
  • SBC220/240 Two-bay Chargers 1.4.19
  • SBC250/450/850 Networked Charging Stations 2.8.6
  • SBRC Shure Battery Rack Charger 1.1.6
  • Shure Update Utility 2.8.6
  • Wireless Workbench 6.15.4 or 7.2.0