सॉफ्टवेयर और फर्मवेयर अभिलेखागार

Bug Fixes

• Fixed bugs that sometimes caused chargers on the network to become out of sync with Wireless Workbench

Notes

• User Guide
• To operate SBC840M version 1.2.73 with other Shure devices and software, see the following list of minimum versions:
  • Shure Update Utility 2.4.7
  • Wireless Workbench 6.13.2

Bug Fixes

• Fixed bugs that sometimes caused chargers on the network to become out of sync with Wireless Workbench

Notes

• User Guide
• To operate SBC840 version 1.2.73 with other Shure devices and software, see the following list of minimum versions:
• Shure Update Utility 2.4.7
• Wireless Workbench 6.13.2

Bug Fixes

• Fixed bugs that sometimes caused chargers on the network to become out of sync with Wireless Workbench

Notes

• User Guides: SBC220 | SBC240
• To operate SBC220 or SBC240 version 1.2.34 with other Shure devices and software, see the following list of minimum versions:
  • Shure Update Utility 2.4.7
  • Wireless Workbench 6.13.2

Improvements

• Improved mitigation against ShowLink connection failures

Notes

• User Guide
• To operate AD610 version 1.2.73 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 and ADX1/1M/2 Transmitters 1.2.73
  • Axient Digital AD4D/Q Receivers 1.2.73
  • Axient AXT400 Receiver 2.1.11
  • Axient AXT100/200 2.1.11
  • SBRC Shure Battery Rack Charger 1.1.5
  • Shure Update Utility 2.4.7
  • ShurePlus Channels 1.4.2
  • Wireless Workbench 6.13.2

Improvements

• Support for new frequency bands:
  • Indonesia: G63 487 MHz – 636MHz
  • Thailand: P55 694 MHz – 806 MHz
• Improved mitigation against ShowLink connection failures
• Support for Dante Domain Manager and Dante Device Lock

Notes

• User Guide
• Command Strings
• AD4Q version 1.2.73 is compatible with AD4Q devices on version 1.2.73 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate AD4Q version 1.2.73 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 and ADX1/1M/2 Transmitters 1.2.73
  • Axient Digital AD4D/Q Receivers 1.2.73
  • Axient AXT600 Spectrum Manager 2.1.31
  • SBRC Shure Battery Rack Charger 1.1.5
  • Shure Update Utility 2.4.7
  • ShurePlus Channels 1.4.2
  • Wireless Workbench 6.13.2

Improvements

• Support for new frequency bands:
  • Indonesia: G63 487 MHz – 636MHz
  • Thailand: P55 694 MHz – 806 MHz
• Improved mitigation against ShowLink connection failures
• Support for Dante Domain Manager and Dante Device Lock

Notes

• User Guide
• Command Strings
• AD4D version 1.2.73 is compatible with AD4D devices on version 1.2.73 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate AD4D version 1.2.73 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 and ADX1/1M/2 Transmitters 1.2.73
  • Axient Digital AD4D/Q Receivers 1.2.73
  • Axient AXT600 Spectrum Manager 2.1.31
  • SBRC Shure Battery Rack Charger 1.1.5
  • Shure Update Utility 2.4.7
  • ShurePlus Channels 1.4.2
  • Wireless Workbench 6.13.2

Improvements

• Support for new frequency bands:
  • Indonesia: G63 487 MHz – 636MHz
  • Thailand: P55 694 MHz – 806 MHz
• Improved mitigation against ShowLink connection failures

Notes

• User Guides: AD1 | AD2 | ADX1 | ADX1M | ADX2 | ADX2FD
• AD1/2 and ADX1/1M/2 version 1.2.73 is compatible with devices on version 1.2.73 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate AD1/2 and ADX1/1M/2 version 1.2.73 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 and ADX1/1M/2 Transmitters 1.2.73
  • Axient Digital AD4D/Q Receivers 1.2.73
  • Axient AXT600 Spectrum Manager 2.1.31
  • SBC240/840/840M Chargers 1.2.73
  • SBRC Shure Battery Rack Charger 1.1.5
  • Shure Update Utility 2.4.7
  • ShurePlus Channels 1.4.2
  • Wireless Workbench 6.13.2

Improvements

• Custom Presets: Save and reuse your favorite mic settings
• Bug fixes and other performance improvements to reduce crashes and errors when saving

Known Issues

• The FPS and resolution combinations available for selection will vary based on the user’s phone.
• Users of iPhone 8 who are running iOS 11.3 may experience crashes when playing back saved recordings from within the app.
• iPhone XS Max users may experience visual misalignment issues after focusing on an object and then zooming in.
• If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.

NOTES

• MOTIV Video User Guide
• MV88+ Video User Guide
• MV88 User Guide
• Supports iPhone 5S and later – iPad and iPod Touch are not supported
• Compatible with iOS 12 or later

Important

• When upgrading Designer versions, the installer may prompt that the destination folder is not empty; please change the folder name or delete the existing folder and it will automatically be re-created during the upgrade.
• In order to push from virtual devices to online devices, or vice versa, the virtual device and online version must be of running  the same version. For example, all new virtual MXA910s  devices created in Designer 4.1.1 are on version 4.1.X; those virtual devices can only be associated with online devices that are also on version 4.1.xX.
• Designer 4.1.1 is not backwards compatible with Designer 3.2. The database will not be maintained upon downgrading, and Designer 4.1 files cannot be imported into version 3.2.

Improvements

• Resolved a discovery issue when IntelliMix(r) Room is integrated with certain third-party peripheral devices
• Resolved an issue where Designer would not successfully open with certain native languages set as the operating system language

Known Issues

• When using Windows 7, no more than five windows can be open simultaneously.
• With more than 20 devices in location or 60 on the network, some actions will take longer due to increased network traffic.
• When deleting a virtual device, Designer will warn that encryption and password settings will be changed; however, the discovered devices’ encryption and password settings will not be affected.
• When importing a Designer preset file into the MXA910 web application, attempts to immediately export that file out of the web application will fail if it is not first loaded and saved to the MXA910.
• Pull and push operation may cause sync status to say “not synced”,” although the operation was successful; close and reopen the location to fix this
• When soloing a channel on an MXA310, all channels will show as gated on
• When configuring a single MXA910, rotation of the device will only appear in Location > Coverage Map; go to the location to view the rotated device
• If experiencing issues changing the channel count of an IntelliMix Room instance within Designer Software, deactivate the IntelliMix Room instance first, then change the channel count and re-activate
• When using Shure Networked Audio Encryption for IntelliMix Room, you'll see a "key error" for channels without established Dante audio routes. This does not affect device performance and can be ignored.
• When one or more devices in a location are locked by Dante Domain Manager or Dante Device Lock, operations that affect Dante settings may be unreliable, such as audio routing, pushing virtual to online devices, or enabling audio encryption
• When using the P300’s Matrix Mixer on its Schematic tab, vertical scrolling won’t work correctly; navigate to the Matrix Mixer tab to see all channels.
• Unsupported firmware may show an indication that the device is locked by Dante Domain Manager or Dante Device Lock. See the minimum supported firmware versions below.

Notes

• Internet access is required during the installation process
• Designer User Guide
• Designer 4.1.1 is compatible with the following software and firmware versions:
  • IMX-Room version 1.0.4.2
  • MXA910 4.1.41X
  • MXA310 4.1.37X
  • P300 4.1.11X
  • ANIUSB-MATRIX 4.1.39X
• Requires 64-bit Windows 7, 8.1 or 10

IMPORTANT

To update Shure Update Utility version 2.4.3 or earlier to version 2.4.7, download and re-install from www.shure.com/SUU or through Help > Check for Shure Update Utility updates.

IMPROVEMENTS

• Added support for new frequency bands:
  • Axient Digital
    • Thailand: 694.500 – 805.700 MHz frequency band (P55)
    • Thailand: 487.125 – 635.875 MHz frequency band (G63)
• Added Support for new frequency bands:
  • PSM1000
    • USA: 941 – 960 MHz frequency band (X55)
• Updated the Help menu to provide a video tutorial link

KNOWN ISSUES

• PSM1000 devices with firmware version 1.1.0 or earlier must use Shure Update Utility version 2.4.1 or older.
  • Version 2.4.1
    • 32-bit Windows 7, 8, 10
    • 64-bit Windows 7, 8, 10
    • 64-bit Mac OS X 10.10-10.12
  • Previous Versions
• Selecting "Help" > "Check for Shure Update Utility updates" will open Shure.com, which offers the latest version of Shure Update Utility to download. Shure Update Utility version 2.4.2 or greater will not automatically detect new versions.
• 32-Bit Windows:
  • To update Shure Update Utility version 2.2.2 or earlier on a 32-bit Windows system, download version 2.4.2 or greater for 32-bit systems to re-install the software. Older versions of Shure Update Utility will not detect new updates of Shure Update Utility that support 32-bit systems.
  • Shure Update Utility version 2.4.5 for 32-bit systems is compatible with Wireless Workbench 6 version 6.12.1 and earlier.
• Attempts to download ULXD6/8 transmitter firmware to a ULX-D or QLX-D receiver that is not at the minimum firmware version, shown below, will fail. To update firmware for ULXD6/8 transmitters with ULX-D or QLX-D receivers:
  • Update receivers to the following minimum versions:
    • ULXD4, ULXD4D, ULXD4Q Receivers 2.1.16
    • QLXD4 Receivers 2.1.5
  • Using Shure Update Utility, download ULXD6/8 transmitter firmware to the receivers.
  • Using the FW Update menu on a receiver, update transmitters.
• Microflex Wireless devices running version 1.X firmware must first be updated to version 2.0.5 before being updated to version 3.X or later.
• USB-C MacBook Pro laptops with the Touch Bar running macOS High Sierra, Mojave, and Catalina will fail to discover GLX-D devices. We are currently investigating this issue.

NOTES

• Shure Update Utility is supported on the following operating systems:
  • Windows 7, 8 and 10
  • macOS High Sierra (10.13), Mojave (10.14), and Catalina (10.15)
• Installing Shure Update Utility on Windows will also prompt the installation of a USB driver, which must be installed to support updating USB devices, such as GLX-D.
• USB 2.0 Devices
  • KSE1500, SHA900, and GLX-D must be updated one-at-a-time.
  • USB hubs are not recommended when updating USB 2.0 connected devices. Always connect these devices directly to a USB on the computer running Shure Update Utility.
• Shure Update Utility 2.4.2 or greater for 64-bit systems is compatible with Wireless Workbench 6.12.2 or later.
• Shure Update Utility 2.4.2 or greater for 32-bit systems is compatible with Wireless Workbench 6.12 or earlier.