Downloads

Software & Firmware Archives

Filter by update type

Type

Release Title

Latest Version

Associated Products

Scarica

Firmware
1.4.7

Recommendation

  • Update all Axient Digital devices in a configuration to the same firmware version.

 Notes

  • User Guide
  • Command Strings
  • To operate this version of AD4Q with other Shure systems and software, see the following list of recommended versions:
    • Axient Digital AD1/2, ADX1/1M/2/2FD and AD3 Transmitters 1.4.7
    • Axient Digital AD4D/Q Receivers 1.4.7
    • AD600 Axient Digital Spectrum Manager 1.0.38
    • Axient AXT600 Spectrum Manager 2.1.41
    • ShurePlus Channels iOS 1.5.2
    • ShurePlus Channels Android 1.1.1
    • Shure Update Utility 2.7.2
    • Wireless Workbench 6.15.2
Firmware
1.4.7

Notes

  • User Guide
  • To operate this version of ADX5D with other Shure systems and software, see the following list of recommended versions:
    • Axient Digital AD1/2, ADX1/1M/2 and AD3 Transmitters 1.4.7
    • Axient Digital AD4D/Q Receivers 1.4.7
    • Axient Digital AD610 Diversity ShowLink® Access Point 1.3.45
    • AD600 Axient Digital Spectrum Manager 1.0.38
    • Axient AXT600 Spectrum Manager 2.1.41
    • ShurePlus Channels iOS 1.5.2
    • ShurePlus Channels Android 1.1.1
    • Shure Update Utility 2.7.2
    • Wireless Workbench 6.15.2
Firmware
1.3.289

Improvements

  • Improved talker position accuracy by using a control string command ARRAY_HEIGHT_OVERRIDE to specify the Array Height
  • Improved talker position sensitivity when the talker is not facing the array

Known Issues

  • The optional ARRAY_HEIGHT_OVERRIDE value sent via command strings must be resent upon power cycle.
  • If the ARRAY_HEIGHT_OVERRIDE command is used to set a height that is outside the valid range (122-914 cm), the command will not display an error but internally, the value will be rejected from being set.
  • Acoustic reflections from tables can sometimes be mistaken by the MXA920 as another source/talker location.  The symptom is a second talker location coordinate set in front of and higher than the actual talker.
    • Workaround:  Place Coverage Areas to minimize pick-up of table surface reflections.
  • Channel Names are not set in the initial attempt of ‘push-to-Dante’. Dante interface resets when Device Name is set.
    • Workaround: Channel Names are set on the 2nd attempt.
  • MXA920 LED does not stay on after a reboot if the light settings are set to Unmute = Blue, Mute = Red.  Other light combinations work as expected after reboot.
  • When a muted dynamic coverage area is moved when a dedicated coverage area has also been established, the mix output of the MXA920 has low-level audio from outside the dedicated coverage area limits.
    • Workaround: Unmute and Mute the dynamic coverage area after a dynamic coverage area is moved.

Notes

  • User Guide
  • Command Strings
  • Note that Talker Position Events are published for talkers in a coverage area regardless of the mute status of the coverage area.  To fully inform camera switching decision logic, subscribe to the Coverage Area Mute Status. See https://pubs.shure.com/command-strings for further information
  • To operate this version of MXA920 with Dante Controller, reference the following minimum versions:
    • v3.10.2.4 (Windows)
    • v3.10.2.3 (Mac OS X)
  • To operate this version of MXA920 with Shure software or other Shure networked systems, reference the following list of recommended versions supported:
    • Designer 4.7.5
    • IntelliMix Room 4.0.0
    • ANI22/ANI4IN/ANI4OUT 4.7.6
    • ANIUSB-MATRIX 4.7.17
    • MXA310 4.7.8
    • MXA710 1.5.16
    • MXA910 4.7.13
    • MXN5-C 1.5.12
    • MXA-MUTE 1.5.16
    • P300 4.7.17
    • Shure Update Utility 2.7.2
    • Shure Web Device Discovery 1.2.17
Firmware
1.3.289

Improvements

  • Improved talker position accuracy by using a control string command ARRAY_HEIGHT_OVERRIDE to specify the Array Height
  • Improved talker position sensitivity when the talker is not facing the array

Known Issues

  • The optional ARRAY_HEIGHT_OVERRIDE value sent via command strings must be resent upon power cycle.
  • If the ARRAY_HEIGHT_OVERRIDE command is used to set a height that is outside the valid range (122-914 cm), the command will not display an error but internally, the value will be rejected from being set.
  • Acoustic reflections from tables can sometimes be mistaken by the MXA920 as another source/talker location.  The symptom is a second talker location coordinate set in front of and higher than the actual talker.
    • Workaround:  Place Coverage Areas to minimize pick-up of table surface reflections.
  • Channel Names are not set in the initial attempt of ‘push-to-Dante’. Dante interface resets when Device Name is set.
    • Workaround: Channel Names are set on the 2nd attempt.
  • MXA920 LED does not stay on after a reboot if the light settings are set to Unmute = Blue, Mute = Red.  Other light combinations work as expected after reboot.
  • When a muted dynamic coverage area is moved when a dedicated coverage area has also been established, the mix output of the MXA920 has low-level audio from outside the dedicated coverage area limits.
    • Workaround: Unmute and Mute the dynamic coverage area after a dynamic coverage area is moved.

Notes

  • User Guide
  • Command Strings
  • Note that Talker Position Events are published for talkers in a coverage area regardless of the mute status of the coverage area.  To fully inform camera switching decision logic, subscribe to the Coverage Area Mute Status. See https://pubs.shure.com/command-strings for further information
  • To operate this version of MXA920 with Dante Controller, reference the following minimum versions:
    • v3.10.2.4 (Windows)
    • v3.10.2.3 (Mac OS X)
  • To operate this version of MXA920 with Shure software or other Shure networked systems, reference the following list of recommended versions supported:
    • Designer 4.7.5
    • IntelliMix Room 4.0.0
    • ANI22/ANI4IN/ANI4OUT 4.7.6
    • ANIUSB-MATRIX 4.7.17
    • MXA310 4.7.8
    • MXA710 1.5.16
    • MXA910 4.7.13
    • MXN5-C 1.5.12
    • MXA-MUTE 1.5.16
    • P300 4.7.17
    • Shure Update Utility 2.7.2
    • Shure Web Device Discovery 1.2.17
Firmware
2.8.0

Improvements

  • API to enable control and monitoring of Stem devices via third-party control systems
  • Further Speaker sound improvements
  • Further (significant) Ceiling sound improvements
  • Added support for time zone 5.5 for India and other countries
  • Fixed an issue with the Heatmap toggle not working

Notes

Firmware
2.7.0

Improvements

  • Implemented a feature to hide the on-screen clock when the system is not able to display the correct time (i.e. does not have internet connection)
  • Added support for time zone 5.5 for India and other countries
  • Fixed an issue with the Heatmap not displaying correctly

Notes

Firmware
1.4.7

Notes

  • User Guide
  • To operate this version of AD610 with other Shure systems and software, see the following list of recommended versions:
    • Axient Digital AD1/2, ADX1/1M/2/2FD and AD3 Transmitters 1.4.7
    • Axient Digital AD4D/Q Receivers 1.4.7
    • Axient AXT400 Receiver 2.1.11 (REV1 AD610 only)
    • Axient AXT100/200 2.1.11 (REV1 AD610 only)
    • ShurePlus Channels iOS 1.5.2
    • ShurePlus Channels Android 1.1.1
    • Shure Update Utility 2.7.2
    • Wireless Workbench 6.15.2
Firmware
1.4.7

Notes

  • User Guides: SBC220 | SBC240
  • To operate this version of SBC220 or SBC240 with other Shure devices and software, see the following list of recommended versions:
    • Shure Update Utility 2.7.2
    • Wireless Workbench 6.15.2
Firmware
1.4.7

 Notes

  • User Guide
  • To operate this version of SBC840 with other Shure devices and software, see the following list of recommended versions:
    • Shure Update Utility 2.7.2
    • Wireless Workbench 6.15.2
Firmware
1.4.7

Notes

  • User Guide
  • To operate this version of SBC840M with other Shure devices and software, see the following list of recommended versions:
    • Shure Update Utility 2.7.2
    • Wireless Workbench 6.15.2