Software & Firmware Archives
Important
QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.
Improvements
- Support for new frequency bands:
- Thailand 694 – 703 MHz frequency band (M19)
- Thailand 748 – 758 MHz frequency band (Q12)
Notes
- To operate QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on version 2.X firmware or later.
- To operate QLX-D version 2.3.22 devices with other Shure networked systems and software, see the following list of minimum versions:
- ULX-D ULXD4/4D/4Q Receivers 2.4.9
- Axient AXT600 Spectrum Manager 2.1.22
- PSM1000 P10T Transmitters 1.7.6
- Wireless Workbench 6.13.1
- Shure Update Utility 2.4.6
- ShurePlus Channels 1.4.2
These release notes cover the following models:
- MXWNCS2/4/8 Networked Charging Stations
- MXWANI4/8 Audio Network Interfaces
- MXWAPT2/4/8 Access Point Transceivers
- MXW1/2/6/8 Wireless Microphones
Related Links
Improvements
- Implementation of additional security features, including expanded password capabilities
- MXW devices now advertise Dante/AES67 capability in the Shure Web Device Discovery Application
- New Device Reboot button added to the MXWANI Web UI.
- Improvements to the microphones’ out-of-range detection capabilities when moved outside the wireless coverage area of the MXWAPT.
Japan-specific improvements:
- J-DECT update: Microflex Wireless now features up to 96 channels in HD mode to meet J-DECT requirements, adding additional channels (dependent on modes and interference) as well as an improved handling of PHS presence.
In areas with no PHS interference, the new maximum channel capacity is:
| Pre 8.0.3 FW Versions | After 8.0.3 FW Update |
| 40 SD channels | 48 SD Channels |
| 80 HD channels | 96 HD Channels |
However, when PHS interference is present, the maximum number of channels changes to:
| Pre 8.0.3 FW Versions | After 8.0.3 FW Update |
| 16 SD channels | 32 SD Channels |
| 32 HD channels | 64 HD Channels |
Important Note: For customers in Japan that have an existing MXW installation, a unique, one-off update procedure must be performed to take advantage of these additional microphone channels. Without this procedure, the other improvements mentioned above will still take effect but without the J-DECT update. This procedure needs to be conducted onsite by Shure personnel — please contact your local Shure representative for details.
Bug Fixes
- APT2 is not discovered by Shure Device Discovery app following a reboot or factory reset using Dante Controller
- Spectrum scan on an MXW-APT no longer responsive after Density-Mode change
- Spectrum scan calculation of available channels in a given RF environment shows wrong results
- Mics lose pairing after Density-Mode change
- MXW8: Carrier mismatch strings not being shown in selected language
Known Issues
- SystemOn 3.0.1 is compatible with MXW 8.0.3, but will incorrectly warn “Check system requirements, your current firmware version may not be confirmed compatible.”
- Multiple Grand Master Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
- MXWAPT8: MCU/GUI - Older firmware microphones are not shown in Utility tab
Notes
- To operate MXW version 8.0.3 with other Shure networked systems, see the following list of minimum software and firmware versions:
- SCM820 1.3.3
- Shure Web Device Discovery 1.2.5Shure Update Utility 2.4.6
- SystemOn 3.2
These release notes cover the following models:
- MXWNCS2/4/8 Networked Charging Stations
- MXWANI4/8 Audio Network Interfaces
- MXWAPT2/4/8 Access Point Transceivers
- MXW1/2/6/8 Wireless Microphones
Related Links
Improvements
- Implementation of additional security features, including expanded password capabilities
- MXW devices now advertise Dante/AES67 capability in the Shure Web Device Discovery Application
- New Device Reboot button added to the MXWANI Web UI.
- Improvements to the microphones’ out-of-range detection capabilities when moved outside the wireless coverage area of the MXWAPT.
Japan-specific improvements:
- J-DECT update: Microflex Wireless now features up to 96 channels in HD mode to meet J-DECT requirements, adding additional channels (dependent on modes and interference) as well as an improved handling of PHS presence.
In areas with no PHS interference, the new maximum channel capacity is:
| Pre 8.0.3 FW Versions | After 8.0.3 FW Update |
| 40 SD channels | 48 SD Channels |
| 80 HD channels | 96 HD Channels |
However, when PHS interference is present, the maximum number of channels changes to:
| Pre 8.0.3 FW Versions | After 8.0.3 FW Update |
| 16 SD channels | 32 SD Channels |
| 32 HD channels | 64 HD Channels |
Important Note: For customers in Japan that have an existing MXW installation, a unique, one-off update procedure must be performed to take advantage of these additional microphone channels. Without this procedure, the other improvements mentioned above will still take effect but without the J-DECT update. This procedure needs to be conducted onsite by Shure personnel — please contact your local Shure representative for details.
Bug Fixes
- APT2 is not discovered by Shure Device Discovery app following a reboot or factory reset using Dante Controller
- Spectrum scan on an MXW-APT no longer responsive after Density-Mode change
- Spectrum scan calculation of available channels in a given RF environment shows wrong results
- Mics lose pairing after Density-Mode change
- MXW8: Carrier mismatch strings not being shown in selected language
Known Issues
- SystemOn 3.0.1 is compatible with MXW 8.0.3, but will incorrectly warn “Check system requirements, your current firmware version may not be confirmed compatible.”
- Multiple Grand Master Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
- MXWAPT8: MCU/GUI - Older firmware microphones are not shown in Utility tab
Notes
- To operate MXW version 8.0.3 with other Shure networked systems, see the following list of minimum software and firmware versions:
- SCM820 1.3.3
- Shure Web Device Discovery 1.2.5Shure Update Utility 2.4.6
- SystemOn 3.2
These release notes cover the following models:
- MXWNCS2/4/8 Networked Charging Stations
- MXWANI4/8 Audio Network Interfaces
- MXWAPT2/4/8 Access Point Transceivers
- MXW1/2/6/8 Wireless Microphones
Related Links
Improvements
- Implementation of additional security features, including expanded password capabilities
- MXW devices now advertise Dante/AES67 capability in the Shure Web Device Discovery Application
- New Device Reboot button added to the MXWANI Web UI.
- Improvements to the microphones’ out-of-range detection capabilities when moved outside the wireless coverage area of the MXWAPT.
Japan-specific improvements:
- J-DECT update: Microflex Wireless now features up to 96 channels in HD mode to meet J-DECT requirements, adding additional channels (dependent on modes and interference) as well as an improved handling of PHS presence.
In areas with no PHS interference, the new maximum channel capacity is:
| Pre 8.0.3 FW Versions | After 8.0.3 FW Update |
| 40 SD channels | 48 SD Channels |
| 80 HD channels | 96 HD Channels |
However, when PHS interference is present, the maximum number of channels changes to:
| Pre 8.0.3 FW Versions | After 8.0.3 FW Update |
| 16 SD channels | 32 SD Channels |
| 32 HD channels | 64 HD Channels |
Important Note: For customers in Japan that have an existing MXW installation, a unique, one-off update procedure must be performed to take advantage of these additional microphone channels. Without this procedure, the other improvements mentioned above will still take effect but without the J-DECT update. This procedure needs to be conducted onsite by Shure personnel — please contact your local Shure representative for details.
Bug Fixes
- APT2 is not discovered by Shure Device Discovery app following a reboot or factory reset using Dante Controller
- Spectrum scan on an MXW-APT no longer responsive after Density-Mode change
- Spectrum scan calculation of available channels in a given RF environment shows wrong results
- Mics lose pairing after Density-Mode change
- MXW8: Carrier mismatch strings not being shown in selected language
Known Issues
- SystemOn 3.0.1 is compatible with MXW 8.0.3, but will incorrectly warn “Check system requirements, your current firmware version may not be confirmed compatible.”
- Multiple Grand Master Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
- MXWAPT8: MCU/GUI - Older firmware microphones are not shown in Utility tab
Notes
- To operate MXW version 8.0.3 with other Shure networked systems, see the following list of minimum software and firmware versions:
- SCM820 1.3.3
- Shure Web Device Discovery 1.2.5Shure Update Utility 2.4.6
- SystemOn 3.2
These release notes cover the following models:
- MXWNCS2/4/8 Networked Charging Stations
- MXWANI4/8 Audio Network Interfaces
- MXWAPT2/4/8 Access Point Transceivers
- MXW1/2/6/8 Wireless Microphones
Related Links
Improvements
- Implementation of additional security features, including expanded password capabilities
- MXW devices now advertise Dante/AES67 capability in the Shure Web Device Discovery Application
- New Device Reboot button added to the MXWANI Web UI.
- Improvements to the microphones’ out-of-range detection capabilities when moved outside the wireless coverage area of the MXWAPT.
Japan-specific improvements:
- J-DECT update: Microflex Wireless now features up to 96 channels in HD mode to meet J-DECT requirements, adding additional channels (dependent on modes and interference) as well as an improved handling of PHS presence.
In areas with no PHS interference, the new maximum channel capacity is:
| Pre 8.0.3 FW Versions | After 8.0.3 FW Update |
| 40 SD channels | 48 SD Channels |
| 80 HD channels | 96 HD Channels |
However, when PHS interference is present, the maximum number of channels changes to:
| Pre 8.0.3 FW Versions | After 8.0.3 FW Update |
| 16 SD channels | 32 SD Channels |
| 32 HD channels | 64 HD Channels |
Important Note: For customers in Japan that have an existing MXW installation, a unique, one-off update procedure must be performed to take advantage of these additional microphone channels. Without this procedure, the other improvements mentioned above will still take effect but without the J-DECT update. This procedure needs to be conducted onsite by Shure personnel — please contact your local Shure representative for details.
Bug Fixes
- APT2 is not discovered by Shure Device Discovery app following a reboot or factory reset using Dante Controller
- Spectrum scan on an MXW-APT no longer responsive after Density-Mode change
- Spectrum scan calculation of available channels in a given RF environment shows wrong results
- Mics lose pairing after Density-Mode change
- MXW8: Carrier mismatch strings not being shown in selected language
Known Issues
- SystemOn 3.0.1 is compatible with MXW 8.0.3, but will incorrectly warn “Check system requirements, your current firmware version may not be confirmed compatible.”
- Multiple Grand Master Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
- MXWAPT8: MCU/GUI - Older firmware microphones are not shown in Utility tab
Notes
- To operate MXW version 8.0.3 with other Shure networked systems, see the following list of minimum software and firmware versions:
- SCM820 1.3.3
- Shure Web Device Discovery 1.2.5Shure Update Utility 2.4.6
- SystemOn 3.2
These release notes cover the following models:
- MXWNCS2/4/8 Networked Charging Stations
- MXWANI4/8 Audio Network Interfaces
- MXWAPT2/4/8 Access Point Transceivers
- MXW1/2/6/8 Wireless Microphones
Related Links
Improvements
- Implementation of additional security features, including expanded password capabilities
- MXW devices now advertise Dante/AES67 capability in the Shure Web Device Discovery Application
- New Device Reboot button added to the MXWANI Web UI.
- Improvements to the microphones’ out-of-range detection capabilities when moved outside the wireless coverage area of the MXWAPT.
Japan-specific improvements:
- J-DECT update: Microflex Wireless now features up to 96 channels in HD mode to meet J-DECT requirements, adding additional channels (dependent on modes and interference) as well as an improved handling of PHS presence.
In areas with no PHS interference, the new maximum channel capacity is:
| Pre 8.0.3 FW Versions | After 8.0.3 FW Update |
| 40 SD channels | 48 SD Channels |
| 80 HD channels | 96 HD Channels |
However, when PHS interference is present, the maximum number of channels changes to:
| Pre 8.0.3 FW Versions | After 8.0.3 FW Update |
| 16 SD channels | 32 SD Channels |
| 32 HD channels | 64 HD Channels |
Important Note: For customers in Japan that have an existing MXW installation, a unique, one-off update procedure must be performed to take advantage of these additional microphone channels. Without this procedure, the other improvements mentioned above will still take effect but without the J-DECT update. This procedure needs to be conducted onsite by Shure personnel — please contact your local Shure representative for details.
Bug Fixes
- APT2 is not discovered by Shure Device Discovery app following a reboot or factory reset using Dante Controller
- Spectrum scan on an MXW-APT no longer responsive after Density-Mode change
- Spectrum scan calculation of available channels in a given RF environment shows wrong results
- Mics lose pairing after Density-Mode change
- MXW8: Carrier mismatch strings not being shown in selected language
Known Issues
- SystemOn 3.0.1 is compatible with MXW 8.0.3, but will incorrectly warn “Check system requirements, your current firmware version may not be confirmed compatible.”
- Multiple Grand Master Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
- MXWAPT8: MCU/GUI - Older firmware microphones are not shown in Utility tab
Notes
- To operate MXW version 8.0.3 with other Shure networked systems, see the following list of minimum software and firmware versions:
- SCM820 1.3.3
- Shure Web Device Discovery 1.2.5Shure Update Utility 2.4.6
- SystemOn 3.2
These release notes cover the following models:
- MXWNCS2/4/8 Networked Charging Stations
- MXWANI4/8 Audio Network Interfaces
- MXWAPT2/4/8 Access Point Transceivers
- MXW1/2/6/8 Wireless Microphones
Related Links
Improvements
- Implementation of additional security features, including expanded password capabilities
- MXW devices now advertise Dante/AES67 capability in the Shure Web Device Discovery Application
- New Device Reboot button added to the MXWANI Web UI.
- Improvements to the microphones’ out-of-range detection capabilities when moved outside the wireless coverage area of the MXWAPT.
Japan-specific improvements:
- J-DECT update: Microflex Wireless now features up to 96 channels in HD mode to meet J-DECT requirements, adding additional channels (dependent on modes and interference) as well as an improved handling of PHS presence.
In areas with no PHS interference, the new maximum channel capacity is:
| Pre 8.0.3 FW Versions | After 8.0.3 FW Update |
| 40 SD channels | 48 SD Channels |
| 80 HD channels | 96 HD Channels |
However, when PHS interference is present, the maximum number of channels changes to:
| Pre 8.0.3 FW Versions | After 8.0.3 FW Update |
| 16 SD channels | 32 SD Channels |
| 32 HD channels | 64 HD Channels |
Important Note: For customers in Japan that have an existing MXW installation, a unique, one-off update procedure must be performed to take advantage of these additional microphone channels. Without this procedure, the other improvements mentioned above will still take effect but without the J-DECT update. This procedure needs to be conducted onsite by Shure personnel — please contact your local Shure representative for details.
Bug Fixes
- APT2 is not discovered by Shure Device Discovery app following a reboot or factory reset using Dante Controller
- Spectrum scan on an MXW-APT no longer responsive after Density-Mode change
- Spectrum scan calculation of available channels in a given RF environment shows wrong results
- Mics lose pairing after Density-Mode change
- MXW8: Carrier mismatch strings not being shown in selected language
Known Issues
- SystemOn 3.0.1 is compatible with MXW 8.0.3, but will incorrectly warn “Check system requirements, your current firmware version may not be confirmed compatible.”
- Multiple Grand Master Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
- MXWAPT8: MCU/GUI - Older firmware microphones are not shown in Utility tab
Notes
- To operate MXW version 8.0.3 with other Shure networked systems, see the following list of minimum software and firmware versions:
- SCM820 1.3.3
- Shure Web Device Discovery 1.2.5Shure Update Utility 2.4.6
- SystemOn 3.2
These release notes cover the following models:
- MXWNCS2/4/8 Networked Charging Stations
- MXWANI4/8 Audio Network Interfaces
- MXWAPT2/4/8 Access Point Transceivers
- MXW1/2/6/8 Wireless Microphones
Related Links
Improvements
- Implementation of additional security features, including expanded password capabilities
- MXW devices now advertise Dante/AES67 capability in the Shure Web Device Discovery Application
- New Device Reboot button added to the MXWANI Web UI.
- Improvements to the microphones’ out-of-range detection capabilities when moved outside the wireless coverage area of the MXWAPT.
Japan-specific improvements:
- J-DECT update: Microflex Wireless now features up to 96 channels in HD mode to meet J-DECT requirements, adding additional channels (dependent on modes and interference) as well as an improved handling of PHS presence.
In areas with no PHS interference, the new maximum channel capacity is:
| Pre 8.0.3 FW Versions | After 8.0.3 FW Update |
| 40 SD channels | 48 SD Channels |
| 80 HD channels | 96 HD Channels |
However, when PHS interference is present, the maximum number of channels changes to:
| Pre 8.0.3 FW Versions | After 8.0.3 FW Update |
| 16 SD channels | 32 SD Channels |
| 32 HD channels | 64 HD Channels |
Important Note: For customers in Japan that have an existing MXW installation, a unique, one-off update procedure must be performed to take advantage of these additional microphone channels. Without this procedure, the other improvements mentioned above will still take effect but without the J-DECT update. This procedure needs to be conducted onsite by Shure personnel — please contact your local Shure representative for details.
Bug Fixes
- APT2 is not discovered by Shure Device Discovery app following a reboot or factory reset using Dante Controller
- Spectrum scan on an MXW-APT no longer responsive after Density-Mode change
- Spectrum scan calculation of available channels in a given RF environment shows wrong results
- Mics lose pairing after Density-Mode change
- MXW8: Carrier mismatch strings not being shown in selected language
Known Issues
- SystemOn 3.0.1 is compatible with MXW 8.0.3, but will incorrectly warn “Check system requirements, your current firmware version may not be confirmed compatible.”
- Multiple Grand Master Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
- MXWAPT8: MCU/GUI - Older firmware microphones are not shown in Utility tab
Notes
- To operate MXW version 8.0.3 with other Shure networked systems, see the following list of minimum software and firmware versions:
- SCM820 1.3.3
- Shure Web Device Discovery 1.2.5Shure Update Utility 2.4.6
- SystemOn 3.2
IMPROVEMENTS
Bug fixes
NOTES
- User Guide
- MV88+ User Guide
- Compatible with Android 6.0 and higher.
- NOTE FOR MV88+ USERS: Learn about compatibility with your Android device at www.shure.com/MOTIVcompatibility.
Important
- This software release can be used to make new SW6000 installations or upgrade all previous SW6000 installed versions; however it cannot be used to upgrade systems using CU 6005, CU 6010 or CU 6011 Central Units
- This version is compatible with SW6000 Software License file v1.7 only
- No new SW6000 license is needed if upgrading from SW6000 v6.0.xxx or later versions
- A new SW6000 license is needed if upgrading from SW6000 v5.8.xxx or previous versions
New Features
- CAA
- Support for MXCIC C-channel
- CUA
- Interpretation control support for MXCIC
- Include control of multiple interpreter devices on the same screen
- Agenda icons updated
- CDA
- Support for MXCIC C-Channel
Bug Fixes
- CUA
- The application now indicates the correct CDA display in the display screen after users press the 'Prepare meeting' button
- Fixed an issue where an exception occurred when the CUA window was resized
- CDA
- Meeting variables are now cleared when a vote is cancelled
- No longer uses a default configuration at meeting start/stop when none is selected
- Fixed a problem where there was an unstable connection when another CDA is shut down
- CAA
- Fixed an error in formatting in 'Total Vote Result' window
- Users can now cancel report generation if data is not present
- Voting reports have been corrected for ‘No login’ type meetings
- Update button is now activated after editing groups in the grid for participant table
- It’s no longer possible to create reply configurations without a name
- The Date filter in ‘Default participant seat table’ now works as expected
- Subject vote report in No login mode no longer shows the wrong results
- Fixed an issue where an error message appeared when clicking the ‘Replace unit’ or ‘Mic scan’ button in Setup | Conference units window
- Fixed an issue where the Pre-request to speak list shown for an agenda subject was sometimes empty even though a pre-request existed
- Fixed an issue where importing participants to the participant table failed
- Operational buttons are no longer disabled after updating the name sign page.
- Users are now able to import 1,000 Agenda subjects
- CUI
- Fixed an issue where speech time was not sent to CCU when CUI reconnected
- Database
- Users are now able to install a database using the ‘Remove All’ button during installation
- Added a fix for updating the ‘Delegate List History’
Notes
- To operate MXC devices with SW6000 version 6.9, the minimum firmware version is 8.5.1.