アプリ

MOTIV - iOS

バージョン

掲載日

ダウンロード

4.3.1
2024年10月1日
App Storeからダウンロード

Improvements

  • This release requires Shure MoveMic Receiver (MV-R) users to update to the latest firmware for iOS 18 compatibility
  • Bug fixes

Known Issues

  • Intermittent issue on USB-C iOS devices where MV6 microphone is undiscovered after locking the phone for several minutes

Notes

Compatibility

  • This app is compatible with iOS 16 or later. We can’t ensure compatibility or full-feature functionality with older operating systems.
  • Compatible with iPhone, iPad, and Apple Watch
4.3.0
2024年9月5日
ダウンロード不可

Improvements

  • Support for the new Shure MV6
  • Bug fixes

Known Issues

  • Intermittent issue on USB-C iOS devices where MV6 microphone is undiscovered after locking the phone for several minutes

Notes

Compatibility

  • This app is compatible with iOS 16 or later. We can’t ensure compatibility or full-feature functionality with older operating systems.
  • Compatible with iPhone, iPad, and Apple Watch
4.2.0
2024年8月12日
ダウンロード不可

Improvements

  • Bug fixes

Notes

Compatibility

  • This app is compatible with iOS 16 or later. We can’t ensure compatibility or full-feature functionality with older operating systems.
  • Compatible with iPhone, iPad, and Apple Watch
4.1.1
2024年4月24日
ダウンロード不可

Improvements

  • Bug fixes

Notes

Compatibility

  • This app is compatible with iOS 16 or later. We can’t ensure compatibility or full-feature functionality with older operating systems.
  • Compatible with iPhone, iPad, and Apple Watch
4.1.0
2024年4月9日
ダウンロード不可

Improvements

  • Support for the new Shure MV7+
  • Bug fixes

Notes

Compatibility

  • This app is compatible with iOS 16 or later. We can’t ensure compatibility or full-feature functionality with older operating systems.
  • Compatible with iPhone, iPad, and Apple Watch
4.0.0
2024年3月27日
ダウンロード不可

Improvements

  • Firmware improvements for MoveMic
  • General bug fixes

Notes

Compatibility

  • This app is compatible with iOS 16 or later. We can’t ensure compatibility or full-feature functionality with older operating systems.
  • Compatible with iPhone, iPad, and Apple Watch
3.8.0
2024年3月4日
ダウンロード不可

Improvements

  • Support for the new Shure MoveMic
  • General bug fixes

Notes

Compatibility

  • This app is compatible with iOS 16 or later. We can’t ensure compatibility or full-feature functionality with older operating systems.
  • Compatible with iPhone, iPad, iPod touch, and Apple Watch
3.7.7
2023年9月18日
ダウンロード不可

Improvements

  • Support for USB-C iPads with MV7 and MV88+

Known Issues

  • A small percentage of users may receive a numerical error message while recording, such as “-1” or “66570.” These messages occur when there was an error writing to the device and are related to Apple’s new file system (APFS). One of these errors can occur even if your device has plenty of remaining storage. We recommend clearing up your device storage from the Settings screen, and if that doesn’t resolve the issues, doing a full restore from iTunes, consisting of backing up your device, wiping/restoring to factory settings, and restoring from the backup.
  • If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.

Notes

Compatibility

  • This app is compatible with iOS 14 or later. We can’t ensure compatibility or full feature functionality with older operating systems.
  • Compatible with iPhone, iPad, iPod touch, and Apple Watch
3.7.6
2023年2月13日
ダウンロード不可

Improvements

  • Bug fixes

Known Issues

  • A small percentage of users may receive a numerical error message while recording, such as “-1” or “66570.” These messages occur when there was an error writing to the device and are related to Apple’s new file system (APFS). One of these errors can occur even if your device has plenty of remaining storage. We recommend clearing up your device storage from the Settings screen, and if that doesn’t resolve the issues, doing a full restore from iTunes, consisting of backing up your device, wiping/restoring to factory settings, and restoring from the backup.
  • If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.
  • When connected to iPad Pro via a USB-C cable, the MV88+ will pass audio and gain can be adjusted. However, the MOTIV apps will only display ‘external mic’, and the settings screen will not be available. Shure recommends using another device to configure the settings before using with iPad Pro. No adjustments can be made in real-time (except gain) on the Shure MOTIV apps when using an iPad Pro.

Notes

3.7.5
2022年11月9日
ダウンロード不可

Improvements

  • Fixed issue related to recording with 44.1kHz sample rate on iOS 16

Known Issues

  • A small percentage of users may receive a numerical error message while recording, such as “-1” or “66570.” These messages occur when there was an error writing to the device and are related to Apple’s new file system (APFS). One of these errors can occur even if your device has plenty of remaining storage. We recommend clearing up your device storage from the Settings screen, and if that doesn’t resolve the issues, doing a full restore from iTunes, consisting of backing up your device, wiping/restoring to factory settings, and restoring from the backup.
  • If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.
  • When connected to iPad Pro via a USB-C cable, the MV88+ will pass audio and gain can be adjusted. However, the MOTIV apps will only display ‘external mic’, and the settings screen will not be available. Shure recommends using another device to configure the settings before using with iPad Pro. No adjustments can be made in real-time (except gain) on the Shure MOTIV apps when using an iPad Pro.

Notes

3.7.4
2022年9月12日
ダウンロード不可

Important

  • Shure is currently looking into an issue with iOS 16 compatibility. Some functions may not work as expected.

Known Issues

  • A small percentage of users may receive a numerical error message while recording, such as “-1” or “66570.” These messages occur when there was an error writing to the device and are related to Apple’s new file system (APFS). One of these errors can occur even if your device has plenty of remaining storage. We recommend clearing up your device storage from the Settings screen, and if that doesn’t resolve the issues, doing a full restore from iTunes, consisting of backing up your device, wiping/restoring to factory settings, and restoring from the backup.
  • If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.
  • When connected to iPad Pro via a USB-C cable, the MV88+ will pass audio and gain can be adjusted. However, the MOTIV apps will only display ‘external mic’, and the settings screen will not be available. Shure recommends using another device to configure the settings before using with iPad Pro. No adjustments can be made in real-time (except gain) on the Shure MOTIV apps when using an iPad Pro.

Notes

3.7.2
2022年8月8日
ダウンロード不可

Improvements

  • Addressed issues related to recording crashes
  • Additional bug fixes

Known Issues

  • A small percentage of users may receive a numerical error message while recording, such as “-1” or “66570.” These messages occur when there was an error writing to the device and are related to Apple’s new file system (APFS). One of these errors can occur even if your device has plenty of remaining storage. We recommend clearing up your device storage from the Settings screen, and if that doesn’t resolve the issues, doing a full restore from iTunes, consisting of backing up your device, wiping/restoring to factory settings, and restoring from the backup.
  • If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.
  • When connected to iPad Pro via a USB-C cable, the MV88+ will pass audio and gain can be adjusted. However, the MOTIV apps will only display ‘external mic’, and the settings screen will not be available. Shure recommends using another device to configure the settings before using with iPad Pro. No adjustments can be made in real-time (except gain) on the Shure MOTIV apps when using an iPad Pro.

Notes

3.7.1
2022年7月17日
ダウンロード不可

Improvements

  • Bug fixes

Known Issues

  • A small percentage of users may receive a numerical error message while recording, such as “-1” or “66570.” These messages occur when there was an error writing to the device and are related to Apple’s new file system (APFS). One of these errors can occur even if your device has plenty of remaining storage. We recommend clearing up your device storage from the Settings screen, and if that doesn’t resolve the issues, doing a full restore from iTunes, consisting of backing up your device, wiping/restoring to factory settings, and restoring from the backup.
  • If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.
  • When connected to iPad Pro via a USB-C cable, the MV88+ will pass audio and gain can be adjusted. However, the MOTIV apps will only display ‘external mic’, and the settings screen will not be available. Shure recommends using another device to configure the settings before using with iPad Pro. No adjustments can be made in real-time (except gain) on the Shure MOTIV apps when using an iPad Pro.

Notes

3.7.0
2022年7月13日
ダウンロード不可

Improvements

  • Minor enhancements to meters
  • Bug fixes

Known Issues

  • A small percentage of users may receive a numerical error message while recording, such as “-1” or “66570.” These messages occur when there was an error writing to the device and are related to Apple’s new file system (APFS). One of these errors can occur even if your device has plenty of remaining storage. We recommend clearing up your device storage from the Settings screen, and if that doesn’t resolve the issues, doing a full restore from iTunes, consisting of backing up your device, wiping/restoring to factory settings, and restoring from the backup.
  • If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.
  • When connected to iPad Pro via a USB-C cable, the MV88+ will pass audio and gain can be adjusted. However, the MOTIV apps will only display ‘external mic’, and the settings screen will not be available. Shure recommends using another device to configure the settings before using with iPad Pro. No adjustments can be made in real-time (except gain) on the Shure MOTIV apps when using an iPad Pro.

Notes

3.6.5
2022年5月25日
ダウンロード不可

Improvements

  • Additional bug fix for app crash

Known Issues

  • A small percentage of users may receive a numerical error message while recording, such as “-1” or “66570.” These messages occur when there was an error writing to the device and are related to Apple’s new file system (APFS). One of these errors can occur even if your device has plenty of remaining storage. We recommend clearing up your device storage from the Settings screen, and if that doesn’t resolve the issues, doing a full restore from iTunes, consisting of backing up your device, wiping/restoring to factory settings, and restoring from the backup.
  • If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.
  • When connected to iPad Pro via a USB-C cable, the MV88+ will pass audio and gain can be adjusted. However, the MOTIV apps will only display ‘external mic’, and the settings screen will not be available. Shure recommends using another device to configure the settings before using with iPad Pro. No adjustments can be made in real-time (except gain) on the Shure MOTIV apps when using an iPad Pro.

Notes

3.6.4
2022年5月11日
ダウンロード不可

Improvements

  • Addressed bugs related to app crashes

Known Issues

  • A small percentage of users may receive a numerical error message while recording, such as “-1” or “66570.” These messages occur when there was an error writing to the device and are related to Apple’s new file system (APFS). One of these errors can occur even if your device has plenty of remaining storage. We recommend clearing up your device storage from the Settings screen, and if that doesn’t resolve the issues, doing a full restore from iTunes, consisting of backing up your device, wiping/restoring to factory settings, and restoring from the backup.
  • If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.
  • When connected to iPad Pro via a USB-C cable, the MV88+ will pass audio and gain can be adjusted. However, the MOTIV apps will only display ‘external mic’, and the settings screen will not be available. Shure recommends using another device to configure the settings before using with iPad Pro. No adjustments can be made in real-time (except gain) on the Shure MOTIV apps when using an iPad Pro.

Notes

3.6.3
2022年4月12日
ダウンロード不可

Improvements

  • Addressed bug where the app continuously prompts users to update firmware even when they are on the most current version

Known Issues

  • A small percentage of users may receive a numerical error message while recording, such as “-1” or “66570.” These messages occur when there was an error writing to the device and are related to Apple’s new file system (APFS). One of these errors can occur even if your device has plenty of remaining storage. We recommend clearing up your device storage from the Settings screen, and if that doesn’t resolve the issues, doing a full restore from iTunes, consisting of backing up your device, wiping/restoring to factory settings, and restoring from the backup.
  • If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.
  • When connected to iPad Pro via a USB-C cable, the MV88+ will pass audio and gain can be adjusted. However, the MOTIV apps will only display ‘external mic’, and the settings screen will not be available. Shure recommends using another device to configure the settings before using with iPad Pro. No adjustments can be made in real-time (except gain) on the Shure MOTIV apps when using an iPad Pro.

Notes

3.6.2
2022年3月14日
ダウンロード不可

Improvements

  • Addressed bug where no audio is recorded while using the Mono Cardioid or Bidirectional polar patterns

Known Issues

  • A small percentage of users may receive a numerical error message while recording, such as “-1” or “66570.” These messages occur when there was an error writing to the device and are related to Apple’s new file system (APFS). One of these errors can occur even if your device has plenty of remaining storage. We recommend clearing up your device storage from the Settings screen, and if that doesn’t resolve the issues, doing a full restore from iTunes, consisting of backing up your device, wiping/restoring to factory settings, and restoring from the backup.
  • If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.
  • When connected to iPad Pro via a USB-C cable, the MV88+ will pass audio and gain can be adjusted. However, the MOTIV apps will only display ‘external mic’, and the settings screen will not be available. Shure recommends using another device to configure the settings before using with iPad Pro. No adjustments can be made in real-time (except gain) on the Shure MOTIV apps when using an iPad Pro.

Notes

3.6.1
2022年3月7日
ダウンロード不可

Improvements

  • Addressed bug where firmware update continues to prompt user, even after the update is complete

Known Issues

  • A small percentage of users may receive a numerical error message while recording, such as “-1” or “66570.” These messages occur when there was an error writing to the device and are related to Apple’s new file system (APFS). One of these errors can occur even if your device has plenty of remaining storage. We recommend clearing up your device storage from the Settings screen, and if that doesn’t resolve the issues, doing a full restore from iTunes, consisting of backing up your device, wiping/restoring to factory settings, and restoring from the backup.
  • If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.
  • When connected to iPad Pro via a USB-C cable, the MV88+ will pass audio and gain can be adjusted. However, the MOTIV apps will only display ‘external mic’, and the settings screen will not be available. Shure recommends using another device to configure the settings before using with iPad Pro. No adjustments can be made in real-time (except gain) on the Shure MOTIV apps when using an iPad Pro.

Notes

3.6.0
2022年2月16日
ダウンロード不可

Improvements

  • Bug fixes

Known Issues

  • A small percentage of users may receive a numerical error message while recording, such as “-1” or “66570.” These messages occur when there was an error writing to the device and are related to Apple’s new file system (APFS). One of these errors can occur even if your device has plenty of remaining storage. We recommend clearing up your device storage from the Settings screen, and if that doesn’t resolve the issues, doing a full restore from iTunes, consisting of backing up your device, wiping/restoring to factory settings, and restoring from the backup.
  • If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.
  • When connected to iPad Pro via a USB-C cable, the MV88+ will pass audio and gain can be adjusted. However, the MOTIV apps will only display ‘external mic’, and the settings screen will not be available. Shure recommends using another device to configure the settings before using with iPad Pro. No adjustments can be made in real time (except gain) on the Shure MOTIV apps when using an iPad Pro.

Notes

3.5.0
2021年12月17日
ダウンロード不可

Improvements

  • VoiceOver improvements
  • Bug fixes

Known Issues

  • A small percentage of users may receive a numerical error message while recording, such as “-1” or “66570.” These messages occur when there was an error writing to the device and are related to Apple’s new file system (APFS). One of these errors can occur even if your device has plenty of remaining storage. We recommend clearing up your device storage from the Settings screen, and if that doesn’t resolve the issues, doing a full restore from iTunes, consisting of backing up your device, wiping/restoring to factory settings, and restoring from the backup.
  • If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.
  • When connected to iPad Pro via a USB-C cable, the MV88+ will pass audio and gain can be adjusted. However, the MOTIV apps will only display ‘external mic’, and the settings screen will not be available. Shure recommends using another device to configure the settings before using with iPad Pro. No adjustments can be made in real time (except gain) on the Shure MOTIV apps when using an iPad Pro.

Notes

3.4.0
2021年11月10日
ダウンロード不可

New Features

  • Enhance – post processing editor feature for audio recordings
  • Online App User Guide

Improvements

  • Bug fixes

Known Issues

  • A small percentage of users may receive a numerical error message while recording, such as “-1” or “66570.” These messages occur when there was an error writing to the device and are related to Apple’s new file system (APFS). One of these errors can occur even if your device has plenty of remaining storage. We recommend clearing up your device storage from the Settings screen, and if that doesn’t resolve the issues, doing a full restore from iTunes, consisting of backing up your device, wiping/restoring to factory settings, and restoring from the backup.
  • If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.
  • When connected to iPad Pro via a USB-C cable, the MV88+ will pass audio and gain can be adjusted. However, the MOTIV apps will only display ‘external mic’, and the settings screen will not be available. Shure recommends using another device to configure the settings before using with iPad Pro. No adjustments can be made in real time (except gain) on the Shure MOTIV apps when using an iPad Pro.

Notes

3.3.0
2021年7月26日
ダウンロード不可

New Features

  • Sort/Search User Recordings
  • Reminder to back up recordings

Improvements

  • User interface improvements
  • Bug fixes

Known Issues

  • A small percentage of users may receive a numerical error message while recording, such as “-1” or “66570.” These messages occur when there was an error writing to the device and are related to Apple’s new file system (APFS). One of these errors can occur even if your device has plenty of remaining storage. We recommend clearing up your device storage from the Settings screen, and if that doesn’t resolve the issues, doing a full restore from iTunes, consisting of backing up your device, wiping/restoring to factory settings, and restoring from the backup.
  • If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.
  • When connected to iPad Pro via a USB-C cable, the MV88+ will pass audio and gain can be adjusted. However, the MOTIV apps will only display ‘external mic’, and the settings screen will not be available. Shure recommends using another device to configure the settings before using with iPad Pro. No adjustments can be made in real time (except gain) on the Shure MOTIV apps when using an iPad Pro.

Notes

3.2.4
2021年7月6日
ダウンロード不可

Improvements

  • Bug fixes

Known Issues

  • A small percentage of users may receive a numerical error message while recording, such as “-1” or “66570.” These messages occur when there was an error writing to the device and are related to Apple’s new file system (APFS). One of these errors can occur even if your device has plenty of remaining storage. We recommend clearing up your device storage from the Settings screen, and if that doesn’t resolve the issues, doing a full restore from iTunes, consisting of backing up your device, wiping/restoring to factory settings, and restoring from the backup.
  • If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.
  • When connected to iPad Pro via a USB-C cable, the MV88+ will pass audio and gain can be adjusted. However, the MOTIV apps will only display ‘external mic’, and the settings screen will not be available. Shure recommends using another device to configure the settings before using with iPad Pro. No adjustments can be made in real time (except gain) on the Shure MOTIV apps when using an iPad Pro.

Notes

3.2.3
2021年6月25日
ダウンロード不可

Improvements

  • Bug fixes

Known Issues

  • A small percentage of users may receive a numerical error message while recording, such as “-1” or “66570.” These messages occur when there was an error writing to the device and are related to Apple’s new file system (APFS). One of these errors can occur even if your device has plenty of remaining storage. We recommend clearing up your device storage from the Settings screen, and if that doesn’t resolve the issues, doing a full restore from iTunes, consisting of backing up your device, wiping/restoring to factory settings, and restoring from the backup.
  • If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.
  • When connected to iPad Pro via a USB-C cable, the MV88+ will pass audio and gain can be adjusted. However, the MOTIV apps will only display ‘external mic’, and the settings screen will not be available. Shure recommends using another device to configure the settings before using with iPad Pro. No adjustments can be made in real time (except gain) on the Shure MOTIV apps when using an iPad Pro.

Notes

3.2.2
2021年6月15日
ダウンロード不可

改善点

  • バグ修正

既知の問題点

  • 稀に録音中に「-1」や「66570」など数字のエラーメッセージが表示されることがあります。これらのメッセージはApple社の新しいファイルシステム（APFS）に関連するもので、デバイスへの書き込みエラーが発生すると表示されます。これらのエラーの1つは、ストレージが十分に残っている場合でも発生することがあります。まず、「設定」>「一般」>「iPhoneストレージ」画面で必要のないファイルを削除してデバイスのストレージの空き容量を増やすことをお勧めします。それでも問題が解決しない場合は、デバイスの復元（デバイスをバックアップし、工場出荷時の状態に戻した後、バックアップから復元）を行ってください。
  • Bluetoothイヤホンでモニターする場合、モニタリング中にノイズなどの異音が聞こえることがあります。その場合、サンプルレートを変更することをお勧めします。製品によって44.1 kHzで異音が発生する場合もあれば、48 kHzで異音が発生する場合もあります。なお、モニタリング中に異音が聞こえても録音自体には影響しません。
  • MV88+をUSB-CケーブルでiPad Proに接続すると音声が伝送され、ゲイン調整が可能ですが、MOTIVアプリに「external mic」と表示されるだけで、設定画面が表示されません。iPad Proと使用する前に別のデバイスを使って設定を行うことをお勧めします。iPad Proを使用する場合、Shure MOTIVアプリでリアルタイム調整は行えません（ゲインを除く）。

注記

  • MV7ユーザーガイド
  • MV88+ユーザーガイド
  • MV88ユーザーガイド
  • よくある質問
  • このアプリはiOS 13.0以降に対応しています。それ以前のオペレーティングシステムとの互換性または完全な正常動作は保証できません。問題の報告や全体的なフィードバックはアプリからお送りください（About > Feedback）。
  • iPhone、iPad、iPod touch、およびApple Watchに対応しています。
3.2.1
2021年5月17日
ダウンロード不可

新機能

  • 圧縮形式での録音および圧縮形式へのファイル変換

改善点

  • バグ修正

既知の問題点

  • 稀に録音中に「-1」や「66570」など数字のエラーメッセージが表示されることがあります。これらのメッセージはApple社の新しいファイルシステム（APFS）に関連するもので、デバイスへの書き込みエラーが発生すると表示されます。これらのエラーの1つは、ストレージが十分に残っている場合でも発生することがあります。まず、「設定」>「一般」>「iPhoneストレージ」画面で必要のないファイルを削除してデバイスのストレージの空き容量を増やすことをお勧めします。それでも問題が解決しない場合は、デバイスの復元（デバイスをバックアップし、工場出荷時の状態に戻した後、バックアップから復元）を行ってください。
  • Bluetoothイヤホンでモニターする場合、モニタリング中にノイズなどの異音が聞こえることがあります。その場合、サンプルレートを変更することをお勧めします。製品によって44.1 kHzで異音が発生する場合もあれば、48 kHzで異音が発生する場合もあります。なお、モニタリング中に異音が聞こえても録音自体には影響しません。
  • MV88+をUSB-CケーブルでiPad Proに接続すると音声が伝送され、ゲイン調整が可能ですが、MOTIVアプリに「external mic」と表示されるだけで、設定画面が表示されません。iPad Proと使用する前に別のデバイスを使って設定を行うことをお勧めします。iPad Proを使用する場合、Shure MOTIVアプリでリアルタイム調整は行えません（ゲインを除く）。

注記

  • MV7ユーザーガイド
  • MV88+ユーザーガイド
  • MV88ユーザーガイド
  • よくある質問
  • このアプリはiOS 13.0以降に対応しています。それ以前のオペレーティングシステムとの互換性または完全な正常動作は保証できません。問題の報告や全体的なフィードバックはアプリからお送りください（About > Feedback）。
  • iPhone、iPad、iPod touch、およびApple Watchに対応しています。
3.2.0
2021年3月30日
ダウンロード不可

新機能

  • 再生中のMV88+のミュート
  • ライト / ダークモード
  • iOSの「ファイル」アプリケーションとの統合

改善点

  • ナビゲーションタブや配色など、アプリのデザインを更新
  • モニターミックスを更新
  • バグ修正

既知の問題点

  • 稀に録音中に「-1」や「66570」などの数字のエラーメッセージが表示されることがあります。これらのメッセージはApple社の新しいファイルシステム（APFS）に関連するもので、デバイスへの書き込みエラーが発生すると表示されます。これらのエラーの1つは、ストレージが十分に残っている場合でも発生することがあります。まず、「設定」>「一般」>「iPhoneストレージ」画面で必要のないファイルを削除してデバイスのストレージの空き容量を増やすことをお勧めします。それでも問題が解決しない場合は、デバイスの復元（デバイスをバックアップし、工場出荷時の状態に戻した後、バックアップから復元）を行ってください。
  • Bluetoothイヤホンでモニターする場合、モニタリング中にノイズなどの異音が聞こえることがあります。その場合、サンプルレートを変更することをお勧めします。製品によって44.1 kHzで異音が発生する場合もあれば、48 kHzで異音が発生する場合もあります。なお、モニタリング中に異音が聞こえても録音自体には影響しません。
  • MV88+をUSB-CケーブルでiPad Proに接続すると音声が伝送され、ゲイン調整が可能ですが、MOTIVアプリに「external mic」と表示されるだけで、設定画面が表示されません。iPad Proと使用する前に別のデバイスを使って設定を行うことをお勧めします。iPad Proを使用する場合、Shure MOTIVアプリでリアルタイム調整は行えません（ゲインを除く）。

注記

3.1.0
2020年12月14日
ダウンロード不可

改善点

  • バグ修正

既知の問題点

  • 稀に録音中に「-1」や「66570」など数字のエラーメッセージが表示されることがあります。これらのメッセージはApple社の新しいファイルシステム（APFS）に関連するもので、デバイスへの書き込みエラーが発生すると表示されます。これらのエラーの1つは、ストレージが十分に残っている場合でも発生することがあります。まず、「設定」>「一般」>「iPhoneストレージ」画面で必要のないファイルを削除してデバイスのストレージの空き容量を増やすことをお勧めします。それでも問題が解決しない場合は、デバイスの復元（デバイスをバックアップし、工場出荷時の状態に戻した後、バックアップから復元）を行ってください。
  • Bluetoothイヤホンでモニターする場合、モニタリング中にノイズなどの異音が聞こえることがあります。その場合、サンプルレートを変更することをお勧めします。製品によって44.1 kHzで異音が発生する場合もあれば、48 kHzで異音が発生する場合もあります。なお、モニタリング中に異音が聞こえても録音自体には影響しません。
  • MV88+をUSB-CケーブルでiPad Proに接続すると音声が伝送され、ゲイン調整が可能ですが、MOTIVアプリに「external mic」と表示されるだけで、設定画面が表示されません。iPad Proと使用する前に別のデバイスを使って設定を行うことをお勧めします。iPad Proを使用する場合、Shure MOTIVアプリでリアルタイム調整は行えません（ゲインを除く）。

Notes

3.0.2
2020年10月26日
ダウンロード不可

Improvements

  • MV7ポッドキャストマイクロホンをサポート
  • バグ修正

既知の問題点

  • 録音中に「-1」や「66570」などの数字のエラーメッセージが表示されることがあります。これらのメッセージはAppleの新しいファイルシステム（APFS）に関連するもので、デバイスへの書き込みエラーが発生すると表示されます。これらのエラーの1つは、ストレージが十分に残っている場合でも発生することがあります。まず、「設定」>「一般」>「iPhoneストレージ」画面で必要のないファイルを削除してデバイスのストレージの空き容量を増やすことをお勧めします。それでも問題が解決しない場合は、デバイスの復元（デバイスをバックアップし、工場出荷時の状態に戻した後、バックアップから復元）を行ってください。
  • Bluetoothイヤホンでモニターする場合、モニタリング中にノイズなどの異音が聞こえることがあります。その場合、サンプルレートを変更することをお勧めします。製品によって44.1 kHzで異音が発生する場合もあれば、48 kHzで異音が発生する場合もあります。なお、モニタリング中に異音が聞こえても録音自体には影響しません。
  • MV88+をUSB-CケーブルでiPad Proに接続すると音声が伝送され、ゲイン調整が可能ですが、MOTIVアプリに「external mic」と表示されるだけで、設定画面が表示されません。iPad Proと使用する前に別のデバイスを使って設定を行うことをお勧めします。iPad Proを使用する場合、Shure MOTIVアプリでリアルタイム調整は行えません（ゲインを除く）。

注記

3.0.1
2020年9月25日
ダウンロード不可

Improvements

  • Bug fixes

Known Issues

  • A small percentage of users may receive a numerical error message while recording, such as “-1” or “66570.” These messages occur when there was an error writing to the device and are related to Apple’s new file system (APFS). One of these errors can occur even if your device has plenty of remaining storage. We recommend clearing up your device storage from the Settings screen, and if that doesn’t resolve the issues, doing a full restore from iTunes, consisting of backing up your device, wiping/restoring to factory settings, and restoring from the backup.
  • If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.
  • When connected to iPad Pro via a USB-C cable, the MV88+ will pass audio and gain can be adjusted. However, the MOTIV apps will only display ‘external mic’, and the settings screen will not be available. Shure recommends using another device to configure the settings before using with iPad Pro. No adjustments can be made in real time (except gain) on the Shure MOTIV apps when using an iPad Pro.

Notes

  • MV88+ User Guide
  • MV88 User Guide
  • Frequently asked questions
  • This app is compatible with iOS 11.3 or later. We can’t ensure compatibility or full feature functionality with older operating systems. Please report problems and submit general feedback through the app (About > Feedback)
  • Compatible with iPhone, iPad, and iPod touch
3.0.0
2020年9月14日
ダウンロード不可

新機能

  • Apple Watchのコントロール
  • 「Recently Deleted」（最近削除したファイル）フォルダー

改善点

  • バグ修正

既知の問題点

  • 録音中に「-1」や「66570」などの数字のエラーメッセージが表示されることがあります。これらのメッセージはAppleの新しいファイルシステム（APFS）に関連するもので、デバイスへの書き込みエラーが発生すると表示されます。これらのエラーの1つは、ストレージが十分に残っている場合でも発生することがあります。まず、「設定」>「一般」>「iPhoneストレージ」画面で必要のないファイルを削除してデバイスのストレージの空き容量を増やすことをお勧めします。それでも問題が解決しない場合は、デバイスの復元（デバイスをバックアップし、工場出荷時の状態に戻した後、バックアップから復元）を行ってください。
  • Bluetoothイヤホンでモニターする場合、モニタリング中にノイズなどの異音が聞こえることがあります。その場合、サンプルレートを変更することをお勧めします。製品によって44.1 kHzで異音が発生する場合もあれば、48 kHzで異音が発生する場合もあります。なお、モニタリング中に異音が聞こえても録音自体には影響しません。
  • MV88+をUSB-CケーブルでiPad Proに接続すると音声が伝送され、ゲイン調整が可能ですが、MOTIVアプリに「external mic」と表示されるだけで、設定画面が表示されません。iPad Proと使用する前に別のデバイスを使って設定を行うことをお勧めします。iPad Proを使用する場合、Shure MOTIVアプリでリアルタイム調整は行えません（ゲインを除く）。

注記

  • MV88+ユーザーガイド
  • MV88 ユーザーガイド
  • FAQ
  • このアプリはiOS 11.3以降に対応しています。それ以前のオペレーティングシステムとの互換性または完全動作は保証できません。問題の報告や全体的なフィードバックはアプリからお送りください（「About」>「Feedback」）。
  • iPhone、iPad、およびiPod touchに対応しています。
2.7.0
2020年7月14日
ダウンロード不可

改善点

  • バグ修正
  • MV88+ファームウェア更新により断続的に発生するループおよび接続の問題を修正

既知の問題点

  • 録音中に「-1」や「66570」などの数字のエラーメッセージが表示されることがあります。これらのメッセージはAppleの新しいファイルシステム（APFS）に関連するもので、デバイスへの書き込みエラーが発生すると表示されます。これらのエラーの1つは、ストレージが十分に残っている場合でも発生することがあります。まず、「設定」>「一般」>「iPhone ストレージ」画面で必要のないファイルを削除してデバイスのストレージの空き容量を増やすことをお勧めします。それでも問題が解決しない場合は、デバイスの復元（デバイスをバックアップし、工場出荷時の状態に戻した後、バックアップから復元）を行ってください。
  • Bluetoothイヤホンでモニターする場合、モニタリング中にノイズなどの異音が聞こえることがあります。その場合、サンプルレートを変更することをお勧めします。製品によって44.1 kHzで異音が発生する場合もあれば、48 kHzで異音が発生する場合もあります。なお、モニタリング中に異音が聞こえても録音自体には影響しません。
  • MV88+をUSB-CケーブルでiPad Proに接続すると音声が伝送され、ゲイン調整が可能ですが、MOTIVアプリに「external mic」と表示されるだけで、設定画面が表示されません。iPad Proと使用する前に別のデバイスを使って設定を行うことをお勧めします。iPad Proを使用する場合、Shure MOTIVアプリでリアルタイム調整は行えません（ゲインを除く）。

注記

  • MV88+ ユーザーガイド
  • MV88 ユーザーガイド
  • FAQ
  • このアプリはiOS 11.3以降に対応しています。それ以前のオペレーティングシステムとの互換性または完全動作は保証できません。問題の報告や全体的なフィードバックはアプリからお送りください（「About」>「Feedback」）。
  • iPhone、iPad、およびiPod touchに対応しています。
2.6.2
2019年8月20日
ダウンロード不可

Improvements

  • Bug fixes
  • Fixes for VoiceOver

Known Issues

  • A small percentage of users may receive a numerical error message while recording, such as “-1” or “66570.” These messages occur when there was an error writing to the device and are related to Apple’s new file system (APFS). One of these errors can occur even if your device has plenty of remaining storage. We recommend clearing up your device storage from the Settings screen, and if that doesn’t resolve the issues, doing a full restore from iTunes, consisting of backing up your device, wiping/restoring to factory settings, and restoring from the backup.
  • If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.
  • When connected to iPad Pro via a USB-C cable, the MV88+ will pass audio and gain can be adjusted. However, the MOTIV apps will only display ‘external mic’, and the settings screen will not be available. Shure recommends using another device to configure the settings before using with iPad Pro. No adjustments can be made in real time (except gain) on the Shure MOTIV apps when using an iPad Pro.

Notes

2.6.1
2019年7月15日
ダウンロード不可
IMPROVEMENTS

Bug fixes

 

KNOWN ISSUES

A small percentage of users may receive a numerical error message while recording, such as “-1” or “66570.” These messages occur when there was an error writing to the device and are related to Apple’s new file system (APFS). One of these errors can occur even if your device has plenty of remaining storage. We recommend clearing up your device storage from the Settings screen, and if that doesn’t resolve the issues, doing a full restore from iTunes, consisting of backing up your device, wiping/restoring to factory settings, and restoring from the backup.

If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.

When connected to iPad Pro via a USB-C cable, the MV88+ will pass audio and gain can be adjusted. However, the MOTIV apps will only display ‘external mic’, and the settings screen will not be available. Shure recommends using another device to configure the settings before using with iPad Pro. No adjustments can be made in real time (except gain) on the Shure MOTIV apps when using an iPad Pro.

 

NOTES
2.6.0
2019年5月22日
ダウンロード不可

IMPROVEMENTS

  • Custom Presets: Save and reuse your favorite mic settings
  • Bug fixes

KNOWN ISSUES

  • A small percentage of users may receive a numerical error message while recording, such as “-1” or “66570.” These messages occur when there was an error writing to the device and are related to Apple’s new file system (APFS). One of these errors can occur even if your device has plenty of remaining storage. We recommend clearing up your device storage from the Settings screen, and if that doesn’t resolve the issues, doing a full restore from iTunes, consisting of backing up your device, wiping/restoring to factory settings, and restoring from the backup.
  • If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.
  • When connected to iPad Pro via a USB-C cable, the MV88+ will pass audio and gain can be adjusted. However, the MOTIV apps will only display ‘external mic’, and the settings screen will not be available. Shure recommends using another device to configure the settings before using with iPad Pro. No adjustments can be made in real time (except gain) on the Shure MOTIV apps when using an iPad Pro.

NOTES

2.5.3
2019年2月19日
ダウンロード不可
改善点
  • バグ修正

既知の問題点
  • 録音中に「-1」や「66570」などの数字のエラーメッセージが表示されることがあります。これらのメッセージはAppleの新しいファイルシステム（APFS）に関連するもので、デバイスへの書き込みエラーが発生すると表示されます。これらのエラーの1つは、ストレージが十分に残っている場合でも発生することがあります。まず、「設定」>「一般」>「iPhone ストレージ」画面で必要のないファイルを削除してデバイスのストレージの空き容量を増やすことをお勧めします。それでも問題が解決しない場合は、デバイスの復元（デバイスをバックアップし、工場出荷時の状態に戻した後、バックアップから復元）を行ってください。
     
  • Bluetoothイヤホンでモニターする場合、モニタリング中にノイズなどの異音が聞こえることがあります。その場合、サンプルレートを変更することをお勧めします。製品によって44.1 kHzで異音が発生する場合もあれば、48 kHzで異音が発生する場合もあります。なお、モニタリング中に異音が聞こえても録音自体には影響しません。

注記
2.5.2
2019年1月18日
ダウンロード不可
改善点
  • デモモード：MOTIVマイクロホンを使ってできることを紹介します。
既知の問題点
  • 録音中に「-1」や「66570」などの数字のエラーメッセージが表示されることがあります。これらのメッセージはAppleの新しいファイルシステム（APFS）に関連するもので、デバイスへの書き込みエラーが発生すると表示されます。これらのエラーの1つは、ストレージが十分に残っている場合でも発生することがあります。まず、「設定」>「一般」>「iPhone ストレージ」画面で必要のないファイルを削除してデバイスのストレージの空き容量を増やすことをお勧めします。それでも問題が解決しない場合は、デバイスの復元（デバイスをバックアップし、工場出荷時の状態に戻した後、バックアップから復元）を行ってください。
  • Bluetoothイヤホンでモニターする場合、モニタリング中にノイズなどの異音が聞こえることがあります。その場合、サンプルレートを変更することをお勧めします。製品によって44.1 kHzで異音が発生する場合もあれば、48 kHzで異音が発生する場合もあります。なお、モニタリング中に異音が聞こえても録音自体には影響しません。

 

注記

 

2.5.0
2019年1月7日
ダウンロード不可

Improvements

  • Support for the MV88+ digital stereo condenser microphone
  • Bug fixes

Known Issues

  • A small percentage of users may receive a numerical error message while recording, such as “-1” or “66570.” These messages occur when there was an error writing to the device and are related to Apple’s new file system (APFS). One of these errors can occur even if your device has plenty of remaining storage. We recommend clearing up your device storage in Settings > General > iPhone Storage, and if that doesn’t resolve the issue, doing a factory reset, consisting of backing up your device, restoring to factory settings, and restoring from the backup.
  • If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.

Notes

2.2.0
2018年11月9日
ダウンロード不可

Improvements

  • Arabic support
  • Improved support for landscape mode
  • Bug fixes

Known Issues

  • In iOS 11.0, iPhone would not always recognize when an MV88 microphone was connected. If you are experiencing this issue, please upgrade to iOS version 11.1 or higher.
  • A small percentage of users may receive a numerical error message while recording, such as “-1” or “66570.” These messages occur when there was an error writing to the device and are related to Apple’s new file system (APFS). One of these errors can occur even if your device has plenty of remaining storage. We recommend clearing up your device storage from the Settings screen, and if that doesn’t resolve the issues, doing a full restore from iTunes, consisting of backing up your device, wiping/restoring to factory settings, and restoring from the backup.
  • If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.

Notes

2.1.6
2018年3月29日
ダウンロード不可

Improvements

  • Bug fixes

Known Issues

  • In iOS 11.0, iPhone would not always recognize when an MV88 microphone was connected. If you are experiencing this issue, please upgrade to iOS version 11.1 or higher.
  • A small percentage of users may receive a numerical error message while recording, such as “-1” or “66570.” These messages occur when there was an error writing to the device and are related to Apple’s new file system (APFS). One of these errors can occur even if your device has plenty of remaining storage. We recommend clearing up your device storage from the Settings screen, and if that doesn’t resolve the issues, doing a full restore from iTunes, consisting of backing up your device, wiping/restoring to factory settings, and restoring from the backup.
  • If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.

Notes

2.1.5
2018年2月12日
ダウンロード不可

Improvements

  • Bug fixes, including for an issue where in-app emails were not responsive

Known Issues

  • Some users of iPhone 8 or iPhone X may experience silence or noisy artifacts on their recordings. These are due to an issue that was introduced with the release of these phone models in November, 2017. Apple has resolved the issue and scheduled the fix for an upcoming release.
  • In iOS 11.0, the iPhone would not always recognize when an MV88 microphone was connected. If you are experiencing this issue, please upgrade to iOS version 11.1 or higher.
  • A small percentage of users may receive a numerical error message while recording, such as “-1” or “66570.” These messages occur when there was an error writing to the device and are related to Apple’s new file system (APFS). One of these errors can occur even if your device has plenty of remaining storage. We recommend clearing up your device storage from the Settings screen, and if that doesn’t resolve the issues, doing a full restore from iTunes, consisting of backing up your device, wiping/restoring to factory settings, and restoring from the backup.
  • If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.

Notes

 

2.1.4
2018年1月22日
ダウンロード不可

Improvements

  • Visual improvements for iPhone X
  • Bug fixes

Known Issues

  • Some users of iPhone 8 or iPhone X may experience silence or noisy artifacts on their recordings. These are due to an issue that was introduced with the release of these phone models in November, 2017. Until issues with how these devices communicate with USB microphones are fixed by Apple, we’re unable to resolve this. We have reported this problem to Apple and are working with them to find a solution.
  • In iOS 11.0, the iPhone would not always recognize when an MV88 microphone was connected. If you are experiencing this issue, please upgrade to iOS version 11.1 or higher.
  • A small percentage of users may receive a numerical error message while recording, such as “-1” or “66570.” These messages occur when there was an error writing to the device and are related to Apple’s new file system (APFS). One of these errors can occur even if your device has plenty of remaining storage. We recommend clearing up your device storage from the Settings screen, and if that doesn’t resolve the issues, doing a full restore from iTunes, consisting of backing up your device, wiping/restoring to factory settings, and restoring from the backup.
  • If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.

Notes

2.1.3
2017年9月16日
ダウンロード不可

Improvements

  • iOS 11 compatibility
  • Bug fixes

Known Issues

  • There may be isolated incidents where the app freezes or loses connection to the microphone in iOS 11, especially if you leave the app or lock your phone with the mic connected, then reopen it. If this happens, force-close the app and unplug and re-plug the microphone.
  • If you switch to another app by double-tapping the home button, your mic gain may change. We recommend switching between apps by single-tapping the home button and then opening the other app.
  • We advise against using Apple AirPods Bluetooth headphones to monitor recordings, as this can lead to changes in mic gain or unwanted noise on the recording.

Notes

関連製品

ShurePlus MOTIV™

ShurePlus MOTIV™

MOTIVデジタルマイクロホン／インターフェース製品専用iOSアプリ。24-bit/48kHzの高品質デジタル 録音、リアルタイムモニタリングや調整が可能です。