Downloads
Archiwum oprogramowania i firmware
Firmware
2.4.25
February 17, 2021
Zobacz wszystkie aktualizacje
Important
- ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.
- ULXD4D and ULXD4Q receivers running firmware prior to 1.4.8 must be updated to 1.4.8 before updating to newer versions.
- ULXD4D and ULXD4Q receivers running firmware between 1.4.8 and 2.0.28 must be updated to 2.0.28 before updating to newer versions.
- After 2.0.28 is installed, ULXD4D and ULXD4Q receivers can be updated to the latest available firmware version.
- ULX-D devices that are downgrading to 1.5.6 may report a false failure.
- Workaround: Because this is a false failure, closing the send updates window and going to the main page, Shure Update Utility will show green for the firmware version.
Improvements
- Changed the default RF band from AB to JB for ULXD4=-AB receivers
- Add support for China 470 MHz – 510 MHz frequency band (G53)
Notes
- User Guide
- ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
- Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
- Align the infrared ports with the transmitter
- Press ENTER
- To operate ULX-D version 2.3.25 devices with other Shure networked systems and software, see the following list of minimum versions:
- ULXD1/2/6/8 Transmitters and ULXD4/4D/4Q Receivers 2.3.25
- SBC250/450/850 Networked Charging Stations 2.4.9
- QLX-D QLXD1/2 Transmitters and QLXD4 Receivers 2.3.24
- PSM1000 1.7.10
- Axient AXT600 Spectrum Manager 2.1.31
- Wireless Workbench 6.14.0
- Shure Update Utility 2.5.1
- ShurePlus Channels 1.4.5
Firmware
2.4.25
February 17, 2021
Zobacz wszystkie aktualizacje
Important
- ULXD4D and ULXD4Q receivers running firmware prior to 1.4.8 must be updated to 1.4.8 before updating to newer versions.
- ULXD4D and ULXD4Q receivers running firmware between 1.4.8 and 2.0.28 must be updated to 2.0.28 before updating to newer versions.
- After 2.0.28 is installed, ULXD4D and ULXD4Q receivers can be updated to the latest available firmware version.
- ULX-D devices that are downgrading to 1.5.6 may report a false failure.
- Workaround: Because this is a false failure, closing the send updates window and going to the main page, Shure Update Utility will show green for the firmware version.
- ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.
Improvements
- Changed the default RF band from AB to JB for ULXD4=-AB receivers
- Add support for China 470 MHz – 510 MHz frequency band (G53)
Notes
- User Guide
- ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
- Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
- Align the infrared ports with the transmitter
- Press ENTER
- To operate ULX-D version 2.3.25 devices with other Shure networked systems and software, see the following list of minimum versions:
- ULXD1/2/6/8 Transmitters and ULXD4/4D/4Q Receivers 2.3.25
- SBC250/450/850 Networked Charging Stations 2.4.9
- QLX-D QLXD1/2 Transmitters and QLXD4 Receivers 2.3.24
- PSM1000 1.7.10
- Axient AXT600 Spectrum Manager 2.1.31
- Wireless Workbench 6.14.0
- Shure Update Utility 2.5.1
- ShurePlus Channels 1.4.5
Firmware
2.4.25
February 17, 2021
Zobacz wszystkie aktualizacje
Important
- ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.
Improvements
- Changed the default RF band from AB to JB for ULXD4=-AB receivers
- Add support for China 470 MHz – 510 MHz frequency band (G53)
Notes
- User Guide
- ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
- Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
- Align the infrared ports with the transmitter
- Press ENTER
- To operate ULX-D version 2.3.25 devices with other Shure networked systems and software, see the following list of minimum versions:
- ULX-D ULXD1/2/6/8 Transmitters and ULXD4/4D/4Q Receivers 2.3.25
- SBC250/450/850 Networked Charging Stations 2.4.9
- QLX-D QLXD1/2 Transmitters and QLXD4 Receivers 2.3.24
- PSM1000 1.7.10
- Axient AXT600 Spectrum Manager 2.1.31
- Wireless Workbench 6.14.0
- Shure Update Utility 2.5.1
- ShurePlus Channels 1.4.5
Strona 71 z 155