Archiwum oprogramowania i firmware

Device Support 

• Axient® Digital wireless microphone system
• Axient® wireless microphone system
• ULX-D® digital wireless microphone system
• QLX-D® digital wireless microphone system
• SLX-D digital wireless microphone system
• PSM®1000 wireless in-ear monitor system
• UHF-R/MW wireless microphone system

Known Issues 

• When an Axient Digital receiver mode is changed from different modes (transmission modes, or Quadversity mode, or frequency diversity mode) the application may crash.
• The application may crash when it is brought to the foreground from the background by using the application icon on the home screen.
• The application may crash in certain scenarios on an Android 9 OS device.
• The application may crash if it continues to run while open for over one hour.
• ULXD4Q receivers’ audio LEDs in the application do not match the hardware’s front panel LEDs during audio overloads while in audio summing modes.
• ULXD6/ULXD8 battery bars are not displaying in the list view while using AA batteries.
• In certain scenarios, the Access Control “Enter PIN” dialog does not get dismissed.
• On firmware version 1.0.13 for SLX-D transmitters, battery type may not persist between power cycles. To resolve, set the battery type again on the transmitter.

Notes 

• User Guide
• Compatible with Android 9.0 and later. We can’t ensure compatibility or full feature functionality with older operating systems.
• Compatible with most Android phones from Samsung, Google, OnePlus, Motorola, and more.
• Please report problems and submit general feedback through the app (Settings > Help > Report a Problem/General Feedback). This will open your default email application where you can add details about the issue you are experiencing. To send the email requires an active internet connection.
• An 802.11 or 802.11ac wireless router is recommended for Wi-Fi connection.
• In order to view the SSID of your network connection type or SSID in the network status bar, you must permit the app access to your location. To do so, go to the Settings app on your Android Phone select Location > App Permissions > Channels, and choose “Allow Only While Using the App”.
• Wired ethernet connection has been tested with the following adapters:
  • UGREEN Ethernet Adapter USB 2.0 to 10/100 Network RJ45 LAN Wired Adapter
  • INSIGNIA USB 3.0 to Gigabit Ethernet Adapter
  • Nonda USB-A to USB-C Adapter
• For best results, ensure your connected devices are updated to the latest firmware using the Shure Update Utility desktop app.
• To operate this version of ShurePlus Channels with other Shure products, reference the following list of minimum versions supported:
  • Axient Digital 1.3.26
  • ULX-D 2.4.25
  • QLX-D 2.4.3
  • SLX-D 1.0.13
  • PSM1000 1.7.10
  • Axient 2.1.11
  • UHF-R 1.171
  • Shure Update Utility 2.6.1
  • Wireless Workbench 6.14.1

New Features

• Hardware EQ – change EQ settings and save directly to your supported Shure headphones or earphones
• Support for new AONIC TW2
• Button Customization
• How-to Videos – learn how to use your device

Improvements

• User interface improvements
• Bug fixes

Known Issues

• For devices utilizing Android OS 9, after navigating to “Settings” during playback, music tracks will pause.
  • Resolution: Navigate to “Allow Background Activity” and enable the setting.

Notes

• User Guide
• AONIC TW2 User Guide
• AONIC 50 User Guide
• Compatible with Android 8.0 and higher. We can’t ensure compatibility or full feature functionality with older operating systems. Please report problems and submit general feedback through the app (Settings > Feedback)

New Features

• Hardware EQ – change EQ settings and save directly to your supported Shure headphones or earphones
• Support for new AONIC TW2
• Button Customization
• How-to Videos – learn how to use your device

Improvements

• User interface improvements
• Bug fixes

Known Issues

• The app can play files that are stored on the device’s music library. To enable this, go to the iOS Settings app, select PLAY from the list of apps, and turn on the “Allow PLAY to access Media & Apple Music” setting.
• The app only plays files that are stored locally on the device. Some tracks that are stored in the cloud may appear grayed out in the app, but they cannot be played.

Notes

• User Guide
• AONIC TW2 User Guide
• AONIC 50 User Guide
• Supports iPhone 6S and later – iPad and iPod Touch are not supported.
• Compatible with iOS 13.0 or later. We can’t ensure compatibility or full feature functionality with older operating systems. Please report problems and submit general feedback through the app (Settings > Feedback).

Improvements

• User interface improvements
• Music player improvements
  • Improved play queue
  • Recently deleted/added sort option
  • Shuffle improvements
• Bug fixes

Known Issues

• For devices utilizing Android OS 9, after navigating to “Settings” during playback, music tracks will pause.
  • Resolution: Navigate to “Allow Background Activity” and enable the setting.

Notes

• User Guide
• Compatible with Android 8.0 and higher. We can’t ensure compatibility or full feature functionality with older operating systems. Please report problems and submit general feedback through the app (Settings > Feedback)

Improvements

• User interface improvements
• Bug fixes

Known Issues

• The app can play files that are stored on the device’s music library. To enable this, go to the iOS Settings app, select PLAY from the list of apps, and turn on the “Allow PLAY to access Media & Apple Music” setting.
• The app only plays files that are stored locally on the device. Some tracks that are stored in the cloud may appear grayed out in the app, but they cannot be played.

Notes

• User Guide
• Supports iPhone 6S and later – iPad and iPod Touch are not supported.
• Compatible with iOS 13.0 or later. We can’t ensure compatibility or full feature functionality with older operating systems. Please report problems and submit general feedback through the app (Settings > Feedback).

Improvements

• Bug fixes

Known Issues

• The FPS and resolution combinations available for selection will vary based on the user’s phone.

Notes

• MV88+ User Guide
• Frequently Asked Questions
• Compatible with Android 8.0 and higher
• NOTE FOR MV88+ USERS: Learn about compatibility with your Android device at www.shure.com/MOTIVcompatibility

New Features

• Sort/Search User Recordings
• Reminder to back up recordings

Improvements

• User interface improvements
• Bug fixes

Known Issues

• A small percentage of users may receive a numerical error message while recording, such as “-1” or “66570.” These messages occur when there was an error writing to the device and are related to Apple’s new file system (APFS). One of these errors can occur even if your device has plenty of remaining storage. We recommend clearing up your device storage from the Settings screen, and if that doesn’t resolve the issues, doing a full restore from iTunes, consisting of backing up your device, wiping/restoring to factory settings, and restoring from the backup.
• If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.
• When connected to iPad Pro via a USB-C cable, the MV88+ will pass audio and gain can be adjusted. However, the MOTIV apps will only display ‘external mic’, and the settings screen will not be available. Shure recommends using another device to configure the settings before using with iPad Pro. No adjustments can be made in real time (except gain) on the Shure MOTIV apps when using an iPad Pro.

Notes

• MV7 User Guide
• MV88+ User Guide
• MV88 User Guide
• Frequently Asked Questions
• This app is compatible with iOS 13.0 or later. We can’t ensure compatibility or full feature functionality with older operating systems. Please report problems and submit general feedback through the app (About > Feedback)
• Compatible with iPhone, iPad, iPod touch, and Apple Watch

Improvements

• Bug fixes

Known Issues

• The FPS and resolution combinations available for selection will vary based on the user’s phone.
• If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.

Notes

• MOTIV Video User Guide
• MV88+ Video User Guide
• MV88 User Guide
• Frequently Asked Questions
• This app is compatible with iOS 13.0 or later. We can’t ensure compatibility or full feature functionality with older operating systems. Please report problems and submit general feedback through the app (About > Feedback)
• Compatible with iPhone and Apple Watch – iPad and iPod Touch are not supported

Improvements

• Bug fixes

Known Issues

• A small percentage of users may receive a numerical error message while recording, such as “-1” or “66570.” These messages occur when there was an error writing to the device and are related to Apple’s new file system (APFS). One of these errors can occur even if your device has plenty of remaining storage. We recommend clearing up your device storage from the Settings screen, and if that doesn’t resolve the issues, doing a full restore from iTunes, consisting of backing up your device, wiping/restoring to factory settings, and restoring from the backup.
• If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.
• When connected to iPad Pro via a USB-C cable, the MV88+ will pass audio and gain can be adjusted. However, the MOTIV apps will only display ‘external mic’, and the settings screen will not be available. Shure recommends using another device to configure the settings before using with iPad Pro. No adjustments can be made in real time (except gain) on the Shure MOTIV apps when using an iPad Pro.

Notes

• MV7 User Guide
• MV88+ User Guide
• MV88 User Guide
• Frequently Asked Questions
• This app is compatible with iOS 13.0 or later. We can’t ensure compatibility or full feature functionality with older operating systems. Please report problems and submit general feedback through the app (About > Feedback)
• Compatible with iPhone, iPad, iPod touch, and Apple Watch

New Features

• Sort and search user recordings

Improvements

• Bug fixes

Notes

• User Guide
• MV7 User Guide
• MV88+ User Guide
• Frequently Asked Questions
• Compatible with Android 8.0 and higher.
• NOTE FOR MV88+ USERS: Learn about compatibility with your Android device at www.shure.com/MOTIVcompatibility.