Archiwum oprogramowania i firmware

Improvements

• Fixed distorted audio issue on ULXD4 devices with Dante version REV3
• Fixed issue where ULXD4 devices sometimes disappear from Wireless Workbench® and do not reconnect

Important

• ULXD4D and ULXD4Q receivers running firmware prior to 1.4.8 must be updated to 1.4.8 before updating to newer versions.
• ULXD4D and ULXD4Q receivers running firmware between 1.4.8 and 2.0.28 must be updated to 2.0.28 before updating to newer versions.
• After 2.0.28 is installed, ULXD4D and ULXD4Q receivers can be updated to the latest available firmware version.
• ULX-D devices that are downgrading to 1.5.6 may report a false failure.
  • Workaround: Because this is a false failure, closing the send updates window and going to the main page, Shure Update Utility will show green for the firmware version.
• ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Known Issues

• Group Scan Deployment and Custom Group Load may not work with other ULXD4/ULXD4D/ ULXD4Q that are running older firmware versions

Notes

• User Guide
• ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
  1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
  2. Align the infrared ports with the transmitter
  3. Press ENTER
• To operate this version of ULX-D devices with other Shure networked systems and software, see the following list of recommended versions:
  • ULXD1/2/6/8 Transmitters 2.7.3
  • ULXD4/4D/4Q Receivers 2.7.6
  • Axient AXT600 Spectrum Manager 2.1.41
  • SBC250/450/850 Networked Charging Stations 2.7.3
  • Shure Update Utility 2.8.0
  • ShurePlus Channels iOS 1.6.0
  • ShurePlus Channels Android 1.6.0
  • Wireless Workbench 6.15.3

Improvements

• Fixed distorted audio issue on ULXD4 devices with Dante version REV3
• Fixed issue where ULXD4 devices sometimes disappear from Wireless Workbench® and do not reconnect

Important

• ULXD4D and ULXD4Q receivers running firmware prior to 1.4.8 must be updated to 1.4.8 before updating to newer versions.
• ULXD4D and ULXD4Q receivers running firmware between 1.4.8 and 2.0.28 must be updated to 2.0.28 before updating to newer versions.
• After 2.0.28 is installed, ULXD4D and ULXD4Q receivers can be updated to the latest available firmware version.
• ULX-D devices that are downgrading to 1.5.6 may report a false failure.
  • Workaround: Because this is a false failure, closing the send updates window and going to the main page, Shure Update Utility will show green for the firmware version.
• ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Known Issues

• Group Scan Deployment and Custom Group Load may not work with other ULXD4/ULXD4D/ ULXD4Q that are running older firmware versions

Notes

• User Guide
• ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
  1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
  2. Align the infrared ports with the transmitter
  3. Press ENTER
• To operate this version of ULX-D devices with other Shure networked systems and software, see the following list of recommended versions:
  • ULXD1/2/6/8 Transmitters 2.7.3
  • ULXD4/4D/4Q Receivers 2.7.6
  • Axient AXT600 Spectrum Manager 2.1.41
  • SBC250/450/850 Networked Charging Stations 2.7.3
  • Shure Update Utility 2.8.0
  • ShurePlus Channels iOS 1.6.0
  • ShurePlus Channels Android 1.6.0
  • Wireless Workbench 6.15.3

Improvements

• General improvements

Known Issues

• Transmitter firmware update will fail if the transmitter Power = OFF (standby)
  • Workaround: Set transmitter Power = ON before performing the firmware update

Notes

• This firmware is compatible with Q5X AquaMic™, CoachMic™, and PlayerMic®
• To install Q5X firmware on devices:
  1. Download Q5X 1.2.56 firmware from Shure Update Utility (user guide)
  2. Connect to the AD4D, AD4Q, or ADX5D receiver, and in the Hosted Tx section, select Q5XTx 1.2.56
  3. Send the update to the receiver
  4. Use IR Sync to update the transmitter firmware
• AD4D and AD4Q can only host one transmitter firmware image at a time; if you also need to update Axient Digital transmitters, please repeat the above process, but select an ADTx firmware version.
• To operate this version of Q5X AquaMic™, CoachMic™, and PlayerMic® with other Shure systems and software, see the following list of recommended versions:
  • AD4D/Q 1.4.7
  • ADX5D 1.4.7
  • Shure Update Utility 2.7.2
• Distributed by Shure, AquaMic™, CoachMic™, and PlayerMic® and MicCommander™ are Q5X products. For support and service, please visit www.q5x.com.

Recommendation

• Update all QLX-D devices in a configuration to the same firmware version.

Important

• QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

• Support for added hardware revisions

Notes

• To operate QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on version 2.X firmware or later.
• To operate this version of QLX-D devices with other Shure networked systems and software, see the following list of recommended versions:
  • AXT600 Axient Spectrum Manager 2.1.41
  • PSM1000 P10T Transmitters 1.3.6
  • ULX-D 2.7.3
  • Wireless Workbench 6.15.2
  • Shure Update Utility 2.7.2
  • ShurePlus Channels iOS 1.5.2
  • ShurePlus Channels Android 1.1.1

Recommendation

• Update all QLX-D devices in a configuration to the same firmware version.

Important

• QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

• Support for added hardware revisions

Notes

• To operate QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on version 2.X firmware or later.
• To operate this version of QLX-D devices with other Shure networked systems and software, see the following list of recommended versions:
  • AXT600 Axient Spectrum Manager 2.1.41
  • PSM1000 P10T Transmitters 1.3.6
  • ULX-D 2.7.3
  • Wireless Workbench 6.15.2
  • Shure Update Utility 2.7.2
  • ShurePlus Channels iOS 1.5.2
  • ShurePlus Channels Android 1.1.1

Recommendation

• Update all QLX-D devices in a configuration to the same firmware version.

Important

• QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

• Support for added hardware revisions

Notes

• To operate QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on version 2.X firmware or later.
• To operate this version of QLX-D devices with other Shure networked systems and software, see the following list of recommended versions:
  • AXT600 Axient Spectrum Manager 2.1.41
  • PSM1000 P10T Transmitters 1.3.6
  • ULX-D 2.7.3
  • Wireless Workbench 6.15.2
  • Shure Update Utility 2.7.2
  • ShurePlus Channels iOS 1.5.2
  • ShurePlus Channels Android 1.1.1

Recommendation

• Update all QLX-D devices in a configuration to the same firmware version.

Important

• QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

• Support for added hardware revisions

Notes

• To operate QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on version 2.X firmware or later.
• To operate this version of QLX-D devices with other Shure networked systems and software, see the following list of recommended versions:
  • AXT600 Axient Spectrum Manager 2.1.41
  • PSM1000 P10T Transmitters 1.3.6
  • ULX-D 2.7.3
  • Wireless Workbench 6.15.2
  • Shure Update Utility 2.7.2
  • ShurePlus Channels iOS 1.5.2
  • ShurePlus Channels Android 1.1.1

Recommendation

• Update all QLX-D devices in a configuration to the same firmware version.

Important

• QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

• Support for added hardware revisions

Notes

• To operate QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on version 2.X firmware or later.
• To operate this version of QLX-D devices with other Shure networked systems and software, see the following list of recommended versions:
  • AXT600 Axient Spectrum Manager 2.1.41
  • PSM1000 P10T Transmitters 1.3.6
  • ULX-D 2.7.3
  • Wireless Workbench 6.15.2
  • Shure Update Utility 2.7.2
  • ShurePlus Channels iOS 1.5.2
  • ShurePlus Channels Android 1.1.1

Recommendation

• Update all QLX-D devices in a configuration to the same firmware version.

Important

• QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Improvements

• Support for added hardware revisions

Notes

• To operate QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on version 2.X firmware or later.
• To operate this version of QLX-D devices with other Shure networked systems and software, see the following list of recommended versions:
  • AXT600 Axient Spectrum Manager 2.1.41
  • PSM1000 P10T Transmitters 1.3.6
  • ULX-D 2.7.3
  • Wireless Workbench 6.15.2
  • Shure Update Utility 2.7.2
  • ShurePlus Channels iOS 1.5.2
  • ShurePlus Channels Android 1.1.1

Improvements

• Adjusted bootup sound volume

Notes

• Stem Ecosystem Firmware Updates - FAQ