Archiwum oprogramowania i firmware

Improvements

• Fixed an issue where more scan exclusion peaks were detected than in Wireless Workbench
• General bug fixes

Notes

• User Guide
• To operate this version of AD600 with other Shure systems and software, see the following list of minimum versions: 
  • Axient Digital AD1/2, ADX1/1M/2/2FD and AD3 Transmitters 1.4.7
  • Axient Digital AD4D/Q Receivers 1.4.7
  • Axient Digital AD610 Diversity ShowLink® Access Point 1.4.7
  • Shure Update Utility 2.7.2 
  • ShurePlus Channels iOS 1.5.2 
  • ShurePlus Channels Android 1.1.1 
  • Wireless Workbench 6.15.2

Improvements

• Added support for time zone 5.5 for India and other countries
• Removed software infrastructure to support the Google Play store
• Updated discovery for Stem devices

Notes

• Stem Ecosystem Firmware Updates - FAQ

Notes

• User Guide
• To operate this version of SBC840M with other Shure devices and software, see the following list of recommended versions:
  • Shure Update Utility 2.7.2
  • Wireless Workbench 6.15.2

 Notes

• User Guide
• To operate this version of SBC840 with other Shure devices and software, see the following list of recommended versions:
  • Shure Update Utility 2.7.2
  • Wireless Workbench 6.15.2

Notes

• User Guides: SBC220 | SBC240
• To operate this version of SBC220 or SBC240 with other Shure devices and software, see the following list of recommended versions:
  • Shure Update Utility 2.7.2
  • Wireless Workbench 6.15.2

Notes

• User Guide
• To operate this version of AD610 with other Shure systems and software, see the following list of recommended versions:
  • Axient Digital AD1/2, ADX1/1M/2/2FD and AD3 Transmitters 1.4.7
  • Axient Digital AD4D/Q Receivers 1.4.7
  • Axient AXT400 Receiver 2.1.11 (REV1 AD610 only)
  • Axient AXT100/200 2.1.11 (REV1 AD610 only)
  • ShurePlus Channels iOS 1.5.2
  • ShurePlus Channels Android 1.1.1
  • Shure Update Utility 2.7.2
  • Wireless Workbench 6.15.2

Improvements

• Implemented a feature to hide the on-screen clock when the system is not able to display the correct time (i.e. does not have internet connection)
• Added support for time zone 5.5 for India and other countries
• Fixed an issue with the Heatmap not displaying correctly

Notes

• Stem Ecosystem Firmware Updates - FAQ

Improvements

• API to enable control and monitoring of Stem devices via third-party control systems
• Further Speaker sound improvements
• Further (significant) Ceiling sound improvements
• Added support for time zone 5.5 for India and other countries
• Fixed an issue with the Heatmap toggle not working

Notes

• Stem Ecosystem Firmware Updates - FAQ

Improvements

• Improved talker position accuracy by using a control string command ARRAY_HEIGHT_OVERRIDE to specify the Array Height
• Improved talker position sensitivity when the talker is not facing the array

Known Issues

• The optional ARRAY_HEIGHT_OVERRIDE value sent via command strings must be resent upon power cycle.
• If the ARRAY_HEIGHT_OVERRIDE command is used to set a height that is outside the valid range (122-914 cm), the command will not display an error but internally, the value will be rejected from being set.
• Acoustic reflections from tables can sometimes be mistaken by the MXA920 as another source/talker location.  The symptom is a second talker location coordinate set in front of and higher than the actual talker.
  • Workaround:  Place Coverage Areas to minimize pick-up of table surface reflections.
• Channel Names are not set in the initial attempt of ‘push-to-Dante’. Dante interface resets when Device Name is set.
  • Workaround: Channel Names are set on the 2nd attempt.
• MXA920 LED does not stay on after a reboot if the light settings are set to Unmute = Blue, Mute = Red.  Other light combinations work as expected after reboot.
• When a muted dynamic coverage area is moved when a dedicated coverage area has also been established, the mix output of the MXA920 has low-level audio from outside the dedicated coverage area limits.
  • Workaround: Unmute and Mute the dynamic coverage area after a dynamic coverage area is moved.

Notes

• User Guide
• Command Strings
• Note that Talker Position Events are published for talkers in a coverage area regardless of the mute status of the coverage area.  To fully inform camera switching decision logic, subscribe to the Coverage Area Mute Status. See https://pubs.shure.com/command-strings for further information
• To operate this version of MXA920 with Dante Controller, reference the following minimum versions:
  • v3.10.2.4 (Windows)
  • v3.10.2.3 (Mac OS X)
• To operate this version of MXA920 with Shure software or other Shure networked systems, reference the following list of recommended versions supported:
  • Designer 4.7.5
  • IntelliMix Room 4.0.0
  • ANI22/ANI4IN/ANI4OUT 4.7.6
  • ANIUSB-MATRIX 4.7.17
  • MXA310 4.7.8
  • MXA710 1.5.16
  • MXA910 4.7.13
  • MXN5-C 1.5.12
  • MXA-MUTE 1.5.16
  • P300 4.7.17
  • Shure Update Utility 2.7.2
  • Shure Web Device Discovery 1.2.17

Improvements

• Improved talker position accuracy by using a control string command ARRAY_HEIGHT_OVERRIDE to specify the Array Height
• Improved talker position sensitivity when the talker is not facing the array

Known Issues

• The optional ARRAY_HEIGHT_OVERRIDE value sent via command strings must be resent upon power cycle.
• If the ARRAY_HEIGHT_OVERRIDE command is used to set a height that is outside the valid range (122-914 cm), the command will not display an error but internally, the value will be rejected from being set.
• Acoustic reflections from tables can sometimes be mistaken by the MXA920 as another source/talker location.  The symptom is a second talker location coordinate set in front of and higher than the actual talker.
  • Workaround:  Place Coverage Areas to minimize pick-up of table surface reflections.
• Channel Names are not set in the initial attempt of ‘push-to-Dante’. Dante interface resets when Device Name is set.
  • Workaround: Channel Names are set on the 2nd attempt.
• MXA920 LED does not stay on after a reboot if the light settings are set to Unmute = Blue, Mute = Red.  Other light combinations work as expected after reboot.
• When a muted dynamic coverage area is moved when a dedicated coverage area has also been established, the mix output of the MXA920 has low-level audio from outside the dedicated coverage area limits.
  • Workaround: Unmute and Mute the dynamic coverage area after a dynamic coverage area is moved.

Notes

• User Guide
• Command Strings
• Note that Talker Position Events are published for talkers in a coverage area regardless of the mute status of the coverage area.  To fully inform camera switching decision logic, subscribe to the Coverage Area Mute Status. See https://pubs.shure.com/command-strings for further information
• To operate this version of MXA920 with Dante Controller, reference the following minimum versions:
  • v3.10.2.4 (Windows)
  • v3.10.2.3 (Mac OS X)
• To operate this version of MXA920 with Shure software or other Shure networked systems, reference the following list of recommended versions supported:
  • Designer 4.7.5
  • IntelliMix Room 4.0.0
  • ANI22/ANI4IN/ANI4OUT 4.7.6
  • ANIUSB-MATRIX 4.7.17
  • MXA310 4.7.8
  • MXA710 1.5.16
  • MXA910 4.7.13
  • MXN5-C 1.5.12
  • MXA-MUTE 1.5.16
  • P300 4.7.17
  • Shure Update Utility 2.7.2
  • Shure Web Device Discovery 1.2.17