Archiwum oprogramowania i firmware

These release notes cover the following models: 

• MXWAPT2/4/8 Access Point Transceivers

Important

• Update any MXW devices which are below the minimum supported firmware 8.0.3 by using the Shure Update Utility (SUU) found here.  Please note – should the firmware version used be older than 5.2.2, it is advised to upgrade to version 5.2.2 first before updating to any subsequent more recent releases. Close the SUU when complete.

Bug Fixes

• The following bug was fixed in this version: When an MXWAPT8 access point is associated with two MXWNCS8 chargers, it is not possible to link all eight MXW8 mics. APT channels 5 - 8 are not linked to any mics.

Known Issues

• Multiple Primary Leader Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet

Notes

• User Guide
• Quick Start Guide
• Crestron/AMX Control Strings
• To operate this version of MXW with other Shure networked systems, see the following list of recommended software and firmware versions:
  • SCM820 1.4.3
  • Shure Web Device Discovery 1.2.17
  • Shure Update Utility 2.7.2
  • SystemOn 4.7.2

These release notes cover the following models: 

• MXWAPT2/4/8 Access Point Transceivers

Important

• Update any MXW devices which are below the minimum supported firmware 8.0.3 by using the Shure Update Utility (SUU) found here.  Please note – should the firmware version used be older than 5.2.2, it is advised to upgrade to version 5.2.2 first before updating to any subsequent more recent releases. Close the SUU when complete.

Bug Fixes

• The following bug was fixed in this version: When an MXWAPT8 access point is associated with two MXWNCS8 chargers, it is not possible to link all eight MXW8 mics. APT channels 5 - 8 are not linked to any mics.

Known Issues

• Multiple Primary Leader Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet

Notes

• User Guide
• Quick Start Guide
• Crestron/AMX Control Strings
• To operate this version of MXW with other Shure networked systems, see the following list of recommended software and firmware versions:
  • SCM820 1.4.3
  • Shure Web Device Discovery 1.2.17
  • Shure Update Utility 2.7.2
  • SystemOn 4.7.2

These release notes cover the following models: 

• MXWAPT2/4/8 Access Point Transceivers

Important

• Update any MXW devices which are below the minimum supported firmware 8.0.3 by using the Shure Update Utility (SUU) found here.  Please note – should the firmware version used be older than 5.2.2, it is advised to upgrade to version 5.2.2 first before updating to any subsequent more recent releases. Close the SUU when complete.

Bug Fixes

• The following bug was fixed in this version: When an MXWAPT8 access point is associated with two MXWNCS8 chargers, it is not possible to link all eight MXW8 mics. APT channels 5 - 8 are not linked to any mics.

Known Issues

• Multiple Primary Leader Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet

Notes

• User Guide
• Quick Start Guide
• Crestron/AMX Control Strings
• To operate this version of MXW with other Shure networked systems, see the following list of recommended software and firmware versions:
  • SCM820 1.4.3
  • Shure Web Device Discovery 1.2.17
  • Shure Update Utility 2.7.2
  • SystemOn 4.7.2

Initial Release

Notes

• User Guide
• To operate this version of AD600 with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2, ADX1/1M/2/2FD and AD3 Transmitters 1.3.45
  • Axient Digital AD4D/Q Receivers 1.3.45
  • Axient Digital AD610 Diversity ShowLink® Access Point 1.3.45
  • Shure Update Utility 2.7.2
  • ShurePlus Channels iOS 1.5.2
  • ShurePlus Channels Android 1.1.1
  • Wireless Workbench 6.15.2

These release notes cover the following models: 

• MXWNCS2/4/8 Networked Charging Stations

Important

• Update any MXW devices which are below the minimum supported firmware 8.0.3 by using the Shure Update Utility (SUU) found here.  Please note – should the firmware version used be older than 5.2.2, it is advised to upgrade to version 5.2.2 first before updating to any subsequent more recent releases. Close the SUU when complete.

Improvements

• Support for added hardware revisions
• Bug fixes

Known Issues

• Multiple Primary Leader Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet

Notes

• User Guide
• Quick Start Guide
• Crestron/AMX Control Strings
• To operate this version of MXW with other Shure networked systems, see the following list of recommended software and firmware versions:
  • SCM820 1.4.3
  • Shure Web Device Discovery 1.2.17
  • Shure Update Utility 2.7.2
  • SystemOn 4.7.0

Important

• ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Known Issues

• Group Scan Deployment and Custom Group Load may not work with other ULXD4/ULXD4D/ ULXD4Q that are running older firmware versions

Notes

• User Guide
• ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
  1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
  2. Align the infrared ports with the transmitter
  3. Press ENTER
• To operate this version of ULX-D devices with other Shure networked systems and software, see the following list of recommended versions:
  • ULXD1/2/6/8 Transmitters and ULXD4/4D/4Q Receivers 2.7.3
  • Axient AXT600 Spectrum Manager 2.1.41
  • SBC250/450/850 Networked Charging Stations 2.7.3
  • Shure Update Utility 2.7.2
  • ShurePlus Channels iOS 1.5.2
  • ShurePlus Channels Android 1.1.1
  • Wireless Workbench 6.15.0

Important

• ULXD4D and ULXD4Q receivers running firmware prior to 1.4.8 must be updated to 1.4.8 before updating to newer versions.
• ULXD4D and ULXD4Q receivers running firmware between 1.4.8 and 2.0.28 must be updated to 2.0.28 before updating to newer versions.
• After 2.0.28 is installed, ULXD4D and ULXD4Q receivers can be updated to the latest available firmware version.
• ULX-D devices that are downgrading to 1.5.6 may report a false failure.
  • Workaround: Because this is a false failure, closing the send updates window and going to the main page, Shure Update Utility will show green for the firmware version.
• ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version. 

Known Issues

• Group Scan Deployment and Custom Group Load may not work with other ULXD4/ULXD4D/ ULXD4Q that are running older firmware versions

Notes

• User Guide
• ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
  1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
  2. Align the infrared ports with the transmitter
  3. Press ENTER
• To operate this version of ULX-D devices with other Shure networked systems and software, see the following list of recommended versions:
  • ULXD1/2/6/8 Transmitters and ULXD4/4D/4Q Receivers 2.7.3
  • Axient AXT600 Spectrum Manager 2.1.41
  • SBC250/450/850 Networked Charging Stations 2.7.3
  • Shure Update Utility 2.7.2
  • ShurePlus Channels iOS 1.5.2
  • ShurePlus Channels Android 1.1.1
  • Wireless Workbench 6.15.0

Important

• ULXD4D and ULXD4Q receivers running firmware prior to 1.4.8 must be updated to 1.4.8 before updating to newer versions.
• ULXD4D and ULXD4Q receivers running firmware between 1.4.8 and 2.0.28 must be updated to 2.0.28 before updating to newer versions.
• After 2.0.28 is installed, ULXD4D and ULXD4Q receivers can be updated to the latest available firmware version.
• ULX-D devices that are downgrading to 1.5.6 may report a false failure.
  • Workaround: Because this is a false failure, closing the send updates window and going to the main page, Shure Update Utility will show green for the firmware version.
• ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.

Known Issues

• Group Scan Deployment and Custom Group Load may not work with other ULXD4/ULXD4D/ ULXD4Q that are running older firmware versions

Notes

• User Guide
• ULXD1/2 transmitters used with receivers must be updated via IR sync. After a receiver is updated, follow these steps:
  1. Go to the receiver menu: DEVICE UTILITIES > TX FW UPDATE
  2. Align the infrared ports with the transmitter
  3. Press ENTER
• To operate this version of ULX-D devices with other Shure networked systems and software, see the following list of recommended versions:
  • ULXD1/2/6/8 Transmitters and ULXD4/4D/4Q Receivers 2.7.3
  • Axient AXT600 Spectrum Manager 2.1.41
  • SBC250/450/850 Networked Charging Stations 2.7.3
  • Shure Update Utility 2.7.2
  • ShurePlus Channels iOS 1.5.2
  • ShurePlus Channels Android 1.1.1
  • Wireless Workbench 6.15.0

Important

• ULX-D 2.X firmware versions are incompatible with ULX-D or QLX-D 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version. 

Notes

• User Guide
• To update firmware for ULXD6/8 transmitters with ULX-D or QLX-D receivers:
  1. Update receivers to the following minimum versions:
     • ULXD4, ULXD4D, and ULXD4Q Receivers 2.1.16 or higher
     • QLXD4 Receivers 2.1.5 or higher
  2. Using Shure Update Utility, download ULXD6/8 transmitter firmware to the receivers.
  3. Using the FW Update menu on a receiver, update transmitters.
• To update ULXD6/8 transmitters firmware while they are docked in an SBC250/450/850 Networked Charging Station:
  1. Place transmitters on charging station and ensure charging station is connected to the network.
  2. Launch Shure Update Utility to find firmware updates.
  3. Download updates and select Send Updates.
• To operate this version of ULXD6/8 devices with other Shure networked systems and software, see the following list of recommended versions:
  • ULXD1/2/6/8 Transmitters and ULXD4/4D/4Q Receivers 2.7.3
  • QLX-D QLXD1/2 Transmitters and QLXD4 Receivers 2.5.2 
  • SBC250/450/850 Networked Charging Stations 2.7.3
  • Shure Update Utility 2.7.2
  • ShurePlus Channels iOS 1.5.2
  • ShurePlus Channels Android 1.1.1
  • Wireless Workbench 6.15.0

Notes 

• SBC250 User Guide
• SBC450/850 User Guide
• To set up ULXD6/8 transmitters to receive firmware updates while docked in SBC250/450/850 Networked Charging Stations, follow these steps: 
  1. Place transmitters on a charging station and ensure the charging station is connected to the network. 
  2. Launch Shure Update Utility to find firmware updates. 
  3. Download updates and select Send Updates. 
• To operate this version of SBC250/450/850 with other Shure networked systems and software, see the following list of recommended versions: 
  • ULX-D ULXD6/8 Transmitters and ULXD4/4D/4Q Receivers 2.7.3
  • Shure Update Utility 2.7.2
  • Wireless Workbench 6.15.0