Archiwum oprogramowania i firmware

Important

• ULXD4D and ULXD4Q receivers running firmware prior to 1.4.8 must be updated to 1.4.8 before updating to newer versions.
• ULXD4D and ULXD4Q receivers running firmware between 1.4.8 and 2.0.28 must be updated to 2.0.28 before updating to newer versions.
• After 2.0.28 is installed, ULXD4D and ULXD4Q receivers can be updated to the latest available firmware version.
• ULX-D devices that are downgrading to 1.5.6 may report a false failure.
  • Workaround: Because this is a false failure, closing the send updates window and going to the main page, Shure Update Utility will show green for the firmware version.

Improvements

• Added ability to disable Interference Alerts
  • Default value is Interference Alert: "ON"
  • Can be disabled by navigating to Device Utilities > Advanced RF > Interference and selecting "OFF"

Notes

• For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.6.6:
  • ULX-D ULXD1/2 Transmitters and ULXD4, ULXD4D, ULXD4Q Receivers 1.5.6
  • Axient AXT400 Receivers and AXT600 Spectrum Managers 1.15.3
  • Wireless Workbench 6 version 6.10.3

Important

• ULXD4D and ULXD4Q receivers running firmware prior to 1.4.8 must be updated to 1.4.8 before updating to newer versions.
• ULXD4D and ULXD4Q receivers running firmware between 1.4.8 and 2.0.28 must be updated to 2.0.28 before updating to newer versions.
• After 2.0.28 is installed, ULXD4D and ULXD4Q receivers can be updated to the latest available firmware version.
• ULX-D devices that are downgrading to 1.5.6 may report a false failure.
  • Workaround: Because this is a false failure, closing the send updates window and going to the main page, Shure Update Utility will show green for the firmware version.

Improvements

• Added ability to disable Interference Alerts
  • Default value is Interference Alert: "ON"
  • Can be disabled by navigating to Device Utilities > Advanced RF > Interference and selecting "OFF"

Notes

• For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.6.6:
  • ULX-D ULXD1/2 Transmitters and ULXD4, ULXD4D, ULXD4Q Receivers 1.5.6
  • Axient AXT400 Receivers and AXT600 Spectrum Managers 1.15.3
  • Wireless Workbench 6 version 6.10.3

Improvements

• Added ability to disable Interference Alerts
  • Default value is Interference Alert: "ON"
  • Can be disabled by navigating to Device Utilities > Advanced RF > Interference and selecting "OFF"

Notes

• For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.6.6:
  • ULX-D ULXD1/2 Transmitters and ULXD4, ULXD4D, ULXD4Q Receivers 1.5.6
  • Axient AXT400 Receivers and AXT600 Spectrum Managers 1.15.3
  • Wireless Workbench 6 version 6.10.3

Notes

• For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.6.6:
  • ULX-D ULXD1/2 Transmitters and ULXD4, ULXD4D, ULXD4Q Receivers 1.5.6
  • Axient AXT400 Receivers and AXT600 Spectrum Managers 1.15.3
  • Wireless Workbench 6 version 6.10.3

Initial Release

Initial Release

Initial Release

Initial Release

These release notes cover the following models:

• MXWNCS4/8 Networked Chargers
• MXWANI4/8 Audio Network Interfaces
• MXWAPT4/8 Access Point Transceivers
• MXW1/2/6/8 Wireless Microphones

NEW FEATURES

• Lock Configuration – Enables more MXW devices to operate on the same subnet. When a configuration is locked it reduces overall network communication with devices outside of the configuration. This reduction in network traffic dramatically increases the overall number of MXW devices that can coexist on the same subnet. It is recommended that all users lock their configurations after setup to optimize system performance.

IMPROVEMENTS

• Fixed Spectrum Scanner display bug introduced in 2.0.5. Current scan results are now shown immediately.
• Stability improvements for Audio Network Interfaces.

NOTES

• For operation of MXW devices with other Shure networked systems, see the following list of minimum software and firmware versions that are supported with MXW version 3.0.2:
  • SCM820-DAN 1.1.21
  • Shure Web Device Discovery 1.0.15
  • Shure Update Utility 2.1.1

These release notes cover the following models:

• MXWNCS4/8 Networked Chargers
• MXWANI4/8 Audio Network Interfaces
• MXWAPT4/8 Access Point Transceivers
• MXW1/2/6/8 Wireless Microphones

NEW FEATURES

• Lock Configuration – Enables more MXW devices to operate on the same subnet. When a configuration is locked it reduces overall network communication with devices outside of the configuration. This reduction in network traffic dramatically increases the overall number of MXW devices that can coexist on the same subnet. It is recommended that all users lock their configurations after setup to optimize system performance.

IMPROVEMENTS

• Fixed Spectrum Scanner display bug introduced in 2.0.5. Current scan results are now shown immediately.
• Stability improvements for Audio Network Interfaces.

NOTES

• For operation of MXW devices with other Shure networked systems, see the following list of minimum software and firmware versions that are supported with MXW version 3.0.2:
  • SCM820-DAN 1.1.21
  • Shure Web Device Discovery 1.0.15
  • Shure Update Utility 2.1.1