Software & Firmware Archives

These release notes cover the following models:

• MXWNCS2/4/8 Networked Charging Stations
• MXWANI4/8 Audio Network Interfaces
• MXWAPT2/4/8 Access Point Transceivers
• MXW1/2/6/8 Wireless Microphones

Related Links

• Crestron/AMX Control Strings
• Quick Start Guide
• User Guide

Improvements

• DDM Support: This release will add support for Audinate’s Dante Domain Manager (DDM) to the MXWAPT2/4/8. Please see updated user manuals for details on operating MXWAPTs within DDM controlled audio networks. Notes:
  1. This release will NOT add support for DDM to the MXWANI4/8.
  2. If Dante Pin Lock is enabled within the DDM interface, local changes to the APT (via the web based MXW user interface or “Web-GUI”) will not be permitted
  3. If Dante Pin Lock is enabled the Device Reset Button on the APT will be disabled
• Improvements of spectrum-scan algorithm: Spectrum Scans (across all DECT RF-Bands, including J-DECT, UPCS etc.) carried out on a locally installed APT via the Web-GUI will now result in a more accurate statement of how many microphone channels are available in the scanned location.
• Security Improvement: Before an MXW device is permitted to carry out a factory-reset, the administrator password needs to be entered into the user interface.

Bug Fixes

• APT Web-GUI: Microphones with older firmware are not shown in the web-GUI - FIXED

Known Issue

• Multiple Grand Master Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
• Repetitive opening and closing of the TPCI port (2202), in excess of 250K cycles, causes TPCI port to no longer respond.

Notes

• To operate MXW version 9.0.4 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SCM820 1.3.3
  • Shure Web Device Discovery 1.2.9
  • Shure Update Utility 2.4.8
  • SystemOn 3.2

These release notes cover the following models:

• MXWNCS2/4/8 Networked Charging Stations
• MXWANI4/8 Audio Network Interfaces
• MXWAPT2/4/8 Access Point Transceivers
• MXW1/2/6/8 Wireless Microphones

Related Links

• Crestron/AMX Control Strings
• Quick Start Guide
• User Guide

Improvements

• DDM Support: This release will add support for Audinate’s Dante Domain Manager (DDM) to the MXWAPT2/4/8. Please see updated user manuals for details on operating MXWAPTs within DDM controlled audio networks. Notes:
  1. This release will NOT add support for DDM to the MXWANI4/8.
  2. If Dante Pin Lock is enabled within the DDM interface, local changes to the APT (via the web based MXW user interface or “Web-GUI”) will not be permitted
  3. If Dante Pin Lock is enabled the Device Reset Button on the APT will be disabled
• Improvements of spectrum-scan algorithm: Spectrum Scans (across all DECT RF-Bands, including J-DECT, UPCS etc.) carried out on a locally installed APT via the Web-GUI will now result in a more accurate statement of how many microphone channels are available in the scanned location.
• Security Improvement: Before an MXW device is permitted to carry out a factory-reset, the administrator password needs to be entered into the user interface.

Bug Fixes

• APT Web-GUI: Microphones with older firmware are not shown in the web-GUI - FIXED

Known Issue

• Multiple Grand Master Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
• Repetitive opening and closing of the TPCI port (2202), in excess of 250K cycles, causes TPCI port to no longer respond.

Notes

• To operate MXW version 9.0.4 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SCM820 1.3.3
  • Shure Web Device Discovery 1.2.9
  • Shure Update Utility 2.4.8
  • SystemOn 3.2

New Features

• Added device clock to home page
• Added ability to disable automatic firmware updates

Improvements

• Bug fixes

New Features

• Added device clock to home page
• Added ability to disable automatic firmware updates

Improvements

• Bug fixes

Improvements

• Bug fixes

Notes

• User Guide
• Compatible with Android 8.0 and higher. We can’t ensure compatibility or full feature functionality with older operating systems. Please report problems and submit general feedback through the app (Settings > Feedback)

Improvements

• Support for G56 AD3 band variants for Indonesia and Vietnam
• Support for G55 and K53 AD3 band variants for Brazil

Notes

• User Guides: AD1 | AD2 | ADX1 | ADX1M | ADX2 | ADX2FD
• We recommend updating all devices used together to the same firmware version.
• To operate AD1/2 and ADX1/1M/2 version 1.2.83 devices with other Shure systems and software, see the following list of minimum versions:
• Axient Digital AD1/2 and ADX1/1M/2 Transmitters 1.2.83
• Axient Digital AD4D/Q Receivers 1.2.83
• Axient AXT600 Spectrum Manager 2.1.31
• SBC240/840/840M Chargers 1.2.73
• SBRC Shure Battery Rack Charger 1.1.5
• Shure Update Utility 2.4.8
• ShurePlus Channels 1.4.2
• Wireless Workbench 6.13.3

Improvements

• Added support for new RF bands

Bug Fixes

• Fixed issues with Axient Digital-enabled Q5X wireless transmitters:
  • Fixed an issue with the battery display
  • Fixed an issue where AD4 receivers incorrectly reported mute status
  • Fixed an issue where transmitters status is shown as “Ready” for firmware update when on Standby mode
  • Fixed an issue where the transmitter fails to sync while loading custom groups

Notes

• User Guide
• Command Strings
• We recommend updating all devices used together to the same firmware version.
• To operate AD4D version 1.2.83 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 and ADX1/1M/2 Transmitters 1.2.83
  • Axient Digital AD4D/Q Receivers 1.2.83
  • Axient AXT600 Spectrum Manager 2.1.31
  • SBRC Shure Battery Rack Charger 1.1.5
  • Shure Update Utility 2.4.8
  • ShurePlus Channels 1.4.2
  • Wireless Workbench 6.13.3

Improvements

• Added support for new RF bands

Bug Fixes

• Fixed issues with Axient Digital-enabled Q5X wireless transmitters:
• Fixed an issue with the battery display
• Fixed an issue where AD4 receivers incorrectly reported mute status
• Fixed an issue where transmitters status is shown as “Ready” for firmware update when on Standby mode
• Fixed an issue where the transmitter fails to sync while loading custom groups

Notes

• User Guide
• Command Strings
• We recommend updating all devices used together to the same firmware version.
• To operate AD4Q version 1.2.83 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 and ADX1/1M/2 Transmitters 1.2.83
  • Axient Digital AD4D/Q Receivers 1.2.83
  • Axient AXT600 Spectrum Manager 2.1.31
  • SBRC Shure Battery Rack Charger 1.1.5
  • Shure Update Utility 2.4.8
  • ShurePlus Channels 1.4.2
  • Wireless Workbench 6.13.3

Important

• This software version is used for new SW6000 installations or to update all previous SW6000 installed versions using DIS-CCU Central Unit (CU 6005, CU 6010, CU 6011. CU 6105, CU 6110 and CU 5905 is not supported)
• This version is compatible with SW6000 Software License file v1.7 only
• No new SW6000 license is needed if updating from SW6000 v6.0.xxx or later versions
• A new SW6000 license is needed if updating from SW6000 v5.8.xxx or previous versions

New Features

• No new features are introduced in this version. Please refer to the release notes for version 9.0.12 for details about new features in version 9.0

Bug Fixes

• CDA
  • Individual voting results are shown in the CDA when secret voting is selected
  • Customer-inserted Mimic icons in voting configuration are switched
• CUA
  • When a secret vote is performed on the CUA, it is not indicated in the buttons that a vote has been cast
  • The 'Cancel' voting button is not available even if it is configured in voting config

Notes

• To operate MXC devices with SW6000 version 9.0, see the following list of minimum software and firmware versions:
  • MXC firmware release 9.0

Improvements

• Bug fix for an issue where the app crashes if any previously recorded audio has a single quote in the name

Notes

• User Guide
• MV88+ User Guide
• Compatible with Android 8.0 and higher.
• NOTE FOR MV88+ USERS: Learn about compatibility with your Android device at www.shure.com/MOTIVcompatibility.