Software & Firmware Archives

New Features

• Remotely link primary or secondary Microflex Wireless microphones (requires MXW version 5.1.23 or higher)
• Inventory Summary information on homepage
• Transmitter list shows battery health and linked device information

Improvements

• Added compatibility for ULX-D ULXD1/2/4/4D/4Q version 2.1.16
• Added compatibility for Microflex Wireless version 5.1.23
• Microflex Wireless meters show audio/RF activity (requires MXW devices version 5.1.23 or higher)
• Performance enhancements

Known Issues

• Discovering MXW microphones may take more than 1 minute
• Metering quality for a single location with greater than 32 devices
• UTC time and date are displayed on Event Log and Email/SMS notifications.
• Navigating through an Event Log with hundreds of events may be slow or could cause the system to time out.
• For non-English users setting up SMS notifications, the Senders Phone Number field doesn’t show the required (*), but the field is required.
• If a valid license activation ID is applied and fails on the first attempt, retry a second time before calling support.

Notes

• To operate SystemOn 3.0 with Shure networked systems, see the following list of supported firmware versions:
  • SCM820 1.3.3
  • ULX-D 1.7.34 - 2.1.16
  • MXW 4.0.6 - 5.1.23
• Please report SystemOn performance issues on any browser to Shure Support.
• For help and troubleshooting, go to the SystemOn User Guide or FAQs

Improvements

• iOS 11 compatibility
• Bug fixes

Known Issues

• There may be isolated incidents where the app freezes or loses connection to the microphone in iOS 11, especially if you leave the app or lock your phone with the mic connected, then reopen it. If this happens, force-close the app and unplug and re-plug the microphone.
• If you switch to another app by double-tapping the home button, your mic gain may change. We recommend switching between apps by single-tapping the home button and then opening the other app.
• We advise against using Apple AirPods Bluetooth headphones to monitor recordings, as this can lead to changes in mic gain or unwanted noise on the recording.

Notes

• Frequently Asked Questions
• MV88 User Guide
• This app is compatible with iOS 10.0 or later. Compatible with iPhone, iPad, and iPod touch.

New Feature

• Initial firmware for ANIUSB-MATRIX

Notes

• To operate ANIUSB-MATRIX version 2.0.11 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate ANIUSB-MATRIX version 2.0.11 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI4IN 2.0.7
  • ANI4OUT 2.0.8
  • MXA310 2.0.7
  • MXA910 2.0.8
  • Microflex Wireless 5.1.23
  • SCM820 1.3.3
  • Shure Update Utility 2.4
  • Shure Web Device Discovery 1.1

New Features

• Initial firmware for ANI22

Notes

• To operate ANI22 version 2.0.11 with Dante Controller, reference the following minimum versions: v3.10.2.4 (Windows) and v3.10.2.3 (Mac OS X)
• To operate ANI22 version 2.0.11 with other Shure networked systems, reference the following list of minimum versions supported:
  • ANI4IN 2.0.7
  • ANI4OUT 2.0.8
  • MXA310 2.0.7
  • MXA910 2.0.8
  • Microflex Wireless 5.1.23
  • SCM820 1.3.3
  • Shure Update Utility 2.4
  • Shure Web Device Discovery 1.1

*****
UPDATE: June 20, 2018: Designer 3.0 is compatible with MXA910 version 3.0.24
*****

Release Date: 8/11/2017

Initial release

Known Issues

• When importing a Designer preset file into the MXA910 web application, attempts to immediately export that file out of the web application will fail if it's not first loaded and saved to the MXA910
• When importing a Designer preset file into the MXA910 web application using MXA910 release 2.0.8 and earlier, attempts to use the low shelf filter after rebooting the device will fail if the preset file was not saved to one of the preset slots

Notes

• Internet access is required during the installation process
• Designer User Guide
• System Requirements
• Designer 3.0 is compatible with MXA910 version 1.1.3–2.0.19

Improvements

• Support for Axient® Digital with AD Series transmitters
• Bug fixes and performance enhancements

Notes

• Monitors and controls Axient® Digital, Axient®, UHF-R®, ULX-D® Digital and QLX-D® Digital, and PSM®1000 wireless systems
• Compatible with iPhone, iPad, and iPod touch running iOS 9 – 10
• A Wi-Fi connection to the networked Shure wireless systems is required
• An 802.11n or 802.11ac wireless router is recommended
• For best results update the Shure wireless system’s firmware using the Shure Update Utility.
• ShurePlus Channels Wifi Guidlines

Important

• This version applies to AD1 and AD2 transmitters

Initial Release

Notes

• To operate AD1 and AD2 version 1.0.17 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 Transmitters 1.0.17
  • Axient Digital AD4D/Q Receivers 1.0.17
  • Axient AXT600 Spectrum Manager 2.0.27
  • SBRC Shure Battery Rack Charger 1.0.1
  • Shure Update Utility 2.4
  • ShurePlus Channels 1.4
  • Wireless Workbench 6.12.2

Improvements

• Added support for updating the following devices:
  • AD and ADX Transmitters
  • AD4D Two-Channel Receiver
  • AD4Q Four-Channel Receiver
  • AD610 Diversity ShowLink Access Point
  • ULXD6/8 Transmitters
  • SBC240/450/840/840M/850 Networked Charging Stations
• Added support for the following new frequency band:
  • QLX-D G62

Known Issues

• Attempts to download ULXD6/8 transmitter firmware to a ULX-D or QLX-D receiver that is not at the minimum firmware version will fail. To update firmware for ULXD6/8 transmitters with ULX-D or QLX-D receivers:
  1. Update receivers to the following minimum versions:
     • ULXD4, ULXD4D, ULXD4Q Receivers 2.1.16
     • QLXD4 Receivers 2.1.5
  2. Using Shure Update Utility, download ULXD6/8 transmitter firmware to the receivers.
  3. Using the FW Update menu on a receiver, update transmitters.
• Microflex Wireless devices running version 1.X firmware must first be updated to version 2.0.5 before being updated to version 3.X or later.

Notes

• Shure Update Utility (SUU) version 2.4 requires 64-bit operating systems. To install SUU on a 32-bit computer, download version 2.2.2: Windows 7, 8, 10 or Mac OS X 10.9 – 10.11
• Installing Shure Update Utility on Windows will also prompt the installation of a USB driver, which must be installed to support updating USB devices, like GLX-D.
• KSE1500, SHA900 and GLX-D (USB 2.0 connected devices) must be updated one at a time.
• USB hubs are not recommended when updating USB 2.0 connected devices. Always connect these devices directly to a USB terminal of the computer running Shure Update Utility.
• Shure Update Utility 2.4 is compatible with Wireless Workbench 6.12.2 or later.

New Feature

• Initial release

Notes

• To operate AD4Q version 1.0.17 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 Transmitters 1.0.17
  • Axient Digital AD4D/Q Receivers 1.0.17
  • Axient AXT600 Spectrum Manager 2.0.X
  • SBRC Shure Battery Rack Charger 1.0.1
  • Shure Update Utility 2.4
  • ShurePlus Channels 1.4
  • Wireless Workbench 6.12.2

New Feature

• Initial release

Notes

• To operate AD4D version 1.0.17 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 Transmitters 1.0.17
  • Axient Digital AD4D/Q Receivers 1.0.17
  • Axient AXT600 Spectrum Manager 2.0.X
  • SBRC Shure Battery Rack Charger 1.0.1
  • Shure Update Utility 2.4
  • ShurePlus Channels 1.4
  • Wireless Workbench 6.12.2