सॉफ्टवेयर और फर्मवेयर अभिलेखागार

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.15.3:
  • UR4 UHF-R receiver 1.171
  • UR3 Plug-on Transmitter 1.0.0.16
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4x ULX-D Receivers 1.5.6
  • QLXD4 QLX-D Receiver 1.0.13
  • P10T PSM1000 Transmitter 1.3.9
  • Wireless Workbench 6.10.0

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.15.3:
  • UR4 UHF-R receiver 1.171
  • UR3 Plug-on Transmitter 1.0.0.16
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4x ULX-D Receivers 1.5.6
  • QLXD4 QLX-D Receiver 1.0.13
  • P10T PSM1000 Transmitter 1.3.9
  • Wireless Workbench 6.10.0

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.15.3:
  • UR4 UHF-R receiver 1.171
  • UR3 Plug-on Transmitter 1.0.0.16
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4x ULX-D Receivers 1.5.6
  • QLXD4 QLX-D Receiver 1.0.13
  • P10T PSM1000 Transmitter 1.3.9
  • Wireless Workbench 6.10.0

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.15.3:
  • UR4 UHF-R receiver 1.171
  • UR3 Plug-on Transmitter 1.0.0.16
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4x ULX-D Receivers 1.5.6
  • QLXD4 QLX-D Receiver 1.0.13
  • P10T PSM1000 Transmitter 1.3.9
  • Wireless Workbench 6.10.0

IMPROVEMENTS

• Supports updated group & channel maps for bands: G19, H18, J12, and L20
• Supports P10T frequency bands: G10J, J8J, L11J, and L8J
• Supports QLX-D Digital Wireless System
  • Discovers QLX-D channels
  • Coordinates frequencies for QLX-D channels
• Supports entry and maintenance of missing band information for CFL entries.
  • Requires all CFL entries edited/added from AXT600 to specify band values.

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.15.3:
  • UR4 UHF-R receiver 1.171
  • UR3 Plug-on Transmitter 1.0.0.16
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4x ULX-D Receivers 1.5.6
  • QLXD4 QLX-D Receiver 1.0.13
  • P10T PSM1000 Transmitter 1.3.9
  • Wireless Workbench 6.10.0

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.15.3:
  • UR4 UHF-R receiver 1.171
  • UR3 Plug-on Transmitter 1.0.0.16
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4x ULX-D Receivers 1.5.6
  • QLXD4 QLX-D Receiver 1.0.13
  • P10T PSM1000 Transmitter 1.3.9
  • Wireless Workbench 6.10.0

New Features

• ULX-D/QLX-D Interoperability support. This release is required to support using ULX-D transmitters with QLX-D receivers. The following limitations apply:
  • QLX-D transmitters must be manually tuned to the same frequency as ULX-D receivers.
  • Encryption must be disabled on both systems.
  • QLX-D will not display transmitter type, but Wireless Workbench 6 will display the transmitter type as ULXD1/ULXD2.

Notes

• After updating the ULXD4 Single Receiver the user is required to reset the unit to Default Settings (DEVICE UTILITIES/SYSTEM RESET/RESTORE/DEFAULT SETTINGS).
• For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.5.6:
  • ULX-D ULXD1/2 Transmitters and ULXD4, ULXD4D, ULXD4Q Receivers 1.5.6
  • Axient AXT400 Receivers and AXT600 Spectrum Managers 1.15.3
  • Wireless Workbench 6 version 6.10.0

New Features

• Interference Notifications for ULX-D are now displayed in Wireless Workbench 6.10 in the Interference Events dialog.
• ULX-D/QLX-D interoperability support. This release is required to support QLX-D transmitters. ULX-D receivers are compatible with QLX-D transmitters and will display QLXD1 or QLXD2 transmitter type given the following limitations
  • QLX-D transmitters must be manually tuned to the same frequency as ULX-D receivers.
  • ULX-D receivers cannot be in High Density mode (High Density mode is not available on QLX-D receivers)
  • Encryption must be disabled on both systems.

Notes

• After updating the ULXD4 Single Receiver from version 1.0.7, the user is required to reset the unit to Default Settings (DEVICE UTILITIES/SYSTEM RESET/RESTORE/DEFAULT SETTINGS).
• For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.5.6:
  • ULX-D ULXD1/2 Transmitters and ULXD4, ULXD4D, ULXD4Q Receivers 1.5.6
  • Axient AXT400 Receivers and AXT600 Spectrum Managers 1.15.3
  • Wireless Workbench 6 version 6.10.0

Important

• ULXD4D and ULXD4Q receivers running firmware prior to 1.4.8 must be updated to 1.4.8 before updating to newer versions.
• ULXD4D and ULXD4Q receivers running firmware between 1.4.8 and 2.0.28 must be updated to 2.0.28 before updating to newer versions.
• After 2.0.28 is installed, ULXD4D and ULXD4Q receivers can be updated to the latest available firmware version.
• ULX-D devices that are downgrading to 1.5.6 may report a false failure.
  • Workaround: Because this is a false failure, closing the send updates window and going to the main page, Shure Update Utility will show green for the firmware version.

New Features

• Interference Notifications for ULX-D are now displayed in Wireless Workbench 6.10 in the Interference Events dialog.
• ULX-D/QLX-D interoperability support. This release is required to support QLX-D transmitters. ULX-D receivers are compatible with QLX-D transmitters and will display QLXD1 or QLXD2 transmitter type given the following limitations
  • QLX-D transmitters must be manually tuned to the same frequency as ULX-D receivers.
  • ULX-D receivers cannot be in High Density mode (High Density mode is not available on QLX-D receivers)
  • Encryption must be disabled on both systems.

Improvements

• New Home Screen format displayed menu
  • Simplfied the ability to access and name both the Detailed per channel home screen and the ULXD4D/Q Summary screen by creating two separate menu structures.

Notes

• For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.5.6:
  • ULX-D ULXD1/2 Transmitters and ULXD4, ULXD4D, ULXD4Q Receivers 1.5.6
  • Axient AXT400 Receivers and AXT600 Spectrum Managers 1.15.3
  • Wireless Workbench 6 version 6.10.0

Important

• ULXD4D and ULXD4Q receivers running firmware prior to 1.4.8 must be updated to 1.4.8 before updating to newer versions.
• ULXD4D and ULXD4Q receivers running firmware between 1.4.8 and 2.0.28 must be updated to 2.0.28 before updating to newer versions.
• After 2.0.28 is installed, ULXD4D and ULXD4Q receivers can be updated to the latest available firmware version.
• ULX-D devices that are downgrading to 1.5.6 may report a false failure.
  • Workaround: Because this is a false failure, closing the send updates window and going to the main page, Shure Update Utility will show green for the firmware version.

New Features

• Interference Notifications for ULX-D are now displayed in Wireless Workbench 6.10 in the Interference Events dialog.
• ULX-D/QLX-D interoperability support. This release is required to support QLX-D transmitters. ULX-D receivers are compatible with QLX-D transmitters and will display QLXD1 or QLXD2 transmitter type given the following limitations
  • QLX-D transmitters must be manually tuned to the same frequency as ULX-D receivers.
  • Encryption must be disabled on both systems.

Improvements

• New Home Screen format displayed menu
  • Simplified the ability to access and name both the Detailed per channel home screen and the ULXD4D/Q Summary screen by creating two separate menu structures.

Notes

• For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.5.6:
  • ULX-D ULXD1/2 Transmitters and ULXD4, ULXD4D, ULXD4Q Receivers 1.5.6
  • Axient AXT400 Receivers and AXT600 Spectrum Managers 1.15.3
  • Wireless Workbench 6 version 6.10.0