सॉफ्टवेयर और फर्मवेयर अभिलेखागार

NEW FEATURES

• Support for the following Axient transmitter frequency Bands: MA24, G1E, H4E, J5E, MJBX, K4E, L3E, M8, P8, P9, Q5
• Support for the following Axient receiver variants: AXT400B, AXT400C
• AXT400C receiver also supports the following UHF-R transmitter bands: A24, JBX, Q10a, Q5HK
• The AXT400 receiver supports user-created frequency groups. Creation, editing and deployment of these groups to other receivers can be done from the front panel interface of the receiver (Radio>Options>Custom)
• Custom Groups can also be created and edited from the AXT400 Properties panel in Wireless Workbench 6.
• A Custom Group can include any frequency in the tunable range of the receiver. The selectable Channels within a Custom Group are filtered by the currently selected Band.
• The Load function exports Custom Groups from a receiver over the network to other receivers of the same Model. This makes the Custom Groups available on the client receivers but does not set frequencies.
• The Group Scan function can send Custom Groups to client Axient receivers set to the same band as the deploying receiver, and programs the client receivers with frequencies using the scan results.
• Axient and UHF-R transmitters can get Custom Groups from the AXT400 receiver via IR Sync (from AXT400 menu select Tx>IR Presets>CG, select ‘Sync Custom Groups’ and then IR Sync the transmitter).

IMPROVEMENTS

• Improved Front Panel Lock feature, allows some menu navigation to view settings while not allowing changes to parameters.
• Improved resistance to interference from ultrasonic sources such as motion sensors.

KNOWN ISSUES

• Using the AXT400 receiver as a scanning device from WWB6, the error message may appear: ‘Scanner reported no Scan ID Available’. This is triggered by a previous IR Sync operation from that receiver which included Custom Groups. The following actions will release the receiver from this state:
  • Start a scan from the receiver front panel menu (Radio>Scan, either Channel Scan or Group Scan function will clear the problem). It is not necessary to deploy the results of the scan.
  • Power cycle the receiver.

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.8.8:
  • UR4 UHF-R receiver - 1.166
  • UR3 Plug-on Transmitter - 1.0.0.9
  • UR5 Portable Diversity Receiver - 1.0.0.13
  • ULXD4 ULX-D Receiver - 1.0.3
  • P10T PSM1000 Transmitter - 1.3.4
  • Wireless Workbench - 6.3.1 Beta

NEW FEATURES

• Support for the following Axient transmitter frequency Bands: MA24, G1E, H4E, J5E, MJBX, K4E, L3E, M8, P8, P9, Q5
• Axient transmitters now support custom groups.
• Axient and UHF-R transmitters can get Custom Groups from the AXT400 receiver via IR Sync (from AXT400 menu select Tx>IR Presets>CG, select ‘Sync Custom Groups’ and then IR Sync the transmitter).

NOTES

• Transmitters to be used with receivers must be updated via IR. After updating the receiver, select Tx>IR Presets>FW Update from the receiver menu and align the infrared ports with the transmitter before selecting ‘Download’.
• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.8.8:
  • UR4 UHF-R receiver - 1.166
  • UR3 Plug-on Transmitter - 1.0.0.9
  • UR5 Portable Diversity Receiver - 1.0.0.13
  • ULXD4 ULXD Receiver - 1.0.3
  • P10T PSM1000 Transmitter - 1.3.4
  • Wireless Workbench - 6.3.1 Beta

NEW FEATURES

• Support for the following Axient transmitter frequency Bands: MA24, G1E, H4E, J5E, MJBX, K4E, L3E, M8, P8, P9, Q5
• Axient transmitters now support custom groups.
• Axient and UHF-R transmitters can get Custom Groups from the AXT400 receiver via IR Sync (from AXT400 menu select Tx>IR Presets>CG, select ‘Sync Custom Groups’ and then IR Sync the transmitter).

NOTES

• Transmitters to be used with receivers must be updated via IR. After updating the receiver, select Tx>IR Presets>FW Update from the receiver menu and align the infrared ports with the transmitter before selecting ‘Download’.
• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.8.8:
  • UR4 UHF-R receiver - 1.166
  • UR3 Plug-on Transmitter - 1.0.0.9
  • UR5 Portable Diversity Receiver - 1.0.0.13
  • ULXD4 ULXD Receiver - 1.0.3
  • P10T PSM1000 Transmitter - 1.3.4
  • Wireless Workbench - 6.3.1 Beta

DC 6990 P dual unit logout problem solved

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.7.5:
  • UR4 UHF-R receiver 1.166
  • UR3 Plug-on Transmitter 1.0.0.9
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4 ULXD Receiver 1.0.3
  • P10T PSM1000 Transmitter 1.3.1 Beta
  • Wireless Workbench 6.2.1.34 Beta

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.7.5:
  • UR4 UHF-R receiver 1.166
  • UR3 Plug-on Transmitter 1.0.0.9
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4 ULXD Receiver 1.0.3
  • P10T PSM1000 Transmitter 1.3.1 Beta
  • Wireless Workbench 6.2.1.34 Beta

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.7.5:
  • UR4 UHF-R receiver 1.166
  • UR3 Plug-on Transmitter 1.0.0.9
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4 ULXD Receiver 1.0.3
  • P10T PSM1000 Transmitter 1.3.1 Beta
  • Wireless Workbench 6.2.1.34 Beta

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.7.5:
  • UR4 UHF-R receiver 1.166
  • UR3 Plug-on Transmitter 1.0.0.9
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4 ULXD Receiver 1.0.3
  • P10T PSM1000 Transmitter 1.3.1 Beta
  • Wireless Workbench 6.2.1.34 Beta

NOTES

• Transmitters to be used with receivers must be updated via IR. After updating the receiver, select Tx > IR Presets > FW Update from the receiver menu and align the infrared ports with the transmitter before selecting ‘Download’.
• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.7.5:
  • UR4 UHF-R receiver 1.166
  • UR3 Plug-on Transmitter 1.0.0.9
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4 ULXD Receiver 1.0.3
  • P10T PSM1000 Transmitter 1.3.1 Beta
  • Wireless Workbench 6.2.1.34 Beta

NOTES

• Transmitters to be used with receivers must be updated via IR. After updating the receiver, select Tx > IR Presets > FW Update from the receiver menu and align the infrared ports with the transmitter before selecting ‘Download’.
• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.7.5:
  • UR4 UHF-R receiver 1.166
  • UR3 Plug-on Transmitter 1.0.0.9
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4 ULXD Receiver 1.0.3
  • P10T PSM1000 Transmitter 1.3.1 Beta
  • Wireless Workbench 6.2.1.34 Beta