डाउनलोड
सॉफ्टवेयर और फर्मवेयर अभिलेखागार
फर्मवेयर
2.7.1
December 11, 2023
सभी अपडेट देखें
Recommendation
- Update all QLX-D devices in a configuration to the same firmware version.
Important
- QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.
Improvements
- Support for added hardware revisions
Notes
- User Guide
- To operate QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on version 2.X firmware or later.
- To operate this version of QLX-D devices with other Shure networked systems and software, see the following list of recommended versions:
- AXT600 Axient Spectrum Manager 2.1.41
- PSM1000 P10T Transmitters 1.8.6
- ULX-D 2.7.6
- Wireless Workbench 6.15.4 or 7.0.0
- Shure Update Utility 2.8.3
- ShurePlus Channels iOS 1.6.1
- ShurePlus Channels Android 1.6.2
फर्मवेयर
2.7.1
December 11, 2023
सभी अपडेट देखें
Recommendation
- Update all QLX-D devices in a configuration to the same firmware version.
Important
- QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.
Improvements
- Support for added hardware revisions
Notes
- User Guide
- To operate QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on version 2.X firmware or later.
- To operate this version of QLX-D devices with other Shure networked systems and software, see the following list of recommended versions:
- AXT600 Axient Spectrum Manager 2.1.41
- PSM1000 P10T Transmitters 1.8.6
- ULX-D 2.7.6
- Wireless Workbench 6.15.4 or 7.0.0
- Shure Update Utility 2.8.3
- ShurePlus Channels iOS 1.6.1
- ShurePlus Channels Android 1.6.2
फर्मवेयर
2.7.1
December 11, 2023
सभी अपडेट देखें
Recommendation
- Update all QLX-D devices in a configuration to the same firmware version.
Important
- QLX-D 2.X firmware versions are incompatible with 1.X firmware versions. To ensure all receivers and transmitters in a configuration function with each other, update all devices to the same firmware version.
Improvements
- Support for added hardware revisions
Notes
- User Guide
- To operate QLX-D transmitters with ULX-D receivers and ULX-D transmitters with QLX-D receivers, all devices must be on version 2.X firmware or later.
- To operate this version of QLX-D devices with other Shure networked systems and software, see the following list of recommended versions:
- AXT600 Axient Spectrum Manager 2.1.41
- PSM1000 P10T Transmitters 1.8.6
- ULX-D 2.7.6
- Wireless Workbench 6.15.4 or 7.0.0
- Shure Update Utility 2.8.3
- ShurePlus Channels iOS 1.6.1
- ShurePlus Channels Android 1.6.2
फर्मवेयर
1.5.24
December 1, 2023
सभी अपडेट देखें
Improvements
- Bug fixes
Known Issues
- The optional ARRAY_HEIGHT_OVERRIDE value sent via command strings must be resent upon power cycle
- If the ARRAY_HEIGHT_OVERRIDE command is used to set a height that is outside the valid range (122-914 cm), the command will not display an error but internally, the value will be rejected from being set
- Acoustic reflections from tables can sometimes be mistaken by the MXA920 as another source/talker location. The symptom is a second talker location coordinate set in front of and higher than the actual talker.
- Workaround: Place Coverage Areas to minimize pick-up of table surface reflections
- Channel Names are not set in the initial attempt of ‘push-to-Dante’. Dante interface resets when Device Name is set.
- Workaround: Channel Names are set on the 2nd attempt
- MXA920 LED does not stay on after a reboot if the light settings are set to Unmute = Blue, Mute = Red. Other light combinations work as expected after reboot.
- When a muted dynamic coverage area is moved when a dedicated coverage area has also been established, the mix output of the MXA920 has low-level audio from outside the dedicated coverage area limits
- Workaround: Unmute and Mute the dynamic coverage area after a dynamic coverage area is moved
Notes
- User Guide
- Command Strings
- Note that Talker Position Events are published for talkers in a coverage area regardless of the mute status of the coverage area. To fully inform camera switching decision logic, subscribe to the Coverage Area Mute Status. See https://pubs.shure.com/command-strings for further information
- To operate this version of MXA920 with Dante Controller, reference the following minimum versions:
- v3.10.2.4 (Windows)
- v3.10.2.3 (Mac OS X)
- To operate this version of MXA920 with Shure software or other Shure networked systems, reference the following list of recommended versions supported:
- Designer 4.7.25
- IntelliMix Room 4.2.0
- ANI22/ANI4IN/ANI4OUT 4.7.6
- ANIUSB-MATRIX 4.7.21
- MXA310 4.7.8
- MXA710 1.5.16
- MXA910 4.7.13
- MXN5-C 1.5.21
- MXA-MUTE 1.5.17
- P300 4.7.21
- Shure Update Utility 2.8.3
- Shure Web Device Discovery 1.2.17
फर्मवेयर
1.5.24
December 1, 2023
सभी अपडेट देखें
Improvements
- Bug fixes
Known Issues
- The optional ARRAY_HEIGHT_OVERRIDE value sent via command strings must be resent upon power cycle
- If the ARRAY_HEIGHT_OVERRIDE command is used to set a height that is outside the valid range (122-914 cm), the command will not display an error but internally, the value will be rejected from being set
- Acoustic reflections from tables can sometimes be mistaken by the MXA920 as another source/talker location. The symptom is a second talker location coordinate set in front of and higher than the actual talker.
- Workaround: Place Coverage Areas to minimize pick-up of table surface reflections
- Channel Names are not set in the initial attempt of ‘push-to-Dante’. Dante interface resets when Device Name is set.
- Workaround: Channel Names are set on the 2nd attempt
- MXA920 LED does not stay on after a reboot if the light settings are set to Unmute = Blue, Mute = Red. Other light combinations work as expected after reboot.
- When a muted dynamic coverage area is moved when a dedicated coverage area has also been established, the mix output of the MXA920 has low-level audio from outside the dedicated coverage area limits
- Workaround: Unmute and Mute the dynamic coverage area after a dynamic coverage area is moved
Notes
- User Guide
- Command Strings
- Note that Talker Position Events are published for talkers in a coverage area regardless of the mute status of the coverage area. To fully inform camera switching decision logic, subscribe to the Coverage Area Mute Status. See https://pubs.shure.com/command-strings for further information
- To operate this version of MXA920 with Dante Controller, reference the following minimum versions:
- v3.10.2.4 (Windows)
- v3.10.2.3 (Mac OS X)
- To operate this version of MXA920 with Shure software or other Shure networked systems, reference the following list of recommended versions supported:
- Designer 4.7.25
- IntelliMix Room 4.2.0
- ANI22/ANI4IN/ANI4OUT 4.7.6
- ANIUSB-MATRIX 4.7.21
- MXA310 4.7.8
- MXA710 1.5.16
- MXA910 4.7.13
- MXN5-C 1.5.21
- MXA-MUTE 1.5.17
- P300 4.7.21
- Shure Update Utility 2.8.3
- Shure Web Device Discovery 1.2.17
फर्मवेयर
2.10.0
November 30, 2023
सभी अपडेट देखें
Improvements
- This release provides further improvements to audio and AEC performance in multi-device systems
Notes
सॉफ्टवेयर
1.5.3
November 28, 2023
सभी अपडेट देखें
Important
- This update is for macOS only
Improvements
- Backend fixes
Notes
- MV7 User Guide
- MVX2U User Guide
- Compatible operating systems:
- Intel-based Macs: Big Sur, Monterey, and Ventura
- Apple Silicon Macs (M1 and M2): Big Sur, Monterey, and Ventura
- *If you are unsure what type of Mac you have, you can learn more here
- This version of ShurePlus MOTIV Desktop is compatible with the following recommended firmware versions:
- MVX2U 1.1.1
- MV7 1.2.18
- MV88+ 1.1.17
- We recommend updating to the latest firmware versions for the best experience
फर्मवेयर
1.2.18
November 17, 2023
सभी अपडेट देखें
Improvements
- Addresses audio distortion issues
Notes
- User Guide
- Firmware updates for MV7 are available in the ShurePlus MOTIV app for iOS and Android, as well as the MOTIV Desktop application
- Shure MV7 is compatible with the following recommended software versions:
- ShurePlus MOTIV iOS 3.7.7
- ShurePlus MOTIV Android 3.7.2
- ShurePlus MOTIV Video iOS 1.8.4
- ShurePlus MOTIV Video Android 1.8.4
- ShurePlus MOTIV for Mac 1.5.1 and Windows 1.5.2
फर्मवेयर
1.1.17
November 17, 2023
सभी अपडेट देखें
Improvements
- Addresses audio distortion issues
Notes
- User Guide
- Firmware updates for MV88+ are available in the ShurePlus MOTIV app for iOS and Android, as well as the MOTIV Desktop application
- Shure MV88+ is compatible with the following recommended software versions:
- ShurePlus MOTIV iOS 3.7.7
- ShurePlus MOTIV Android 3.7.2
- ShurePlus MOTIV Video iOS 1.8.4
- ShurePlus MOTIV Video Android 1.8.4
- ShurePlus MOTIV for Mac 1.5.1 and Windows 1.5.2
सॉफ्टवेयर
1.5.2
November 8, 2023
सभी अपडेट देखें
Important
- This update is for Windows only
Improvements
- Fixes issue with some users when launching the app and stalling with loading
Notes
- MV7 User Guide
- MVX2U User Guide
- Compatible operating systems:
- Windows 10 and 11 (64-bit versions)
- This version of ShurePlus MOTIV Desktop is compatible with the following recommended firmware versions:
- MVX2U 1.1.1
- MV7 1.2.18
- MV88+ 1.1.17
- We recommend updating to the latest firmware versions for the best experience