Software & Firmware Archives

Improvements

• SIP registration fix
• Audio data transfer update
• Mute functionality fix

Bug Fixes

• Fixed an issue where some transmitters receive repeated RCAS command messages
• Fixed an issue where Axient Digital receivers would erroneously show a “?” battery status for Q5X transmitters
• Fixed an issue where Axient Digital receivers would incorrectly report Q5X transmitter audio as “Unknown”

Known Issues

• AD4 receivers indicate “Ready” status for a transmitter firmware update while the transmitter is in Standby mode, but the update will immediately fail.
• IR Sync may fail while loading custom groups to Q5X transmitters
• When operating Wireless Workbench or ShurePlus Channels, some labels and icons for Q5X transmitters may be missing

Notes

• This firmware is compatible with Q5X AquaMic™ and PlayerMic®
• To install Q5X firmware on devices:
  • Download Q5X 1.2.54 firmware from Shure Update Utility (user guide)
  • Connect to the AD4D or AD4Q receiver, and in the Hosted Tx section, select Q5XTx 1.2.54
  • Send the update to the receiver
  • Use IR Sync to update the transmitter firmware
• AD4D and AD4Q can only host one transmitter firmware image at a time; if you also need to update Axient Digital transmitters, please repeat the above process, but select an ADTx firmware version.
• To operate Q5X AquaMic™ and Q5X PlayerMic® version 1.2.54 with other Shure systems and software, see the following list of minimum versions:
  • AD4D 1.2.83
  • AD4Q 1.2.83
  • Wireless Workbench 6.13.3
  • ShurePlus Channels 1.4.2
  • Shure Update Utility 2.4.8
• Distributed by Shure, AquaMic™, PlayerMic® and MicCommander™ are Q5X products. For support and service, please visit www.q5x.com.

Improvements

• Bug fix for an issue where the app crashes if any previously recorded audio has a single quote in the name

Notes

• User Guide
• MV88+ User Guide
• Compatible with Android 8.0 and higher.
• NOTE FOR MV88+ USERS: Learn about compatibility with your Android device at www.shure.com/MOTIVcompatibility.

Important

• This software version is used for new SW6000 installations or to update all previous SW6000 installed versions using DIS-CCU Central Unit (CU 6005, CU 6010, CU 6011. CU 6105, CU 6110 and CU 5905 is not supported)
• This version is compatible with SW6000 Software License file v1.7 only
• No new SW6000 license is needed if updating from SW6000 v6.0.xxx or later versions
• A new SW6000 license is needed if updating from SW6000 v5.8.xxx or previous versions

New Features

• No new features are introduced in this version. Please refer to the release notes for version 9.0.12 for details about new features in version 9.0

Bug Fixes

• CDA
  • Individual voting results are shown in the CDA when secret voting is selected
  • Customer-inserted Mimic icons in voting configuration are switched
• CUA
  • When a secret vote is performed on the CUA, it is not indicated in the buttons that a vote has been cast
  • The 'Cancel' voting button is not available even if it is configured in voting config

Notes

• To operate MXC devices with SW6000 version 9.0, see the following list of minimum software and firmware versions:
  • MXC firmware release 9.0

Improvements

• Added support for new RF bands

Bug Fixes

• Fixed issues with Axient Digital-enabled Q5X wireless transmitters:
• Fixed an issue with the battery display
• Fixed an issue where AD4 receivers incorrectly reported mute status
• Fixed an issue where transmitters status is shown as “Ready” for firmware update when on Standby mode
• Fixed an issue where the transmitter fails to sync while loading custom groups

Notes

• User Guide
• Command Strings
• We recommend updating all devices used together to the same firmware version.
• To operate AD4Q version 1.2.83 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 and ADX1/1M/2 Transmitters 1.2.83
  • Axient Digital AD4D/Q Receivers 1.2.83
  • Axient AXT600 Spectrum Manager 2.1.31
  • SBRC Shure Battery Rack Charger 1.1.5
  • Shure Update Utility 2.4.8
  • ShurePlus Channels 1.4.2
  • Wireless Workbench 6.13.3

Improvements

• Added support for new RF bands

Bug Fixes

• Fixed issues with Axient Digital-enabled Q5X wireless transmitters:
  • Fixed an issue with the battery display
  • Fixed an issue where AD4 receivers incorrectly reported mute status
  • Fixed an issue where transmitters status is shown as “Ready” for firmware update when on Standby mode
  • Fixed an issue where the transmitter fails to sync while loading custom groups

Notes

• User Guide
• Command Strings
• We recommend updating all devices used together to the same firmware version.
• To operate AD4D version 1.2.83 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 and ADX1/1M/2 Transmitters 1.2.83
  • Axient Digital AD4D/Q Receivers 1.2.83
  • Axient AXT600 Spectrum Manager 2.1.31
  • SBRC Shure Battery Rack Charger 1.1.5
  • Shure Update Utility 2.4.8
  • ShurePlus Channels 1.4.2
  • Wireless Workbench 6.13.3

Improvements

• Support for G56 AD3 band variants for Indonesia and Vietnam
• Support for G55 and K53 AD3 band variants for Brazil

Notes

• User Guides: AD1 | AD2 | ADX1 | ADX1M | ADX2 | ADX2FD
• We recommend updating all devices used together to the same firmware version.
• To operate AD1/2 and ADX1/1M/2 version 1.2.83 devices with other Shure systems and software, see the following list of minimum versions:
• Axient Digital AD1/2 and ADX1/1M/2 Transmitters 1.2.83
• Axient Digital AD4D/Q Receivers 1.2.83
• Axient AXT600 Spectrum Manager 2.1.31
• SBC240/840/840M Chargers 1.2.73
• SBRC Shure Battery Rack Charger 1.1.5
• Shure Update Utility 2.4.8
• ShurePlus Channels 1.4.2
• Wireless Workbench 6.13.3

Improvements

• Bug fixes

Notes

• User Guide
• Compatible with Android 8.0 and higher. We can’t ensure compatibility or full feature functionality with older operating systems. Please report problems and submit general feedback through the app (Settings > Feedback)

New Features

• Added device clock to home page
• Added ability to disable automatic firmware updates

Improvements

• Bug fixes

New Features

• Added device clock to home page
• Added ability to disable automatic firmware updates

Improvements

• Bug fixes