ダウンロード
ソフトウェア/ファームウェア アーカイブ
アプリ
3.0.1.60
2021年9月21日
アップデートをすべて見る
Improvements
- Bug fixes
Known Issues
- For devices utilizing Android OS 9, after navigating to “Settings” during playback, music tracks will pause.
- Resolution: Navigate to “Allow Background Activity” and enable the setting.
Notes
- User Guide
- Compatible with Android 8.0 and higher. We can’t ensure compatibility or full feature functionality with older operating systems. Please report problems and submit general feedback through the app (Settings > Feedback)
アプリ
1.0.2
2021年9月17日
アップデートをすべて見る
Device Support
- Axient® Digital wireless microphone system
- Axient® wireless microphone system
- ULX-D® digital wireless microphone system
- QLX-D® digital wireless microphone system
- SLX-D digital wireless microphone system
- PSM®1000 wireless in-ear monitor system
- UHF-R/MW wireless microphone system
Known Issues
- When an Axient Digital receiver mode is changed from different modes (transmission modes, or Quadversity mode, or frequency diversity mode) the application may crash.
- The application may crash when it is brought to the foreground from the background by using the application icon on the home screen.
- The application may crash in certain scenarios on an Android 9 OS device.
- The application may crash if it continues to run while open for over one hour.
- ULXD4Q receivers’ audio LEDs in the application do not match the hardware’s front panel LEDs during audio overloads while in audio summing modes.
- ULXD6/ULXD8 battery bars are not displaying in the list view while using AA batteries.
- In certain scenarios, the Access Control “Enter PIN” dialog does not get dismissed.
- On firmware version 1.0.13 for SLX-D transmitters, battery type may not persist between power cycles. To resolve, set the battery type again on the transmitter.
Notes
- User Guide
- Compatible with Android 9.0 and later. We can’t ensure compatibility or full feature functionality with older operating systems.
- Compatible with most Android phones from Samsung, Google, OnePlus, Motorola, and more.
- Please report problems and submit general feedback through the app (Settings > Help > Report a Problem/General Feedback). This will open your default email application where you can add details about the issue you are experiencing. To send the email requires an active internet connection.
- An 802.11 or 802.11ac wireless router is recommended for Wi-Fi connection.
- In order to view the SSID of your network connection type or SSID in the network status bar, you must permit the app access to your location. To do so, go to the Settings app on your Android Phone select Location > App Permissions > Channels, and choose “Allow Only While Using the App”.
- Wired ethernet connection has been tested with the following adapters:
- UGREEN Ethernet Adapter USB 2.0 to 10/100 Network RJ45 LAN Wired Adapter
- INSIGNIA USB 3.0 to Gigabit Ethernet Adapter
- Nonda USB-A to USB-C Adapter
- For best results, ensure your connected devices are updated to the latest firmware using the Shure Update Utility desktop app.
- To operate this version of ShurePlus Channels with other Shure products, reference the following list of minimum versions supported:
- Axient Digital 1.3.26
- ULX-D 2.4.25
- QLX-D 2.4.3
- SLX-D 1.0.13
- PSM1000 1.7.10
- Axient 2.1.11
- UHF-R 1.171
- Shure Update Utility 2.6.1
- Wireless Workbench 6.14.1
アプリ
3.0.1
2021年9月7日
アップデートをすべて見る
新機能
- ハードウェアEQ – EQ設定を変更し、対応するShureヘッドホンまたはイヤホンに直接保存することで、アプリを接続していないときのサウンドもカスタマイズできます。
- 新しいAONIC TW2のサポート
- ボタンのカスタマイズ
- 操作説明ビデオ – デバイスの使用方法を視聴できます
改善点
- ユーザーインターフェースの改善
- バグ修正
既知の問題点
- Android OS 9で動作するデバイスで、再生中に「設定」を開くとトラックの再生が一時停止します。
- 解決策:「Allow Background Activity」を開き、設定を有効にします。
注記
- ユーザーガイド
- AONIC TW2ユーザーガイド
- AONIC 50ユーザーガイド
- Android 8.0以上に対応しています。それ以前のオペレーティングシステムとの互換性または正常動作は保証できません。問題の報告や全体的なフィードバックはアプリ上からお送りください (設定 > フィードバック)
アプリ
3.0.1
2021年9月7日
アップデートをすべて見る
新機能
- ハードウェアEQ – EQ設定を変更し、対応するShureヘッドホンまたはイヤホンに直接保存することで、アプリを接続していないときのサウンドもカスタマイズできます。
- 新しいAONIC TW2のサポート
- ボタンのカスタマイズ
- 操作説明ビデオ – デバイスの使用方法を視聴できます。
改善点
- ユーザーインターフェースの改善
- バグ修正
既知の問題点
- ShurePlus PLAYは、デバイスのミュージックライブラリーに保存されているファイルを再生できます。これを有効にするにはiOSの「設定」を開き、アプリのリストから「PLAY」を選択し、「PLAYにアクセスを許可」の「メディアとApple Music」をオンにします。
- 再生できるのはデバイスにローカル保存されているファイルのみです。クラウドに保存されているトラックがグレー表示されることがありますが、それらは再生できません。
注記
- ユーザーガイド
- AONIC TW2ユーザーガイド
- AONIC 50ユーザーガイド
- iPhone 6S以降をサポートしています。iPadおよびiPod Touchはサポートしていません。
- iOS 13.0以降に対応しています。それ以前のオペレーティングシステムとの互換性または完全動作は保証できません。問題の報告や全体的なフィードバックはアプリからお送りください(「設定」>「フィードバック」)。
アプリ
3.0.0
2021年8月4日
アップデートをすべて見る
Improvements
- User interface improvements
- Music player improvements
- Improved play queue
- Recently deleted/added sort option
- Shuffle improvements
- Bug fixes
Known Issues
- For devices utilizing Android OS 9, after navigating to “Settings” during playback, music tracks will pause.
- Resolution: Navigate to “Allow Background Activity” and enable the setting.
Notes
- User Guide
- Compatible with Android 8.0 and higher. We can’t ensure compatibility or full feature functionality with older operating systems. Please report problems and submit general feedback through the app (Settings > Feedback)
アプリ
3.0.0
2021年8月2日
アップデートをすべて見る
改善点
- ユーザーインターフェースの改善
- バグ修正
既知の問題点
- ShurePlus PLAYは、デバイスのミュージックライブラリーに保存されているファイルを再生できます。これを有効にするにはiOSの「設定」を開き、アプリのリストから「PLAY」を選択し、「PLAYにアクセスを許可」の「メディアとApple Music」をオンにします。
- 再生できるのはデバイスにローカル保存されているファイルのみです。クラウドに保存されているトラックがグレー表示されることがありますが、それらは再生できません。
注記
- ユーザーガイド
- iPhone 6S以降をサポートしています。iPadおよびiPod Touchはサポートしていません。
- iOS 13.0以降に対応しています。それ以前のオペレーティングシステムとの互換性または完全動作は保証できません。問題の報告や全体的なフィードバックはアプリからお送りください(「設定」>「フィードバック」)。
アプリ
1.6.0
2021年7月26日
アップデートをすべて見る
Improvements
- Bug fixes
Known Issues
- The FPS and resolution combinations available for selection will vary based on the user’s phone.
Notes
- MV88+ User Guide
- Frequently Asked Questions
- Compatible with Android 8.0 and higher
- NOTE FOR MV88+ USERS: Learn about compatibility with your Android device at www.shure.com/MOTIVcompatibility
アプリ
3.3.0
2021年7月26日
アップデートをすべて見る
New Features
- Sort/Search User Recordings
- Reminder to back up recordings
Improvements
- User interface improvements
- Bug fixes
Known Issues
- A small percentage of users may receive a numerical error message while recording, such as “-1” or “66570.” These messages occur when there was an error writing to the device and are related to Apple’s new file system (APFS). One of these errors can occur even if your device has plenty of remaining storage. We recommend clearing up your device storage from the Settings screen, and if that doesn’t resolve the issues, doing a full restore from iTunes, consisting of backing up your device, wiping/restoring to factory settings, and restoring from the backup.
- If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.
- When connected to iPad Pro via a USB-C cable, the MV88+ will pass audio and gain can be adjusted. However, the MOTIV apps will only display ‘external mic’, and the settings screen will not be available. Shure recommends using another device to configure the settings before using with iPad Pro. No adjustments can be made in real time (except gain) on the Shure MOTIV apps when using an iPad Pro.
Notes
- MV7 User Guide
- MV88+ User Guide
- MV88 User Guide
- Frequently Asked Questions
- This app is compatible with iOS 13.0 or later. We can’t ensure compatibility or full feature functionality with older operating systems. Please report problems and submit general feedback through the app (About > Feedback)
- Compatible with iPhone, iPad, iPod touch, and Apple Watch
アプリ
1.5.2
2021年7月7日
アップデートをすべて見る
Improvements
- Bug fixes
Known Issues
- The FPS and resolution combinations available for selection will vary based on the user’s phone.
- If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.
Notes
- MOTIV Video User Guide
- MV88+ Video User Guide
- MV88 User Guide
- Frequently Asked Questions
- This app is compatible with iOS 13.0 or later. We can’t ensure compatibility or full feature functionality with older operating systems. Please report problems and submit general feedback through the app (About > Feedback)
- Compatible with iPhone and Apple Watch – iPad and iPod Touch are not supported
アプリ
3.2.4
2021年7月6日
アップデートをすべて見る
Improvements
- Bug fixes
Known Issues
- A small percentage of users may receive a numerical error message while recording, such as “-1” or “66570.” These messages occur when there was an error writing to the device and are related to Apple’s new file system (APFS). One of these errors can occur even if your device has plenty of remaining storage. We recommend clearing up your device storage from the Settings screen, and if that doesn’t resolve the issues, doing a full restore from iTunes, consisting of backing up your device, wiping/restoring to factory settings, and restoring from the backup.
- If you monitor your recordings with Bluetooth earphones, you may hear artifacts, such as noise, while monitoring. If this occurs, we recommend changing the sample rate of your recordings. Some products may produce artifacts at 44.1 kHz, while others may do so for 48 kHz recordings. Please keep in mind that even if you hear artifacts while monitoring, they will not be present in the recordings themselves.
- When connected to iPad Pro via a USB-C cable, the MV88+ will pass audio and gain can be adjusted. However, the MOTIV apps will only display ‘external mic’, and the settings screen will not be available. Shure recommends using another device to configure the settings before using with iPad Pro. No adjustments can be made in real time (except gain) on the Shure MOTIV apps when using an iPad Pro.
Notes
- MV7 User Guide
- MV88+ User Guide
- MV88 User Guide
- Frequently Asked Questions
- This app is compatible with iOS 13.0 or later. We can’t ensure compatibility or full feature functionality with older operating systems. Please report problems and submit general feedback through the app (About > Feedback)
- Compatible with iPhone, iPad, iPod touch, and Apple Watch
ページ 11 / 21