Archiwum oprogramowania i firmware

Improvements

• Backend updates

Notes

• User Guide
• To operate this version of SLX-D with other Shure networked systems, see the following list of recommended versions:
  • Wireless Workbench 6.15.4 or 7.2.0
  • Shure Update Utility 2.8.6

Improvements

• Backend updates

Notes

• User Guide
• To operate this version of SLX-D with other Shure networked systems, see the following list of recommended versions:
  • Wireless Workbench 6.15.4 or 7.2.0
  • Shure Update Utility 2.8.6

Improvements

• Teams Mute Sync support

Notes

• User Guide
• Firmware updates for MV7+ are available in the MOTIV Mix desktop application, as well as the MOTIV mobile apps

Compatibility

• MV7+ is compatible with the following software:
  • MOTIV Mix
  • MOTIV Audio (iOS & Android)
  • MOTIV Video (iOS & Android)
• We always recommend updating to the latest software and firmware versions for the best user experience.

Improvements

• Zero-based gain range

Notes

• User Guide
• Firmware updates for MVX2U are available in the MOTIV Mix desktop application

Compatibility

• MVX2U is compatible with the following software:
  • MOTIV Mix
  • MOTIV Desktop Application
• We always recommend updating to the latest software and firmware versions for the best user experience.

Improvements

• Bug fixes

Known Issues

• P300 Shure Audio Encryption sometimes has a brief crackling sound on audio after muting
• P300 firmware periodically adds new properties. The P300 may become undiscoverable if downgrading to firmware without the new properties and may need a factory reset to become discoverable.

Notes

• User Guide
• Command Strings
• Learn more about connecting via web browser in our FAQ

Compatibility

• To operate this version of P300 with Dante Controller, reference the following minimum versions:
  • v3.10.2.4 (Windows)
  • v3.10.2.3 (macOS)
• To operate this version of P300 with Microsoft Teams, reference the following minimum versions:
  • Microsoft Teams Desktop: 1.3.00.24755
  • Microsoft Teams Rooms: 4.6.20.0
• To operate this version of P300 with other Shure networked systems, reference the following list of recommended versions supported:
  • Designer 6.2.1
  • ANI22/ANI4IN/ANI4OUT 6.2.0
  • ANIUSB 6.2.14
  • ANIUSB 6.2.21
  • MXA310 6.2.0
  • MXA710 6.2.74
  • MXA910 6.2.0
  • MXA-MUTE 6.2.6
  • MXN5-C 6.2.6
  • MXW 10.0.X
  • Shure Update Utility 2.8.6
  • Shure Web Device Discovery 1.2.17

Improvements

• Bug fixes

Known Issues

• P300 Shure Audio Encryption sometimes has a brief crackling sound on audio after muting
• P300 firmware periodically adds new properties. The P300 may become undiscoverable if downgrading to firmware without the new properties and may need a factory reset to become discoverable.

Notes

• User Guide
• Command Strings
• Learn more about connecting via web browser in our FAQ

Compatibility

• To operate this version of P300 with Dante Controller, reference the following minimum versions:
  • v3.10.2.4 (Windows)
  • v3.10.2.3 (macOS)
• To operate this version of P300 with Microsoft Teams, reference the following minimum versions:
  • Microsoft Teams Desktop: 1.3.00.24755
  • Microsoft Teams Rooms: 4.6.20.0
• To operate this version of P300 with other Shure networked systems, reference the following list of recommended versions supported:
  • Designer 6.2.1
  • ANI22/ANI4IN/ANI4OUT 6.2.0
  • ANIUSB 6.2.14
  • ANIUSB 6.2.21
  • MXA310 6.2.0
  • MXA710 6.2.74
  • MXA910 6.2.0
  • MXA-MUTE 6.2.6
  • MXN5-C 6.2.6
  • MXW 10.0.X
  • Shure Update Utility 2.8.6
  • Shure Web Device Discovery 1.2.17

Improvements

• Bug fixes

Notes

• User Guide
• Command Strings
• Learn more about connecting via web browser in our FAQ

Compatibility

• To operate this version of MXN5-C with Dante Controller, reference the following minimum versions:
  • v3.10.2.4 (Windows)
  • v3.10.2.3 (Mac OS X)
• To operate this version of MXN5-C with Shure software or other Shure networked systems, reference the following list of recommended versions supported:
  • Designer 6.2.1
  • IntelliMix Room 6.3.0
  • ANI22/ANI4IN/ANI4OUT 6.2.0
  • ANIUSB 6.2.14
  • ANIUSB V3 6.2.21
  • MXA310 6.2.0
  • MXA710 6.2.74
  • MXA910 6.2.0
  • MXW 10.0.X
  • P300 6.2.44
  • ULXD4D/4Q 2.8.7
  • SCM820 1.4.3
  • Shure Update Utility 2.8.6
  • Shure Web Device Discovery 1.2.17

Improvements

• Bug fixes

Known Issues

• When one Unmute/Mute LED light color is set to White at 100% Brightness while the other Unmute/Mute light is set to Off, it may cause the button to freeze or the device mute state to spontaneously change. Lowering the device LED brightness alleviates this issue.

Notes

• User Guide
• Command Strings

Compatibility

• To operate this version of MXA MUTE with Shure software or other Shure networked systems, reference the following list of recommended versions supported:
  • Designer 6.2.1
  • ANIUSB 6.2.14
  • ANIUSB V3 6.2.21
  • MXA310 6.2.0
  • MXA710 6.2.74
  • MXA910 6.2.0
  • MXN5-C 6.2.6
  • P300 6.2.44
  • Shure Update Utility 2.8.6
  • Shure Web Device Discovery 1.2.17

Improvements

• Bug fixes

Known Issues

• The optional ARRAY_HEIGHT_OVERRIDE value sent via command strings must be resent upon power cycle
• If the ARRAY_HEIGHT_OVERRIDE command is used to set a height that is outside the valid range (122-914 cm), the command will not display an error but internally, the value will be rejected from being set
• Acoustic reflections from tables can sometimes be mistaken by the MXA920 as another source/talker location.  The symptom is a second talker location coordinate set in front of and higher than the actual talker.
  • Workaround: Place Coverage Areas to minimize pick-up of table surface reflections
• Channel Names are not set in the initial attempt of ‘push-to-Dante’. Dante interface resets when Device Name is set.
  • Workaround: Channel Names are set on the 2nd attempt
• MXA920 LED does not stay on after a reboot if the light settings are set to Unmute = Blue, Mute = Red. Other light combinations work as expected after reboot.
• When a muted dynamic coverage area is moved when a dedicated coverage area has also been established, the mix output of the MXA920 has low-level audio from outside the dedicated coverage area limits.
  • Workaround: Unmute and Mute the dynamic coverage area after a dynamic coverage area is moved

Notes

• User Guide
• Command Strings
• Learn more about connecting via web browser in our FAQ
• Note that Talker Position Events are published for talkers in a coverage area regardless of the mute status of the coverage area.  To fully inform camera switching decision logic, subscribe to the Coverage Area Mute Status. See Command Strings for further information.

Compatibility

• To operate this version of MXA920 with Dante Controller, reference the following minimum versions:
  • v3.10.2.4 (Windows)
  • v3.10.2.3 (Mac OS X)
• To operate this version of MXA920 with Shure software or other Shure networked systems, reference the following list of recommended versions supported:
  • Designer 6.2.1
  • IntelliMix Room 6.3.0
  • ANI22/ANI4IN/ANI4OUT 6.2.0
  • ANIUSB 6.2.14
  • ANIUSB V3 6.2.21
  • MXA310 6.2.0
  • MXA710 6.2.74
  • MXA901 6.2.46
  • MXA902 6.2.56
  • MXA910 6.2.0
  • MXA-MUTE 6.2.6
  • MXN5-C 6.2.6
  • P300 6.2.44
  • Shure Update Utility 2.8.6
  • Shure Web Device Discovery 1.2.17

Improvements

• Bug fixes

Known Issues

• The optional ARRAY_HEIGHT_OVERRIDE value sent via command strings must be resent upon power cycle
• If the ARRAY_HEIGHT_OVERRIDE command is used to set a height that is outside the valid range (122-914 cm), the command will not display an error but internally, the value will be rejected from being set
• Acoustic reflections from tables can sometimes be mistaken by the MXA920 as another source/talker location.  The symptom is a second talker location coordinate set in front of and higher than the actual talker.
  • Workaround: Place Coverage Areas to minimize pick-up of table surface reflections
• Channel Names are not set in the initial attempt of ‘push-to-Dante’. Dante interface resets when Device Name is set.
  • Workaround: Channel Names are set on the 2nd attempt
• MXA920 LED does not stay on after a reboot if the light settings are set to Unmute = Blue, Mute = Red. Other light combinations work as expected after reboot.
• When a muted dynamic coverage area is moved when a dedicated coverage area has also been established, the mix output of the MXA920 has low-level audio from outside the dedicated coverage area limits.
  • Workaround: Unmute and Mute the dynamic coverage area after a dynamic coverage area is moved

Notes

• User Guide
• Command Strings
• Learn more about connecting via web browser in our FAQ
• Note that Talker Position Events are published for talkers in a coverage area regardless of the mute status of the coverage area.  To fully inform camera switching decision logic, subscribe to the Coverage Area Mute Status. See Command Strings for further information.

Compatibility

• To operate this version of MXA920 with Dante Controller, reference the following minimum versions:
  • v3.10.2.4 (Windows)
  • v3.10.2.3 (Mac OS X)
• To operate this version of MXA920 with Shure software or other Shure networked systems, reference the following list of recommended versions supported:
  • Designer 6.2.1
  • IntelliMix Room 6.3.0
  • ANI22/ANI4IN/ANI4OUT 6.2.0
  • ANIUSB 6.2.14
  • ANIUSB V3 6.2.21
  • MXA310 6.2.0
  • MXA710 6.2.74
  • MXA901 6.2.46
  • MXA902 6.2.56
  • MXA910 6.2.0
  • MXA-MUTE 6.2.6
  • MXN5-C 6.2.6
  • P300 6.2.44
  • Shure Update Utility 2.8.6
  • Shure Web Device Discovery 1.2.17