Software & Firmware Archives

New Features

• Mute Lock: While mute lock is enabled, the microphone will remain muted or unmuted even when the mute button on the transmitter is pressed
• Timeout: Customizable timeout duration options for the display to remain active

Improvements

• Colored and gradient audio meters to visually represent audio levels
• RF performance enhancements

Notes

• User Guide
• Firmware updates for MoveMic are available in the MOTIV apps for iOS and Android, as well as Shure Update Utility

Compatibility

• We always recommend updating to the latest software and firmware versions for the best user experience.
• MoveMic Receiver is compatible with the following software versions:
  • MOTIV iOS 4.3.1
  • MOTIV Android 4.3.0
  • MOTIV Video iOS 2.3.2
  • MOTIV Video Android 2.3.1

These release notes cover the following models: 

• MXWNCS2/4/8 Networked Charging Stations

Important

• Update any MXW devices which are below the minimum supported firmware 8.0.3 by using the Shure Update Utility (SUU) found here.  Please note – should the firmware version used be older than 5.2.2, it is advised to upgrade to version 5.2.2 first before updating to any subsequent more recent releases. Close the SUU when complete.

Improvements

• Security enhancement - removal of basic network setup web-based user interface. Microflex Wireless Application should be used to configure the device's network settings.
• DHCP option 61 support - support for DHCP servers that make IP address offers that have option 61 defined.

Known Issues

• Multiple Primary Leader Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet

Notes

• User Guide
• Quick Start Guide
• Command Strings

Compatibility

• To operate this version of MXW with other Shure networked systems, see the following list of recommended software and firmware versions:
  • SCM820 1.4.3
  • Shure Web Device Discovery 1.2.17
  • Shure Update Utility 2.8.6

These release notes cover the following models: 

• MXWANI4/8 Audio Network Interfaces

Important

• Update any MXW devices which are below the minimum supported firmware 8.0.3 by using the Shure Update Utility (SUU) found here.  Please note – should the firmware version used be older than 5.2.2, it is advised to upgrade to version 5.2.2 first before updating to any subsequent more recent releases. Close the SUU when complete.

Improvements

• Security enhancement - removal of Civet Web server from device. Microflex Wireless Application should be used to configure all the device’s settings.

Known Issues

• Multiple Primary Leader Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet

Notes

• User Guide
• Quick Start Guide
• Command Strings

Compatibility

• To operate this version of MXW with other Shure networked systems, see the following list of recommended software and firmware versions:
  • SCM820 1.4.3
  • Shure Web Device Discovery 1.2.17
  • Shure Update Utility 2.8.6

These release notes cover the following models: 

• MXWANI4/8 Audio Network Interfaces

Important

• Update any MXW devices which are below the minimum supported firmware 8.0.3 by using the Shure Update Utility (SUU) found here.  Please note – should the firmware version used be older than 5.2.2, it is advised to upgrade to version 5.2.2 first before updating to any subsequent more recent releases. Close the SUU when complete.

Improvements

• Security enhancement - removal of Civet Web server from device. Microflex Wireless Application should be used to configure all the device’s settings.

Known Issues

• Multiple Primary Leader Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet

Notes

• User Guide
• Quick Start Guide
• Command Strings

Compatibility

• To operate this version of MXW with other Shure networked systems, see the following list of recommended software and firmware versions:
  • SCM820 1.4.3
  • Shure Web Device Discovery 1.2.17
  • Shure Update Utility 2.8.6

These release notes cover the following models: 

• MXWAPT2/4/8 Access Point Transceivers

Important

• Update any MXW devices which are below the minimum supported firmware 8.0.3 by using the Shure Update Utility (SUU) found here.  Please note – should the firmware version used be older than 5.2.2, it is advised to upgrade to version 5.2.2 first before updating to any subsequent more recent releases. Close the SUU when complete.

Improvements

• Security enhancement - removal of basic network setup web-based user interface. Microflex Wireless Application should be used to configure the device's network settings.
• DHCP option 61 support - support for DHCP servers that make IP address offers that have option 61 defined.

Known Issues

• Multiple Primary Leader Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet

Notes

• User Guide
• Quick Start Guide
• Command Strings

Compatibility

• To operate this version of MXW with other Shure networked systems, see the following list of recommended software and firmware versions:
  • SCM820 1.4.3
  • Shure Web Device Discovery 1.2.17
  • Shure Update Utility 2.8.6

These release notes cover the following models: 

• MXWAPT2/4/8 Access Point Transceivers

Important

• Update any MXW devices which are below the minimum supported firmware 8.0.3 by using the Shure Update Utility (SUU) found here.  Please note – should the firmware version used be older than 5.2.2, it is advised to upgrade to version 5.2.2 first before updating to any subsequent more recent releases. Close the SUU when complete.

Improvements

• Security enhancement - removal of basic network setup web-based user interface. Microflex Wireless Application should be used to configure the device's network settings.
• DHCP option 61 support - support for DHCP servers that make IP address offers that have option 61 defined.

Known Issues

• Multiple Primary Leader Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet

Notes

• User Guide
• Quick Start Guide
• Command Strings

Compatibility

• To operate this version of MXW with other Shure networked systems, see the following list of recommended software and firmware versions:
  • SCM820 1.4.3
  • Shure Web Device Discovery 1.2.17
  • Shure Update Utility 2.8.6

These release notes cover the following models: 

• MXWAPT2/4/8 Access Point Transceivers

Important

• Update any MXW devices which are below the minimum supported firmware 8.0.3 by using the Shure Update Utility (SUU) found here.  Please note – should the firmware version used be older than 5.2.2, it is advised to upgrade to version 5.2.2 first before updating to any subsequent more recent releases. Close the SUU when complete.

Improvements

• Security enhancement - removal of basic network setup web-based user interface. Microflex Wireless Application should be used to configure the device's network settings.
• DHCP option 61 support - support for DHCP servers that make IP address offers that have option 61 defined.

Known Issues

• Multiple Primary Leader Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet

Notes

• User Guide
• Quick Start Guide
• Command Strings

Compatibility

• To operate this version of MXW with other Shure networked systems, see the following list of recommended software and firmware versions:
  • SCM820 1.4.3
  • Shure Web Device Discovery 1.2.17
  • Shure Update Utility 2.8.6

Improvements

• Backend updates

Notes

• User Guide
• To operate this version of SLX-D with other Shure networked systems, see the following list of recommended versions:
  • Wireless Workbench 6.15.4 or 7.2.0
  • Shure Update Utility 2.8.6

Improvements

• Backend updates

Notes

• User Guide
• To operate this version of SLX-D with other Shure networked systems, see the following list of recommended versions:
  • Wireless Workbench 6.15.4 or 7.2.0
  • Shure Update Utility 2.8.6

Improvements

• Teams Mute Sync support

Notes

• User Guide
• Firmware updates for MV7+ are available in the MOTIV Mix desktop application, as well as the MOTIV mobile apps

Compatibility

• MV7+ is compatible with the following software:
  • MOTIV Mix
  • MOTIV Audio (iOS & Android)
  • MOTIV Video (iOS & Android)
• We always recommend updating to the latest software and firmware versions for the best user experience.