सॉफ्टवेयर और फर्मवेयर अभिलेखागार

NEW FEATURES

• Two assignable Digital Feedback Reduction (DFR) channels
• Additional AMX/Crestron control strings (TCPI commands).  See full documentation here.
  • Auto Link enable/disable
  • DFR: Bypass enable/disable, channel assignment, freeze/unfreeze, clear all filters

IMPROVEMENTS

• Graphical user interface usability enhancements
  • Faster load time
  • EQ enable/disable buttons

KNOWN ISSUES

• There may be issues staying connected to the GUI while using Safari on Mac OS X 10.9 Mavericks.

NOTES

• SCM820 Automatic Mixers running firmware version 1.0.11 are compatible with those running firmware version 1.1.18, but it is recommended to update all devices to the latest firmware when used together.
• The graph on the DFR tab is an approximation of the frequency response set in the DFR filter table, and may not reflect the exact values.
• For operation of SCM820 with other Shure networked systems, see the following list of minimum firmware/software versions that are supported with SCM820 version 1.1.18:
  • Microflex Wireless 1.2.5
  • Shure Update Utility 2.0.1.25
  • Shure Web Device Discovery 1.0.8

IMPORTANT: Version 1.2.5 introduces new MXW components and system functionality (details below). All MXW components must be updated to Version 1.2.5 for the MXW system to take advantage of the new features and overall system functionality.

Mixed use of MXW component versions is not supported and may result in minor loss of functionality.

These release notes cover the following models:

• MXW1/6/8
• MXWANI4/8
• MXWAPT4/8
• MXWNCS4/8

NEW FEATURES

• Support for the MXW1 Bodypack Microphone
  • Includes two separate gain controls (Internal and External)
  • The Bodypack's Auto switchover feature has been tested and verified with the following microphones:
    • Countryman E6
    • MX150 B/O-TQG
    • PG30TQG
    • WBH53B
    • WL185
    • WL93
  • The Auto setting does NOT function with the following microphones, please set the Bodypack Mic Source to External when using them:
    • Countryman E2
    • MX153 B/O-TQG
• Decreased power consumption of microphones in Standby Mode, allowing the microphones to remain in Standby longer
• Improved Spectrum Scanning channel estimates
• Improved accuracy of Battery time to empty when in Standby
• Bug fixes

KNOWN ISSUES

• MXW2 is not supported in 1.2.5
• GUI connectivity issues may arrise with systems that have been powered on and running continuously for ~20 consecutive days. Power-cycle the system to reinitialize communication. Audio and RF performance are not affected.

NOTES

• For operation of MXW devices with other Shure networked systems, see the following list of minimum software and firmware versions that are supported with MXW version 1.2.5:
  • SCM820-DAN 1.0.11
  • Shure Web Device Discovery 1.0.8

IMPORTANT: Version 1.2.5 introduces new MXW components and system functionality (details below). All MXW components must be updated to Version 1.2.5 for the MXW system to take advantage of the new features and overall system functionality.

Mixed use of MXW component versions is not supported and may result in minor loss of functionality.

These release notes cover the following models:

• MXW1/6/8
• MXWANI4/8
• MXWAPT4/8
• MXWNCS4/8

NEW FEATURES

• Support for the MXW1 Bodypack Microphone
  • Includes two separate gain controls (Internal and External)
  • The Bodypack's Auto switchover feature has been tested and verified with the following microphones:
    • Countryman E6
    • MX150 B/O-TQG
    • PG30TQG
    • WBH53B
    • WL185
    • WL93
  • The Auto setting does NOT function with the following microphones, please set the Bodypack Mic Source to External when using them:
    • Countryman E2
    • MX153 B/O-TQG
• Decreased power consumption of microphones in Standby Mode, allowing the microphones to remain in Standby longer
• Improved Spectrum Scanning channel estimates
• Improved accuracy of Battery time to empty when in Standby
• Bug fixes

KNOWN ISSUES

• MXW2 is not supported in 1.2.5
• GUI connectivity issues may arrise with systems that have been powered on and running continuously for ~20 consecutive days. Power-cycle the system to reinitialize communication. Audio and RF performance are not affected.

NOTES

• For operation of MXW devices with other Shure networked systems, see the following list of minimum software and firmware versions that are supported with MXW version 1.2.5:
  • SCM820-DAN 1.0.11
  • Shure Web Device Discovery 1.0.8

These release notes cover the following models:

• MXW6/8
• MXWANI4/8
• MXWAPT4/8
• MXWNCS4/8

NEW FEATURES

• Initial Release

KNOWN ISSUES

• MXW1, MXW2 are not supported in 1.1.9
• Users may see large fluctuations in Battery time while in Standby Mode
• GUI connectivity issues may arrise with systems that have been powered on and running continuously for ~20 consecutive days. Power-cycle the system to reinitialize communication. Audio and RF performance are not affected.

NOTES

• For operation of MXW devices with other Shure networked systems, see the following list of minimum software and firmware versions that are supported with MXW version 1.1.9:
  • SCM820-DAN 1.0.11
  • Shure Web Device Discovery 1.0.8

IMPORTANT: Version 1.2.5 introduces new MXW components and system functionality (details below). All MXW components must be updated to Version 1.2.5 for the MXW system to take advantage of the new features and overall system functionality.

Mixed use of MXW component versions is not supported and may result in minor loss of functionality.

These release notes cover the following models:

• MXW1/6/8
• MXWANI4/8
• MXWAPT4/8
• MXWNCS4/8

NEW FEATURES

• Support for the MXW1 Bodypack Microphone
  • Includes two separate gain controls (Internal and External)
  • The Bodypack's Auto switchover feature has been tested and verified with the following microphones:
    • Countryman E6
    • MX150 B/O-TQG
    • PG30TQG
    • WBH53B
    • WL185
    • WL93
  • The Auto setting does NOT function with the following microphones, please set the Bodypack Mic Source to External when using them:
    • Countryman E2
    • MX153 B/O-TQG
• Decreased power consumption of microphones in Standby Mode, allowing the microphones to remain in Standby longer
• Improved Spectrum Scanning channel estimates
• Improved accuracy of Battery time to empty when in Standby
• Bug fixes

KNOWN ISSUES

• MXW2 is not supported in 1.2.5
• GUI connectivity issues may arrise with systems that have been powered on and running continuously for ~20 consecutive days. Power-cycle the system to reinitialize communication. Audio and RF performance are not affected.

NOTES

• For operation of MXW devices with other Shure networked systems, see the following list of minimum software and firmware versions that are supported with MXW version 1.2.5:
  • SCM820-DAN 1.0.11
  • Shure Web Device Discovery 1.0.8

IMPORTANT: Version 1.2.5 introduces new MXW components and system functionality (details below). All MXW components must be updated to Version 1.2.5 for the MXW system to take advantage of the new features and overall system functionality.

Mixed use of MXW component versions is not supported and may result in minor loss of functionality.

These release notes cover the following models:

• MXW1/6/8
• MXWANI4/8
• MXWAPT4/8
• MXWNCS4/8

NEW FEATURES

• Support for the MXW1 Bodypack Microphone
  • Includes two separate gain controls (Internal and External)
  • The Bodypack's Auto switchover feature has been tested and verified with the following microphones:
    • Countryman E6
    • MX150 B/O-TQG
    • PG30TQG
    • WBH53B
    • WL185
    • WL93
  • The Auto setting does NOT function with the following microphones, please set the Bodypack Mic Source to External when using them:
    • Countryman E2
    • MX153 B/O-TQG
• Decreased power consumption of microphones in Standby Mode, allowing the microphones to remain in Standby longer
• Improved Spectrum Scanning channel estimates
• Improved accuracy of Battery time to empty when in Standby
• Bug fixes

KNOWN ISSUES

• MXW2 is not supported in 1.2.5
• GUI connectivity issues may arrise with systems that have been powered on and running continuously for ~20 consecutive days. Power-cycle the system to reinitialize communication. Audio and RF performance are not affected.

NOTES

• For operation of MXW devices with other Shure networked systems, see the following list of minimum software and firmware versions that are supported with MXW version 1.2.5:
  • SCM820-DAN 1.0.11
  • Shure Web Device Discovery 1.0.8

Important

• SW 6000 v6.0.146 is compatibel to Firmware Release 7.4.xx only.
• SW 6000 v6.0 is compatible with SW 6000 Software License v1.7 only,

Upgrading from all previous SW 6000 versions

• Upgrading from all previous SW 6000 versions is possible, but is subject to an upgrade fee
• Upgrade has to be ordered for new Software License (v1.7) in order to run this version
• Customers with older versions who have customized CDA screens cannot upgrade and maintain the previous customized CDA. If the customer wants to use v6.0, new customized screens has to be made. Version 6.0 however opens up for customers to make their own customized screens
• Version 5.8 will still be available for download on the partner section on www.dis.cc for maintenance purpose, but new orders on v5.8 will not be accepted

New Features

• New designed CDA application
• New CUA screen with information during voting on who has not yet voted
• New CUA screen with a list of delegates who has not yet logged in to the conference
• New CUA screen with expanded view of descriptions to Agenda Subjects
• Option in CUA to assign status to agenda subject (i.e. New, postponed, canceled)
• New reports and update of old reports

IMPROVEMENTS

• Added additional menu to allow for "Diversity Defeat" feature, and added visual indication of active antenna on home screen
• Added additional squelch options

NOTES

• For operation of PSM1000 devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with PSM1000 version 1.3.9:
  • Axient devices 1.13.5
  • ULX-D devices 1.3.6
  • Wireless Workbench 6 Beta version 6.8.1
  • Shure Update Utility 2.0.2

Important

V5.8.121 is only compatible with Firmware Release 7.4 or later.

Bug Fixes

• Label length in CUA adjusted
• Some voting results missing in SW 6086 Web service Interface

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.12.8:
  • UR4 UHF-R receiver 1.166
  • UR3 Plug-on Transmitter 1.0.0.9
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4 ULXD Receiver 1.2.14
  • P10T PSM1000 Transmitter 1.3.4
  • Wireless Workbench 6 Beta version 6.8.0