Software & Firmware Archives

IMPORTANT: Version 1.2.8 is a recommended patch release to fix a long-run-time bug.

These release notes cover the following models:

• MXWNCS4/8
• MXWANI4/8
• MXWAPT4/8

IMPROVEMENTS

• Fixed bug regarding lost GUI connection with other MXW networked devices after running for > 24 days.

KNOWN ISSUES

• There may be issues staying connected to the GUI while using Safari on Mac OS X 10.9 Mavericks.

NOTES

• For operation of MXW devices with other Shure networked systems, see the following list of minimum software and firmware versions that are supported with MXW version 1.2.8:
  • SCM820-DAN 1.0.11
  • Shure Web Device Discovery 1.0.8

IMPORTANT: Version 1.2.8 is a recommended patch release to fix a long-run-time bug.

These release notes cover the following models:

• MXWNCS4/8
• MXWANI4/8
• MXWAPT4/8

IMPROVEMENTS

• Fixed bug regarding lost GUI connection with other MXW networked devices after running for > 24 days.

KNOWN ISSUES

• There may be issues staying connected to the GUI while using Safari on Mac OS X 10.9 Mavericks.

NOTES

• For operation of MXW devices with other Shure networked systems, see the following list of minimum software and firmware versions that are supported with MXW version 1.2.8:
  • SCM820-DAN 1.0.11
  • Shure Web Device Discovery 1.0.8

IMPORTANT: Version 1.2.8 is a recommended patch release to fix a long-run-time bug.

These release notes cover the following models:

• MXWNCS4/8
• MXWANI4/8
• MXWAPT4/8

IMPROVEMENTS

• Fixed bug regarding lost GUI connection with other MXW networked devices after running for > 24 days.

KNOWN ISSUES

• There may be issues staying connected to the GUI while using Safari on Mac OS X 10.9 Mavericks.

NOTES

• For operation of MXW devices with other Shure networked systems, see the following list of minimum software and firmware versions that are supported with MXW version 1.2.8:
  • SCM820-DAN 1.0.11
  • Shure Web Device Discovery 1.0.8

IMPORTANT: Version 1.2.8 is a recommended patch release to fix a long-run-time bug.

These release notes cover the following models:

• MXWNCS4/8
• MXWANI4/8
• MXWAPT4/8

IMPROVEMENTS

• Fixed bug regarding lost GUI connection with other MXW networked devices after running for > 24 days.

KNOWN ISSUES

• There may be issues staying connected to the GUI while using Safari on Mac OS X 10.9 Mavericks.

NOTES

• For operation of MXW devices with other Shure networked systems, see the following list of minimum software and firmware versions that are supported with MXW version 1.2.8:
  • SCM820-DAN 1.0.11
  • Shure Web Device Discovery 1.0.8

Important

SW 6000 v6.1.73 is compatible to Firmware Release 7.5.0 or higher only.

Improvements

• Reply functionality is introduced (not supported with CU 6005/CU 6010 or CU 6011)
• Bug fixes

IMPROVEMENTS

• Added support for G10J, J8J, L8J and L11J bands for use in Japan
• Minor bug fixes

NOTES

• For operation of PSM1000 devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with PSM1000 version 1.3.12:
  • Axient devices 1.14.6
  • ULX-D Devices 1.4.18
  • Wireless Workbench 6 version 6.9.2
  • Shure Update Utility 2.0.3

Important

• ULXD4D and ULXD4Q receivers running firmware prior to 1.4.8 must be updated to 1.4.8 before updating to newer versions.
• ULXD4D and ULXD4Q receivers running firmware between 1.4.8 and 2.0.28 must be updated to 2.0.28 before updating to newer versions.
• After 2.0.28 is installed, ULXD4D and ULXD4Q receivers can be updated to the latest available firmware version.
• ULX-D devices that are downgrading to 1.5.6 may report a false failure.
  • Workaround: Because this is a false failure, closing the send updates window and going to the main page, Shure Update Utility will show green for the firmware version.

Improvements

• Interference Alert Accuracy Improvement
  • In some situations previous versions of ULX-D could falsely report Interference Alerts when interference was not actually present. This firmware release removes false reporting, but retains the ability to alert the user if interference was the reason why a particular setup lost RF signal.

Notes

• For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.4.18:
  • ULXD1/2 ULX-D Transmitters 1.4.18
  • ULXD4, ULXD4D, ULXD4Q ULX-D Receivers 1.4.18
  • AXT400 Axient Receiver 1.14.6
  • Wireless Workbench 6 version 6.9.0

Important

• ULXD4D and ULXD4Q receivers running firmware prior to 1.4.8 must be updated to 1.4.8 before updating to newer versions.
• ULXD4D and ULXD4Q receivers running firmware between 1.4.8 and 2.0.28 must be updated to 2.0.28 before updating to newer versions.
• After 2.0.28 is installed, ULXD4D and ULXD4Q receivers can be updated to the latest available firmware version.
• ULX-D devices that are downgrading to 1.5.6 may report a false failure.
  • Workaround: Because this is a false failure, closing the send updates window and going to the main page, Shure Update Utility will show green for the firmware version.

Improvements

• Interference Alert Accuracy Improvement: In some situations previous versions of ULX-D could falsely report Interference Alerts when interference was not actually present. This firmware release removes false reporting, but retains the ability to alert the user if interference was the reason why a particluar setup lost RF signal.

Notes

• For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.4.18:
  • ULXD1/2 ULX-D Transmitters 1.4.18
  • ULXD4, ULXD4D, ULXD4Q ULX-D Receivers 1.4.18
  • AXT400 Axient Receiver 1.14.6
  • Wireless Workbench 6 version 6.9.0

Improvements

• Interference Alert Accuracy Improvement
  • In some situations previous versions of ULX-D could falsely report Interference Alerts when interference was not actually present. This firmware release removes false reporting, but retains the ability to alert the user if interference was the reason why a particluar setup lost RF signal.

Notes

• After updating the ULXD4 Single Receiver from version 1.0.7, the user is required to reset the unit to Default Settings (DEVICE UTILITIES/SYSTEM RESET/RESTORE/DEFAULT SETTINGS).
• For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.4.18:
  • ULXD1/2 ULX-D Transmitters 1.4.18
  • ULXD4, ULXD4D, ULXD4Q ULX-D Receivers 1.4.18
  • AXT400 Axient Receiver 1.14.6
  • Wireless Workbench 6 version 6.9.0

Notes

• After updating the ULXD4 Single Receiver the user is required to reset the unit to Default Settings (DEVICE UTILITIES/SYSTEM RESET/RESTORE/DEFAULT SETTINGS).
• For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.4.18:
  • ULXD1/2 ULX-D Transmitters 1.4.18
  • ULXD4, ULXD4D, ULXD4Q ULX-D Receivers 1.4.18
  • AXT400 Axient Receiver 1.14.6
  • Wireless Workbench 6 version 6.9.0