Archiwum oprogramowania i firmware

These release notes cover the following models:

• MXWNCS2/4/8 Networked Chargers
• MXWANI4/8 Audio Network Interfaces
• MXWAPT2/4/8 Access Point Transceivers
• MXW1/2/6/8 Wireless Microphones

NEW FEATURES

• High Density (HD) mode doubles the number of channels available in standard mode, with minor changes to some system features, for better system performance the presence of interference from neighboring DECT wireless devices.
• PHS Detection and Exclusion is a new feature for Microflex Wireless installations in Japan. PHS is a mobile phone technology that shares frequency spectrum with the JDECT band used by Microflex Wireless. The new PHS Detection and Exclusion capabilities allow the MXW microphones and MXWAPTs to avoid PHS interference and deliver a consistent, reliable audio experience.

IMPROVEMENTS

• MXW Networked Charging Stations are consistently discovered by the Shure Update Utility in order to receive firmware updates.
• MXW devices now correctly format DHCP requests.
• MXWAPT2 devices are now discovered by the Shure Web Device Discovery app after they are rebooted or reset to their factory defaults by a Dante controller.
• MXWAPT and microphone wireless connection management enhancements added to deliver a consistent audio experience as mics approach the edge of a coverage area.
• Additional MXWAPT event logging to troubleshoot complex systems.
• Fixed an intermittent issue when MXW microphones undocked from a MXW Networked Charging Station did not start in unmuted mode when it was set to start in unmuted mode.
• MXWAPT interference detection enhanced to better recover and maintain wireless connections to microphones when other DECT devices are present.
• Enhanced MXWAPT task management and messaging queue procedures to fix unexpected behavior, such as blank Audio/RF meters and intermittent microphone connectivity, when microphones are repeatedly docked/undocked in a Crestron/AMX system.
• When changing Mute Preferences for an MXWAPT, the Active/Mute LED now correctly applies the corresponding settings.
• Fixed an intermittent issue when linked MXW microphones didn't reconnect with an MXWAPT after it exited Scan mode.
• MXW Control Software
  • A reboot option is added to MXWAPT Device Properties.
  • Users will see a warning message when modifying RF Coordination Mode so they are aware of possible interference between devices or the potential impact on MXW microphone performance.
  • Spectrum Scanner accurately displays graphs and font sizes for all languages.
  • Duplicating Dante Channel names prevented on MXWAPT devices.
  • Invalid characters in Channel Names prevented on MXWANI devices.
  • Button and label text truncation improved for all languages.

KNOWN ISSUES

• During Spectrum Scan, modifying MXWAPT configuration settings can put the device in a non-deterministic state. If configuration settings are modified during Spectrum Scan, MXWAPT must be rebooted.
• Microflex Wireless 5.1.23 is not supported by SystemOn version 2.1.

NOTES

• Microflex Wireless firmware version 5.1.23 does not support AES67.
• Dante Packet Bridge Support: A third-party Dante device (e.g. a Dante DSP) used with the MXWAPT can now obtain the MXWAPT Control IP Address through a data channel on the Dante Network, allowing greater flexibility in network architecture and setup with multiple interfaces. Learn more
• For operation of MXW version 5.1.23 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SCM820 1.3.3
  • Shure Web Device Discovery 1.0.18
  • Shure Update Utility 2.3.0.18

These release notes cover the following models:

• MXWNCS2/4/8 Networked Chargers
• MXWANI4/8 Audio Network Interfaces
• MXWAPT2/4/8 Access Point Transceivers
• MXW1/2/6/8 Wireless Microphones

NEW FEATURES

• High Density (HD) mode doubles the number of channels available in standard mode, with minor changes to some system features, for better system performance the presence of interference from neighboring DECT wireless devices.
• PHS Detection and Exclusion is a new feature for Microflex Wireless installations in Japan. PHS is a mobile phone technology that shares frequency spectrum with the JDECT band used by Microflex Wireless. The new PHS Detection and Exclusion capabilities allow the MXW microphones and MXWAPTs to avoid PHS interference and deliver a consistent, reliable audio experience.

IMPROVEMENTS

• MXW Networked Charging Stations are consistently discovered by the Shure Update Utility in order to receive firmware updates.
• MXW devices now correctly format DHCP requests.
• MXWAPT2 devices are now discovered by the Shure Web Device Discovery app after they are rebooted or reset to their factory defaults by a Dante controller.
• MXWAPT and microphone wireless connection management enhancements added to deliver a consistent audio experience as mics approach the edge of a coverage area.
• Additional MXWAPT event logging to troubleshoot complex systems.
• Fixed an intermittent issue when MXW microphones undocked from a MXW Networked Charging Station did not start in unmuted mode when it was set to start in unmuted mode.
• MXWAPT interference detection enhanced to better recover and maintain wireless connections to microphones when other DECT devices are present.
• Enhanced MXWAPT task management and messaging queue procedures to fix unexpected behavior, such as blank Audio/RF meters and intermittent microphone connectivity, when microphones are repeatedly docked/undocked in a Crestron/AMX system.
• When changing Mute Preferences for an MXWAPT, the Active/Mute LED now correctly applies the corresponding settings.
• Fixed an intermittent issue when linked MXW microphones didn't reconnect with an MXWAPT after it exited Scan mode.
• MXW Control Software
  • A reboot option is added to MXWAPT Device Properties.
  • Users will see a warning message when modifying RF Coordination Mode so they are aware of possible interference between devices or the potential impact on MXW microphone performance.
  • Spectrum Scanner accurately displays graphs and font sizes for all languages.
  • Duplicating Dante Channel names prevented on MXWAPT devices.
  • Invalid characters in Channel Names prevented on MXWANI devices.
  • Button and label text truncation improved for all languages.

KNOWN ISSUES

• During Spectrum Scan, modifying MXWAPT configuration settings can put the device in a non-deterministic state. If configuration settings are modified during Spectrum Scan, MXWAPT must be rebooted.
• Microflex Wireless 5.1.23 is not supported by SystemOn version 2.1.

NOTES

• Microflex Wireless firmware version 5.1.23 does not support AES67.
• Dante Packet Bridge Support: A third-party Dante device (e.g. a Dante DSP) used with the MXWAPT can now obtain the MXWAPT Control IP Address through a data channel on the Dante Network, allowing greater flexibility in network architecture and setup with multiple interfaces. Learn more
• For operation of MXW version 5.1.23 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SCM820 1.3.3
  • Shure Web Device Discovery 1.0.18
  • Shure Update Utility 2.3.0.18

These release notes cover the following models:

• MXWNCS2/4/8 Networked Chargers
• MXWANI4/8 Audio Network Interfaces
• MXWAPT2/4/8 Access Point Transceivers
• MXW1/2/6/8 Wireless Microphones

NEW FEATURES

• High Density (HD) mode doubles the number of channels available in standard mode, with minor changes to some system features, for better system performance the presence of interference from neighboring DECT wireless devices.
• PHS Detection and Exclusion is a new feature for Microflex Wireless installations in Japan. PHS is a mobile phone technology that shares frequency spectrum with the JDECT band used by Microflex Wireless. The new PHS Detection and Exclusion capabilities allow the MXW microphones and MXWAPTs to avoid PHS interference and deliver a consistent, reliable audio experience.

IMPROVEMENTS

• MXW Networked Charging Stations are consistently discovered by the Shure Update Utility in order to receive firmware updates.
• MXW devices now correctly format DHCP requests.
• MXWAPT2 devices are now discovered by the Shure Web Device Discovery app after they are rebooted or reset to their factory defaults by a Dante controller.
• MXWAPT and microphone wireless connection management enhancements added to deliver a consistent audio experience as mics approach the edge of a coverage area.
• Additional MXWAPT event logging to troubleshoot complex systems.
• Fixed an intermittent issue when MXW microphones undocked from a MXW Networked Charging Station did not start in unmuted mode when it was set to start in unmuted mode.
• MXWAPT interference detection enhanced to better recover and maintain wireless connections to microphones when other DECT devices are present.
• Enhanced MXWAPT task management and messaging queue procedures to fix unexpected behavior, such as blank Audio/RF meters and intermittent microphone connectivity, when microphones are repeatedly docked/undocked in a Crestron/AMX system.
• When changing Mute Preferences for an MXWAPT, the Active/Mute LED now correctly applies the corresponding settings.
• Fixed an intermittent issue when linked MXW microphones didn't reconnect with an MXWAPT after it exited Scan mode.
• MXW Control Software
  • A reboot option is added to MXWAPT Device Properties.
  • Users will see a warning message when modifying RF Coordination Mode so they are aware of possible interference between devices or the potential impact on MXW microphone performance.
  • Spectrum Scanner accurately displays graphs and font sizes for all languages.
  • Duplicating Dante Channel names prevented on MXWAPT devices.
  • Invalid characters in Channel Names prevented on MXWANI devices.
  • Button and label text truncation improved for all languages.

KNOWN ISSUES

• During Spectrum Scan, modifying MXWAPT configuration settings can put the device in a non-deterministic state. If configuration settings are modified during Spectrum Scan, MXWAPT must be rebooted.
• Microflex Wireless 5.1.23 is not supported by SystemOn version 2.1.

NOTES

• Microflex Wireless firmware version 5.1.23 does not support AES67.
• Dante Packet Bridge Support: A third-party Dante device (e.g. a Dante DSP) used with the MXWAPT can now obtain the MXWAPT Control IP Address through a data channel on the Dante Network, allowing greater flexibility in network architecture and setup with multiple interfaces. Learn more
• For operation of MXW version 5.1.23 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SCM820 1.3.3
  • Shure Web Device Discovery 1.0.18
  • Shure Update Utility 2.3.0.18

These release notes cover the following models:

• MXWNCS2/4/8 Networked Chargers
• MXWANI4/8 Audio Network Interfaces
• MXWAPT2/4/8 Access Point Transceivers
• MXW1/2/6/8 Wireless Microphones

NEW FEATURES

• High Density (HD) mode doubles the number of channels available in standard mode, with minor changes to some system features, for better system performance the presence of interference from neighboring DECT wireless devices.
• PHS Detection and Exclusion is a new feature for Microflex Wireless installations in Japan. PHS is a mobile phone technology that shares frequency spectrum with the JDECT band used by Microflex Wireless. The new PHS Detection and Exclusion capabilities allow the MXW microphones and MXWAPTs to avoid PHS interference and deliver a consistent, reliable audio experience.

IMPROVEMENTS

• MXW Networked Charging Stations are consistently discovered by the Shure Update Utility in order to receive firmware updates.
• MXW devices now correctly format DHCP requests.
• MXWAPT2 devices are now discovered by the Shure Web Device Discovery app after they are rebooted or reset to their factory defaults by a Dante controller.
• MXWAPT and microphone wireless connection management enhancements added to deliver a consistent audio experience as mics approach the edge of a coverage area.
• Additional MXWAPT event logging to troubleshoot complex systems.
• Fixed an intermittent issue when MXW microphones undocked from a MXW Networked Charging Station did not start in unmuted mode when it was set to start in unmuted mode.
• MXWAPT interference detection enhanced to better recover and maintain wireless connections to microphones when other DECT devices are present.
• Enhanced MXWAPT task management and messaging queue procedures to fix unexpected behavior, such as blank Audio/RF meters and intermittent microphone connectivity, when microphones are repeatedly docked/undocked in a Crestron/AMX system.
• When changing Mute Preferences for an MXWAPT, the Active/Mute LED now correctly applies the corresponding settings.
• Fixed an intermittent issue when linked MXW microphones didn't reconnect with an MXWAPT after it exited Scan mode.
• MXW Control Software
  • A reboot option is added to MXWAPT Device Properties.
  • Users will see a warning message when modifying RF Coordination Mode so they are aware of possible interference between devices or the potential impact on MXW microphone performance.
  • Spectrum Scanner accurately displays graphs and font sizes for all languages.
  • Duplicating Dante Channel names prevented on MXWAPT devices.
  • Invalid characters in Channel Names prevented on MXWANI devices.
  • Button and label text truncation improved for all languages.

KNOWN ISSUES

• During Spectrum Scan, modifying MXWAPT configuration settings can put the device in a non-deterministic state. If configuration settings are modified during Spectrum Scan, MXWAPT must be rebooted.
• Microflex Wireless 5.1.23 is not supported by SystemOn version 2.1.

NOTES

• Microflex Wireless firmware version 5.1.23 does not support AES67.
• Dante Packet Bridge Support: A third-party Dante device (e.g. a Dante DSP) used with the MXWAPT can now obtain the MXWAPT Control IP Address through a data channel on the Dante Network, allowing greater flexibility in network architecture and setup with multiple interfaces. Learn more
• For operation of MXW version 5.1.23 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SCM820 1.3.3
  • Shure Web Device Discovery 1.0.18
  • Shure Update Utility 2.3.0.18

Improvements

• Added support for updating the following devices:
  • IntelliMix® P300 Audio Conferencing Processor
  • ANIUSB-MATRIX
  • ANI22
  • Shure Battery Rack Charger (SBRC)
• Added support for updating the following new bands:
  • ULX-D G62, Z17, Z18, Z19, Z20
  • QLX-D Z17, Z18, Z19, Z20
• macOS Sierra (10.12) compatibility

Known Issues

• Microflex Wireless devices running version 1.X firmware must first be updated to version 2.0.5 before being updated to version 3.X or later.

Notes

• Shure Update Utility (SUU) version 2.3 requires 64-bit operating systems. To install SUU on a 32-bit computer, download version 2.2.2.8: Windows 7, 8, 10 or Mac OS X 10.9 – 10.11
• KSE1500, SHA900 and GLX-D (USB 2.0 connected devices) must be updated one at a time.
• Installing the Shure Update Utility on Windows machines will prompt the installation of a USB driver in addition to the original application. This driver must be installed to support updating USB devices, like GLX-D.
• The use of USB hubs is not recommended when performing updates to GLX-D devices. Always connect a GLX-D device directly to a USB terminal of the computer running the Shure Update Utility.
• Shure Update Utility 2.3 is compatible with the following software:
  • Wireless Workbench 6.12

Feature Release

Important

• This version is a feature release for use in systems with CU 6105, CU 6110 and DIS-CCU Central Units only
• This version cannot be used to upgrade systems using CU 6005, CU 6010 or CU 6011 Central Units
• This version can upgrade SW6000 from all previous SW6000 versions
• This version is compatible with SW6000 Software License file v1.7 only
  • If upgrading from SW6000 v6.0.xxx or later, a new SW6000 license is not needed
  • If upgrading from SW6000 v5.8.xxx or earlier, a new SW6000 license is needed

New Features

• Updated visual appearance:
  • Rebranding SW6000 from DIS to Shure
  • A general update of labels in SW6000 has been made. The most important changes are:
    • Conference -> Meeting
    • User -> Participant
    • Delegate -> Participant
    • User Type -> Meeting Role
  • The new labels will only be applied if the default English labels has not been changed. Both the legacy labels and the new labels are to be found in the folders in the SW6000 installation package
• Color scheme of the CUA and CDA is changed to match other Shure applications. A CUA configuration file (prjCUA.exe.config) with the old color scheme is to be found in the SW6000 installation package
• Change of SW6000 license structure. The number of licenses is reduced as the facilities in a number of modules has been included in the basic SW6000 software package. The new license structure will be effective after May 1st 2017.
• Support for Shure Name Sign. SW6000 does now support the Shure Name Sign for showing the name on the sign of the participant logged into a seat .
• Option to set the Manual Speech Time from the CUA. The entry field reflects the entered manual timer value as long as the CUA application is not closed

Improvements

• Optimization of showing Individual Voting and Registration results in the CUA Results view
• Performance improvements in CUA for Login/Logout including caching more participant data in CUI/CUA to speed up CUA meeting handling
• Messaging behavior updated so no participants or groups are pre-selected when opening the message view in the CUA
• Added separate labels for Agenda status. ‘Set New’ used to be hardcoded, this is now corrected
• Meeting import/export in the CAA, using either file or web service, have been redesigned to make it possible to have different customer implementations and import in different languages
• CDA ViewStateServer is now updated when seats are updated in response to a CU/CCU unit status update message.
• Improved error handling if CDA is disconnected from LAN (one CDA loosing LAN connection caused that other CDA’s might also loose connection)
• The "Delete Default” meeting button is now disabled, if no default meeting is saved
• Multiple participants can now be selected and deleted in the Participant Table
• A confirmation popup is now shown, if the user tries to close the CUA.

Bug Fixes

CUA

• where a user logged in on a CUA with no paired HW unit, with meeting mode ‘Login Using Code’ and with chip card enabled, can’t re-login on a CUA on another PC. CUI now also handles logouts from seats with no hardware on seat), allowing computer seats to log out properly
• where some Meeting Roles in CUA are empty until first meeting has been started
• with the command line parameter -CUI "Computername
• where delegates are unselected after speech time increase/decrease in microphone control
• when receiving a message in a CUA using lowest resolution (1024x768)
• when applying room setup, and the Meeting Role was not being applied to the unit
• in CUA volume control, where it was not possible to change volume levels. CUI now takes the seats active Meeting Role into account rather than computing rights based on delegate Meeting Role when sending out configuration updates. Updates related to audio setup will then also reach a CUA with a delegate receiving user rights from a secondary Meeting Role
• a memory leak error for CUA related to start/stop meeting
• preventing applying a room setup, when a meeting is running. Message box informing the user is added

CAA

• Changed three labels. If language versions other than the default English language is in use or the default English labels has been changed, the following labels shall be changed from the old values to the new values in all languages:
  • Old Values:
    • 6602 = dB
    • 6712 = dB
    • 6713 = db
  • New values:
  • 6602 = {0:+0;-0; 0} dB
  • 6712 = {0:+0;-0; 0} dB
  • 6713 = {0:+0;-0; 0} dB
• Fixed errors with
  • 6 missing group labels after DB upgrade from earlier version 4.1.x
  • language pop-up at start-up
  • apostrophe in SQL.
  • an exception when setting Manual speech time
  • a Webservice exception with very large agenda: Maximum request length exceeded. Increased the maximum post size from 4MB to 64MB
  • Interpreter Unit, language selection, which was not always update correct
  • Database Inconsistencies. A number of differences are have been identified when comparing older databases (after upgrade to 6.x) with new database generated by latest 6.x release. The differences are now corrected and included in the CAA database upgrade script, so customers will have a more smooth upgrade experience, when upgrading from pre 5.1.35 versions
  • agenda subject in ‘No Login’ meeting mode to prevent setting a delegate as Speaker for a subject
  • duplicate delegates in SQL database. Duplicate delegates are removed if there is any, when upgrading the database, keeping the oldest one (preventive action to clean up the database). Historical data is not modified. Also fixed an upgrade problem for databases without language 1033
• Fixed an error, where
  • invariant languages from the language list could be selected when creating additional languages. This caused an exception if chosen, or if the user scrolled by
  • the default custom mimic image was overwrite at a software upgrade
  • agenda subject item 1000 could not be added again after having removed one item
  • editing label group 57 shows an error when shifting between languages
  • the ‘tab’ order in the Meeting was incorrect
  • the delegate 'Replace' list included not active delegates
  • moving a participant in the delegate seat table of a meeting using the "Move" button generated an SQL exception when updating changes into database
  • labels were deleted if empty labels was imported into the default language.
  • Removed "Save settings in CU" button in CAA seat forms as this button has no functionality with DIS-CCU and CU 61xx.

CDA

• Fixed an error,
  • where the manual timer clock on CDA momentarily displays red “alarm” outline prior to next timer selection.
  • where Delegate speaker names could be empty if the new CDA command line parameter -disablepagetimer is used
  • in Individual voting results display, where delegate names sometimes are missing for meetings with large amount of delegates
  • where Latest Speaker timer is not counting on custom screen
• Minor font size changes in skin editor

CUI

• Fixed an error where the Voting weight was not always taken into account in large installations
• Fixed an error, where Voting Results are "0"s when delegates register w. chip cards during a voting session

Reports

• Meeting and voting reports has been updated to reflect delegate settings in all list type meeting types, so e.g. Meeting Role and voting weight are taken into account. Previously delegate settings was incorrectly taken from Delegate Table.
• Registration reports updated to reflect Meeting Role during list meeting types.
• Incorrect number of delegate speaker in Meeting log reports (report ID 1232/ 1451)
• Delegate Meeting reports (ID 1200) updated to reflect Meeting Role during list meeting types.
• Voting reports updated to reflect Meeting Role during list meeting types. The affected reports are: 1233, 1405, 1417, 1434, 1436, 1438, 1440, 9005 and custom reports 1444, 1445, 1446, and 1447.
• Report 'All delegate Statistical' (Report ID 1243) updated to show correct speak times.
• CAA Meeting Log reports updated to reflect Meeting Role during list meeting types. This affects reports ID 1227 (meeting login-logout) and 1232 / 1451 (meeting log)
• CAA : Correction for duplicate delegate results in Meeting Log reports, which occurred when delegates had different Meeting Roles in list type meetings (report ID 1232, 1228, 1451)
• Voting reports are missing results from proxy delegates
• Voting reports - proxy delegates are listed 5 times each

IMPORTANT

• This firmware release can be used to upgrade units in a DDS 5900 or a DCS 6000 systems using CU 5905, CU 6105, CU 6110 or DIS CCU Central Units.
• The CU 6000, CU 6005, CU 6010 and CU 6011 Central Units are not supported in this release.
• The DIS FUU Firmware Upgrade Utility, which is part of this firmware release, must be used when upgrading

NEW FEATURES

• Support of Shure Name Sign
• Support for individual microphone attenuation control in 5900 mode on the CU/CCU GUI

Important

• Update all GLX-D devices in a configuration to the same firmware version.
• To update or downgrade GLXD4 receivers, use Shure Update Utility version 2.4.3 and download the appropriate firmware.

Improvement

• Changed the version number for GLXD4/6 receivers to 2.2.5 to allow all GLX-D devices in a configuration with GLXD4R and UA846Z2 devices to have the same firmware version.

Notes

• GLX-D devices on firmware version 2.0.0.1 or higher are not compatible with earlier versions.
• If you have GLXD4 version 2.1 and update to version 2.2.5, you will not be able to downgrade back to version 2.1.
• To operate GLXD4 version 2.2.5 with other Shure software, see the following list of minimum versions:
  • GLXD1/2 Transmitters 2.2.5
  • GLX-D GLXD4/4R/6 Receivers 2.2.5
  • UA846Z2 Frequency Manager 2.2.5
  • Shure Update Utility 2.4.3

Important

Update all GLX-D devices in a configuration to the same firmware version

Improvement

• Changed the version number for GLXD4/6 receivers to 2.2.5 to allow all GLX-D devices in a configuration with GLXD4R and UA846Z2 devices to have the same firmware version.

Known Issue

• After attempting to downgrade GLX-D devices from version 2.2.5 to version 2.0.0.1, Shure Update Utility will maintain the same version number followed by an asterisk (*) and incorrectly state in the Event Log that the firmware failed to install. The firmware downgrade will actually be successful.

Notes

• GLX-D devices on firmware version 2.0.0.1 or higher are not compatible with earlier versions.
• To operate GLXD6 version 2.2.5 with other Shure software, see the following list of minimum versions:
  • GLXD1/2 Transmitters 2.2.5
  • GLXD4/4R/6 Receivers 2.2.5
  • UA846Z2 Frequency Manager 2.2.5
  • Shure Update Utility 2.3

IMPROVEMENT

• GLXD4R and UA846Z2 compatibility

NOTES

• GLX-D devices on version 2.0.0.1 or higher are not compatible with earlier versions.
• To operate GLXD1/2 Transmitters on version 2.2.5 with other Shure software, see the following list of minimum versions:
  • GLXD4 Wireless Receiver  2.0.0.1
  • GLXD4R Wireless Receiver 2.2.5
  • GLXD6 Guitar Pedal Receiver 2.0.0.1
  • UA846Z2 Frequency Manager 2.2.5
  • Shure Update Utility 2.3