Archiwum oprogramowania i firmware

Notes 

• SBC250 User Guide
• SBC450/850 User Guide
• To set up ULXD6/8 transmitters to receive firmware updates while docked in SBC250/450/850 Networked Charging Stations, follow these steps:
  1. Place transmitters on a charging station and ensure the charging station is connected to the network.
  2. Launch Shure Update Utility to find firmware updates.
  3. Download updates and select Send Updates.
• To operate this version of SBC250/450/850 with other Shure networked systems and software, see the following list of recommended versions:
  • ULX-D ULXD6/8 Transmitters and ULXD4/4D/4Q Receivers 2.6.3
  • Wireless Workbench 6.15.0
  • Shure Update Utility 2.7.1

Improvements

• Added language support for French, German, Italian, Dutch, Portuguese, Spanish, Japanese, Indonesian, and Arabic.

Improvements

• Added language support for French, German, Italian, Dutch, Portuguese, Spanish, Japanese, Indonesian, and Arabic.

Improvements

• Backend improvements

Known Issues

• When connected to iPad via a USB-C cable, the MV7 will pass audio and gain can be adjusted. However, the MOTIV apps will only display ‘external mic’, and the settings screen will not be available. Shure recommends using another device to configure the settings before using with iPad Pro. No adjustments can be made in real-time (except gain) on the Shure MOTIV apps when using an iPad Pro.

Notes

• User Guide
• Firmware updates for MV7 are available in the ShurePlus MOTIV app for iOS and Android, as well as the MOTIV Desktop application
• Shure MV7 is compatible with the following recommended software versions:
  • iOS ShurePlus MOTIV 3.6.3
  • Android ShurePlus MOTIV 3.6.0
  • iOS ShurePlus MOTIV Video 1.7.1
  • Android ShurePlus MOTIV Video 1.7.0
  • ShurePlus MOTIV for Mac and Windows 1.3.1

Improvements

• Backend improvements

Known Issues

• When connected to iPad Pro via a USB-C cable, the MV88+ will pass audio and gain can be adjusted. However, the MOTIV apps will only display ‘external mic’, and the settings screen will not be available. Shure recommends using another device to configure the settings before using with iPad Pro. No adjustments can be made in real-time (except gain) on the Shure MOTIV apps when using an iPad Pro.

Notes

• User Guide
• Firmware updates for MV88+ are available in the ShurePlus MOTIV app for iOS and Android, as well as the MOTIV Desktop application
• Shure MV88+ is compatible with the following recommended software versions:
  • iOS ShurePlus MOTIV 3.6.3
  • Android ShurePlus MOTIV 3.6.0
  • iOS ShurePlus MOTIV Video 1.7.1
  • Android ShurePlus MOTIV Video 1.7.0
  • ShurePlus MOTIV for Mac and Windows 1.3.1

These release notes cover the following models: 

• MXWNCS2/4/8 Networked Charging Stations
• MXWANI4/8 Audio Network Interfaces
• MXWAPT2/4/8 Access Point Transceivers
• MXW1/2/6/8 Wireless Microphones

Important

• Update any MXW devices which are below the minimum supported firmware 8.0.3 by using the Shure Update Utility (SUU) found here.  Please note – should the firmware version used be older than 5.2.2, it is advised to upgrade to version 5.2.2 first before updating to any subsequent more recent releases. Close the SUU when complete.

New Features

• MXW mic naming. Enables to assign a custom mic name to each individual mic via MXW Software from version 1.2 onwards. That mic name is retained by the mic and will be shown in MXW Software whenever the mic is linked to an MXW APT anywhere on the network.
• Custom Mic naming above also enabled via TPCI protocol

Improvements

• Removed the browser-based Web-UI
• Web-UI replaced by a simplified “Thin-UI” with simple network settings, still available via browser-based access for APT and NCS
• Added support for Thin UI lockout for ANI
• ACN protocol update to use a fixed port allocation for VPN access

Bug Fixes

• Fixed for all MXW components: Repetitive opening and closing of the TPCI port (2202), in excess of 250K cycles, causes TPCI port to no longer respond.

Known Issues

• Multiple Primary Leader Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet

Notes

• Related Links
  • Crestron/AMX Control Strings
  • Quick Start Guide
  • User Guide
• To operate this version of MXW with other Shure networked systems, see the following list of recommended software and firmware versions:
  • SCM820 1.4.3
  • Shure Web Device Discovery 1.2.17
  • Shure Update Utility 2.7.0
  • SystemOn 4.6.0

These release notes cover the following models: 

• MXWNCS2/4/8 Networked Charging Stations
• MXWANI4/8 Audio Network Interfaces
• MXWAPT2/4/8 Access Point Transceivers
• MXW1/2/6/8 Wireless Microphones

Important

• Update any MXW devices which are below the minimum supported firmware 8.0.3 by using the Shure Update Utility (SUU) found here.  Please note – should the firmware version used be older than 5.2.2, it is advised to upgrade to version 5.2.2 first before updating to any subsequent more recent releases. Close the SUU when complete.

New Features

• MXW mic naming. Enables to assign a custom mic name to each individual mic via MXW Software from version 1.2 onwards. That mic name is retained by the mic and will be shown in MXW Software whenever the mic is linked to an MXW APT anywhere on the network.
• Custom Mic naming above also enabled via TPCI protocol

Improvements

• Removed the browser-based Web-UI
• Web-UI replaced by a simplified “Thin-UI” with simple network settings, still available via browser-based access for APT and NCS
• Added support for Thin UI lockout for ANI
• ACN protocol update to use a fixed port allocation for VPN access

Bug Fixes

• Fixed for all MXW components: Repetitive opening and closing of the TPCI port (2202), in excess of 250K cycles, causes TPCI port to no longer respond.

Known Issues

• Multiple Primary Leader Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet

Notes

• Related Links
  • Crestron/AMX Control Strings
  • Quick Start Guide
  • User Guide
• To operate this version of MXW with other Shure networked systems, see the following list of recommended software and firmware versions:
  • SCM820 1.4.3
  • Shure Web Device Discovery 1.2.17
  • Shure Update Utility 2.7.0
  • SystemOn 4.6.0

These release notes cover the following models: 

• MXWNCS2/4/8 Networked Charging Stations
• MXWANI4/8 Audio Network Interfaces
• MXWAPT2/4/8 Access Point Transceivers
• MXW1/2/6/8 Wireless Microphones

Important

• Update any MXW devices which are below the minimum supported firmware 8.0.3 by using the Shure Update Utility (SUU) found here.  Please note – should the firmware version used be older than 5.2.2, it is advised to upgrade to version 5.2.2 first before updating to any subsequent more recent releases. Close the SUU when complete.

New Features

• MXW mic naming. Enables to assign a custom mic name to each individual mic via MXW Software from version 1.2 onwards. That mic name is retained by the mic and will be shown in MXW Software whenever the mic is linked to an MXW APT anywhere on the network.
• Custom Mic naming above also enabled via TPCI protocol

Improvements

• Removed the browser-based Web-UI
• Web-UI replaced by a simplified “Thin-UI” with simple network settings, still available via browser-based access for APT and NCS
• Added support for Thin UI lockout for ANI
• ACN protocol update to use a fixed port allocation for VPN access

Bug Fixes

• Fixed for all MXW components: Repetitive opening and closing of the TPCI port (2202), in excess of 250K cycles, causes TPCI port to no longer respond.

Known Issues

• Multiple Primary Leader Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet

Notes

• Related Links
  • Crestron/AMX Control Strings
  • Quick Start Guide
  • User Guide
• To operate this version of MXW with other Shure networked systems, see the following list of recommended software and firmware versions:
  • SCM820 1.4.3
  • Shure Web Device Discovery 1.2.17
  • Shure Update Utility 2.7.0
  • SystemOn 4.6.0

These release notes cover the following models: 

• MXWNCS2/4/8 Networked Charging Stations
• MXWANI4/8 Audio Network Interfaces
• MXWAPT2/4/8 Access Point Transceivers
• MXW1/2/6/8 Wireless Microphones

Important

• Update any MXW devices which are below the minimum supported firmware 8.0.3 by using the Shure Update Utility (SUU) found here.  Please note – should the firmware version used be older than 5.2.2, it is advised to upgrade to version 5.2.2 first before updating to any subsequent more recent releases. Close the SUU when complete.

New Features

• MXW mic naming. Enables to assign a custom mic name to each individual mic via MXW Software from version 1.2 onwards. That mic name is retained by the mic and will be shown in MXW Software whenever the mic is linked to an MXW APT anywhere on the network.
• Custom Mic naming above also enabled via TPCI protocol

Improvements

• Removed the browser-based Web-UI
• Web-UI replaced by a simplified “Thin-UI” with simple network settings, still available via browser-based access for APT and NCS
• Added support for Thin UI lockout for ANI
• ACN protocol update to use a fixed port allocation for VPN access

Bug Fixes

• Fixed for all MXW components: Repetitive opening and closing of the TPCI port (2202), in excess of 250K cycles, causes TPCI port to no longer respond.

Known Issues

• Multiple Primary Leader Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet

Notes

• Related Links
  • Crestron/AMX Control Strings
  • Quick Start Guide
  • User Guide
• To operate this version of MXW with other Shure networked systems, see the following list of recommended software and firmware versions:
  • SCM820 1.4.3
  • Shure Web Device Discovery 1.2.17
  • Shure Update Utility 2.7.0
  • SystemOn 4.6.0

These release notes cover the following models: 

• MXWNCS2/4/8 Networked Charging Stations
• MXWANI4/8 Audio Network Interfaces
• MXWAPT2/4/8 Access Point Transceivers
• MXW1/2/6/8 Wireless Microphones

Important

• Update any MXW devices which are below the minimum supported firmware 8.0.3 by using the Shure Update Utility (SUU) found here.  Please note – should the firmware version used be older than 5.2.2, it is advised to upgrade to version 5.2.2 first before updating to any subsequent more recent releases. Close the SUU when complete.

New Features

• MXW mic naming. Enables to assign a custom mic name to each individual mic via MXW Software from version 1.2 onwards. That mic name is retained by the mic and will be shown in MXW Software whenever the mic is linked to an MXW APT anywhere on the network.
• Custom Mic naming above also enabled via TPCI protocol

Improvements

• Removed the browser-based Web-UI
• Web-UI replaced by a simplified “Thin-UI” with simple network settings, still available via browser-based access for APT and NCS
• Added support for Thin UI lockout for ANI
• ACN protocol update to use a fixed port allocation for VPN access

Bug Fixes

• Fixed for all MXW components: Repetitive opening and closing of the TPCI port (2202), in excess of 250K cycles, causes TPCI port to no longer respond.

Known Issues

• Multiple Primary Leader Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet

Notes

• Related Links
  • Crestron/AMX Control Strings
  • Quick Start Guide
  • User Guide
• To operate this version of MXW with other Shure networked systems, see the following list of recommended software and firmware versions:
  • SCM820 1.4.3
  • Shure Web Device Discovery 1.2.17
  • Shure Update Utility 2.7.0
  • SystemOn 4.6.0