Archiwum oprogramowania i firmware

NEW FEATURES

• Support for third party control interfaces
  • The AXT400 Receiver and AXT900 Rack Charger can be monitored and controlled via command strings. The firmware update enables these devices to be controlled with programmable interfaces such as AMX and Crestron.
  • The technical bulletin which documents the command strings can be found here: http://shure.custhelp.com/app/answers/detail/a_id/...
• Frequency Diversity-Bodypack source indicator
  • When operating in Frequency Diversity-Bodypack mode, the AXT400 receiver now indicates which of the two RF channels is currently selected by the FD switching algorithm as the active source for the audio outputs of the receiver. The indicator ‘On’ appears beneath the ‘FD-Bp’ icon on the front panel display for the active RF channel and the same information is available in the WWB6 Properties Panel and Channel Strip for the receiver. The indicator facilitates troubleshooting if there is an acoustic problem with a microphone.

KNOWN ISSUES

• The Unexpected Transmitter alert function is disabled when Interference Avoidance is set to ‘Off’. Unexpected Transmitter alert is a separate function from Interference Detection which alerts when signal is received from an Axient or UHF-R transmitter that is not linked to the receiver.
• When controlling Axient devices with command strings, only a single socket should be opened per device.

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.9.2:
  • UR4 UHF-R receiver 1.166
  • UR3 Plug-on Transmitter 1.0.0.9
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4x ULX-D Receivers 1.2.14
  • P10T PSM1000 Transmitter 1.3.4
  • Wireless Workbench 6 Beta version 6.4.0 Beta

IMPROVEMENTS

• Improved ShowLink connectivity in environments with high Wi Fi activity
  • Transmitter remote control link is maintained under higher ratios of Wi Fi traffic to ShowLink messages, resulting in fewer instances of transmitters falling offline.

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.9.2:
  • UR4 UHF-R receiver 1.166
  • UR3 Plug-on Transmitter 1.0.0.9
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4 ULXD Receiver 1.2.14
  • P10T PSM1000 Transmitter 1.3.4
  • Wireless Workbench 6 Beta version 6.4.0 Beta

IMPROVEMENTS

• Improved ShowLink connectivity in environments with high Wi Fi activity
  • Transmitter remote control link is maintained under higher ratios of Wi Fi traffic to ShowLink messages, resulting in fewer instances of transmitters falling offline.

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.9.2:
  • UR4 UHF-R receiver 1.166
  • UR3 Plug-on Transmitter 1.0.0.9
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4 ULXD Receiver 1.2.14
  • P10T PSM1000 Transmitter 1.3.4
  • Wireless Workbench 6 Beta version 6.4.0

Improvements

• Fixed an IR Syncing issue with certain screen brightness settings

Known Issues

• Custom group creation from Wireless Workbench may be limited to certain channel counts for the following bands (NOTE: not an issue when editing custom groups from the front panel of the receiver)
  • AB
  • JA
  • JB
  • Q51
  • R51
  • X50

Notes

• For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.0.7:
  • ULXD1/2 ULXD Transmitters 1.0.3
  • ULXD4 ULX-D Receivers 1.0.7
  • Wireless Workbench 6 Beta version 6.2.1

IMPROVEMENTS

• Improved IR sync protocol
• Added support for X2 band

NOTES

• For operation of PSM1000 devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with PSM1000 version 1.3.2:
  • Axient devices 1.9.2
  • ULX-D devices 1.0.7
  • Wireless Workbench 6 Beta version 6.4.0

Improvements

• Added support for X2 band for use in Korea

Notes

• For operation of PSM1000 devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with PSM1000 version 1.3.4:
  • Axient devices 1.8.8
  • ULX-D devices 1.0.3
  • Wireless Workbench 6 Beta version 6.3.0

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.8.8:
  • UR4 UHF-R receiver - 1.166
  • UR3 Plug-on Transmitter - 1.0.0.9
  • UR5 Portable Diversity Receiver - 1.0.0.13
  • ULXD4 ULXD Receiver - 1.0.3
  • P10T PSM1000 Transmitter - 1.3.4 Beta
  • Wireless Workbench - 6.3.0 Beta

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.8.8:
  • UR4 UHF-R receiver - 1.166
  • UR3 Plug-on Transmitter - 1.0.0.9
  • UR5 Portable Diversity Receiver - 1.0.0.13
  • ULXD4 ULXD Receiver - 1.0.3
  • P10T PSM1000 Transmitter - 1.3.4 Beta
  • Wireless Workbench - 6.3.0 Beta

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.8.8:
  • UR4 UHF-R receiver - 1.166
  • UR3 Plug-on Transmitter - 1.0.0.9
  • UR5 Portable Diversity Receiver - 1.0.0.13
  • ULXD4 ULXD Receiver - 1.0.3
  • P10T PSM1000 Transmitter - 1.3.4 Beta
  • Wireless Workbench - 6.3.0 Beta

NEW FEATURES

• Support for the following Axient receiver variants: AXT400B, AXT400C

IMPROVEMENTS

• Improved Front Panel Lock feature, allows some menu navigation to view settings while not allowing changes to parameters.

KNOWN ISSUES

• The old P10T firmware for production (v1.1.0) is not interoperable with the minimum Beta version (v1.3.1) that supports the networked features of Spectrum Manager and Wireless Workbench 6. When using the Axient Spectrum Manager and/or Wireless Workbench 6 with PSM1000, all P10T transmitter units to be used in the same network configuration must be updated to version 1.3.4 (which is available to download from within Wireless Workbench 6). Use the Firmware Update Manager Tool in Wireless Workbench 6 to update P10T transmitters and enable network discovery and programming with Wireless Workbench 6 and Spectrum Manager.

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.8.8:
  • UR4 UHF-R receiver - 1.166
  • UR3 Plug-on Transmitter - 1.0.0.9
  • UR5 Portable Diversity Receiver - 1.0.0.13
  • ULXD4 ULXD Receiver - 1.0.3
  • P10T PSM1000 Transmitter - 1.3.4 Beta
  • Wireless Workbench - 6.3.0 Beta