Software & Firmware Archives

IMPROVEMENTS

• Improved ShowLink connectivity in environments with high Wi Fi activity
  • Transmitter remote control link is maintained under higher ratios of Wi Fi traffic to ShowLink messages, resulting in fewer instances of transmitters falling offline.

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.9.2:
  • UR4 UHF-R receiver 1.166
  • UR3 Plug-on Transmitter 1.0.0.9
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4 ULXD Receiver 1.2.14
  • P10T PSM1000 Transmitter 1.3.4
  • Wireless Workbench 6 Beta version 6.4.0

Version 5.6.41 is compatible to Firmware Release 6.8.9 only and is not compatible with previous firmware versions

New Features

• CDA, Mic display: Group Speech Time is updated to display Group Abbreviation OR Group depending on
• CDA configuration in CAA: Setup / Configuration / CDA configuration / Microphone Display options.
• (Previously only Group was possible).
• CDA, Mic display: Speech time limit for the group can be displayed if selected.
• General: Group Abbreviation expanded to 7 characters.
• CAA: Updated to handle Group Abbreviations with up to 7 characters when importing a meeting.
• ECA: Support for Speech time alarm/time expired status

Bug fixes

• CAA: Russian error after adding 2'nd language
• CAA: Reports problem with unicode/ Georgian error
• CAA: WEB service setup -TAB order is incorrect
• CAA: Disabling "External Validation" for seat inserts DBNull instead of 0 in database
• CAA: Cannot delete AO + AM units
• CUA, AO control screen: Volume controls missing in
• CUA: Blank screen when conference is started or stopped
• CUA: Mimic exception fault
• CUA: Pre-recorded message list are not updated during a meeting
• CAA: Adding a new message causes the last delegate to be highlighted
• CUA: Exception - when adjusting mic volume on mimic
• CUA: Mimic error when starting/stopping conference
• CUA: Mimic and use of "show secondary User Type" user type
• CUA: Exception - after adding long pre-recorded messages
• CUA: Object ref. error / exception when adjusting volume
• CUA: Mimic "login window" are not closed, when conference is closed
• CUA: Message scroll bar is jumping a lot
• CUA: IS "mic on" control from technician mimic. cause "object ref. not set...." error
• CUA: Mic attenuation on volume control page has wrong values
• CUA: Exception when closing conference
• CUA: mimic "out of memory" exception
• CDA Indv. Results: Total Voting results missing
• CDA: Not showing interim results at some voting screens
• Changing CUA user type mess up first voting
• Units with No login capabilities (NO CUA or CC) are not logged in
• Alert message to be defined when secret voting selected
• Object ref not set - error "91"
• Installation errors 5.6.31 framework 3.5
• Error when removing chip cards
• "Overwrite message?" dialog when delegates log out
• Close mic on speech timeout not working
• Operator '=' is not defined for type 'DBNull' and type 'DUALUNIT

New Features

• Showing of voting cast in secret voting implemented in CAA, CDA, CUA mimic and in voting reports
• CAA "Agenda subject configuration" added
• Secondary speech timer when main timer is paused
• ‘One speech/Subject’
• Request time limit
• New CUA resolutions min 1280 x 800
• Changed CUA resolution, min 1920x1200 changed to min 1920x1080
• “Request List Closed” shown if the request list is closed manually
• Reset request time function
• Win Installation log can be viewed after installation
• CUI improvements when handling STF
• SW versions added in CUI log files
• Warning when user is trying to overwrite backup file

Bug Fix

• Voting report (Individual) corrected (results and labels)
• DC 6990P configured as dual units cannot logout
• CDA speech time error in Groups and 'header' font type
• Voting graph configuration: Not possible to set CDA/CUA voting width
• CDA remaining voting time are drifting away from CUA
• Chairman in not identified as chairman, when Secondary seat is used
• Improvements when using replacing mic. function in CAA setup equipment, conference units menu
• Error in CDA Mimic, when showing interpreter language, corrected

Improvements

• Fixed an IR Syncing issue with certain screen brightness settings

Known Issues

• Custom group creation from Wireless Workbench may be limited to certain channel counts for the following bands (NOTE: not an issue when editing custom groups from the front panel of the receiver)
  • AB
  • JA
  • JB
  • Q51
  • R51
  • X50

Notes

• For operation of ULX-D devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with ULX-D version 1.0.7:
  • ULXD1/2 ULXD Transmitters 1.0.3
  • ULXD4 ULX-D Receivers 1.0.7
  • Wireless Workbench 6 Beta version 6.2.1

IMPROVEMENTS

• Improved IR sync protocol
• Added support for X2 band

NOTES

• For operation of PSM1000 devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with PSM1000 version 1.3.2:
  • Axient devices 1.9.2
  • ULX-D devices 1.0.7
  • Wireless Workbench 6 Beta version 6.4.0

Improvements

• Added support for X2 band for use in Korea

Notes

• For operation of PSM1000 devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with PSM1000 version 1.3.4:
  • Axient devices 1.8.8
  • ULX-D devices 1.0.3
  • Wireless Workbench 6 Beta version 6.3.0

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.8.8:
  • UR4 UHF-R receiver - 1.166
  • UR3 Plug-on Transmitter - 1.0.0.9
  • UR5 Portable Diversity Receiver - 1.0.0.13
  • ULXD4 ULXD Receiver - 1.0.3
  • P10T PSM1000 Transmitter - 1.3.4 Beta
  • Wireless Workbench - 6.3.0 Beta

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.8.8:
  • UR4 UHF-R receiver - 1.166
  • UR3 Plug-on Transmitter - 1.0.0.9
  • UR5 Portable Diversity Receiver - 1.0.0.13
  • ULXD4 ULXD Receiver - 1.0.3
  • P10T PSM1000 Transmitter - 1.3.4 Beta
  • Wireless Workbench - 6.3.0 Beta

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.8.8:
  • UR4 UHF-R receiver - 1.166
  • UR3 Plug-on Transmitter - 1.0.0.9
  • UR5 Portable Diversity Receiver - 1.0.0.13
  • ULXD4 ULXD Receiver - 1.0.3
  • P10T PSM1000 Transmitter - 1.3.4 Beta
  • Wireless Workbench - 6.3.0 Beta

NEW FEATURES

• Support for the following Axient receiver variants: AXT400B, AXT400C

IMPROVEMENTS

• Improved Front Panel Lock feature, allows some menu navigation to view settings while not allowing changes to parameters.

KNOWN ISSUES

• The old P10T firmware for production (v1.1.0) is not interoperable with the minimum Beta version (v1.3.1) that supports the networked features of Spectrum Manager and Wireless Workbench 6. When using the Axient Spectrum Manager and/or Wireless Workbench 6 with PSM1000, all P10T transmitter units to be used in the same network configuration must be updated to version 1.3.4 (which is available to download from within Wireless Workbench 6). Use the Firmware Update Manager Tool in Wireless Workbench 6 to update P10T transmitters and enable network discovery and programming with Wireless Workbench 6 and Spectrum Manager.

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.8.8:
  • UR4 UHF-R receiver - 1.166
  • UR3 Plug-on Transmitter - 1.0.0.9
  • UR5 Portable Diversity Receiver - 1.0.0.13
  • ULXD4 ULXD Receiver - 1.0.3
  • P10T PSM1000 Transmitter - 1.3.4 Beta
  • Wireless Workbench - 6.3.0 Beta