सॉफ्टवेयर और फर्मवेयर अभिलेखागार

NEW FEATURES

• Hold Audio Overload indicators on front panel metering
  • Optional feature available in receiver Audio settings. Holds the red LED indicator on after an overload event so that it can be identified on the front panel meters after the condition has ended
  • Residual Overload indicators can be cleared from the front panel with the following key combination: ENTER + AUDIO on the home screen menu for the channel that had an overload.
  • Indicators can also be cleared from WWB6.
• Extended range of receiver Squelch setting, the selectable range is -20 to +10 (previously -10 to +10). Lower settings allow for increased operating range without squelch muting when operating on frequencies with low RF noise.
• Hardware Identification in WWB6
  • Enables the user to trigger a flashing sequence from the physical device to locate the Wireless Workbench 6 representation of that device in the software.
  • To engage, quickly tap the power button on the transmitter.

IMPROVEMENTS

• AXT400 B receiver supports new transmitter bands including J5HK, G12, and H12
• Calibration of front panel display, may optimize contrast on some units

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.11.14:
  • UR4 UHF-R receiver 1.166
  • UR3 Plug-on Transmitter 1.0.0.9
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4x ULX-D Receivers 1.2.14
  • P10T PSM1000 Transmitter 1.3.4
  • Wireless Workbench 6 Beta version 6.6.0

NEW FEATURES

• Hardware Identification in WWB6
  • Enables the user to trigger a flashing sequence from the physical device to locate the Wireless Workbench 6 representation of that device in the software.
  • To engage, quickly tap the power button on the transmitter.

IMPROVEMENTS

• AXT400 B receiver supports new transmitter bands including J5HK, G12, and H12

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.11.14:
  • UR4 UHF-R receiver 1.166
  • UR3 Plug-on Transmitter 1.0.0.9
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4 ULXD Receiver 1.2.14
  • P10T PSM1000 Transmitter 1.3.4
  • Wireless Workbench 6 Beta version 6.6.0

NEW FEATURES

• Hardware Identification in WWB6
  • Enables the user to trigger a flashing sequence from the physical device to locate the Wireless Workbench 6 representation of that device in the software.
  • To engage, quickly tap the power button on the transmitter.

IMPROVEMENTS

• AXT400 B receiver supports new transmitter bands including J5HK, G12, and H12

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.11.14:
  • UR4 UHF-R receiver 1.166
  • UR3 Plug-on Transmitter 1.0.0.9
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4 ULXD Receiver 1.2.14
  • P10T PSM1000 Transmitter 1.3.4
  • Wireless Workbench 6 Beta version 6.6.0

Important

V5.8.78 is compatible with Firmware Release 7.2.0 or later only

New Features

• Support for SW 7085 Web Casting Software
• SW 6086 Protocol expanded
• Shure/DIS identity emphesized - graphical changes

Bug Fix

Search error in 'Delegate List' in the CUA/Microphone screen corrected

IMPROVEMENTS

• Added support for X7 band
• Minor bug fixes

NOTES

• For operation of PSM1000 devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with PSM1000 version 1.3.7:
  • Axient devices 1.13.5
  • ULX-D devices 1.3.6
  • Wireless Workbench 6 Beta version 6.6.0

Important

V5.8.66 is compatible with Firmware Release 7.2.0 or later only

New Features

• Supports for 1-5 voting button on CUA Application and DC 6990 P
• SW 6125 Advanced Speech Time Module now support showing of Group Speech Time Summary in CUA-Microphone Screen

Important

• V5.8.48 is compatible with Firmware Release 7.1.0 only
• SW 6000 support for Win XP is discontinued and any Win XP specific errors will not be corrected. No tests has been conducted on Win XP.

New Features

• New designed CUI interface with choice of TCP/IP connection for CU 6105 / CU 6110 or RS232 connection for to CU 6005 / CU 6010 / CU 6011
• New designed CUA Volume Control page corresponding to the CU 6105 Central Unit

SW 6132 Advanced Import/Export Module expansion:

• Conference import/export using WebService (CAA)
• Conference import/export mode selection: XML file or WebService

SW 6112 Advanced Agenda Control expansion:

• Hyper Links in CAA Agenda Subjects
• Hyper Links in CUA Agenda Subjects
• Browser in CUA

Improvements & bug fixes

• Manual typed voting result: 'Attendance/Totalpresent values not shown correctly and not included in the quorum formula
• Enhanced detection of pre- installed database during installation
• Upgrade from .NET 3.5 to .NET 4.0
• Notorious improvements, corrections and bug fixes

Note

Viewing PDF and Word documents in CUA

If the PC is using 64-bit operating system, a 64-bit PDF and Word viewer must be used or the document will not open inside the CUA.

• PDF-XChange viewer is recommended and can be used for both 32- and 64-bit PCs
• To easily detect CUs, install Bonjour before initial CUI configuration. Get Bonjour at http://support.apple.com/kb/DL999?viewlocale=en_US

Important

• V5.8.48 is compatible with Firmware Release 7.1.0 only
• SW 6000 support for Win XP is discontinued and any Win XP specific errors will not be corrected. No tests has been conducted on Win XP.

New Features

• New designed CUI interface with choice of TCP/IP connection for CU 6105 / CU 6110 or RS232 connection for to CU 6005 / CU 6010 / CU 6011
• New designed CUA Volume Control page corresponding to the CU 6105 Central Unit

SW 6132 Advanced Import/Export Module expansion:

• Conference import/export using WebService (CAA)
• Conference import/export mode selection: XML file or WebService

SW 6112 Advanced Agenda Control expansion:

• Hyper Links in CAA Agenda Subjects
• Hyper Links in CUA Agenda Subjects
• Browser in CUA

Improvements & bug fixes

• Manual typed voting result: 'Attendance/Totalpresent values not shown correctly and not included in the quorum formula
• Enhanced detection of pre- installed database during installation
• Upgrade from .NET 3.5 to .NET 4.0
• Notorious improvements, corrections and bug fixes

Note

Viewing PDF and Word documents in CUA

If the PC is using 64-bit operating system, a 64-bit PDF and Word viewer must be used or the document will not open inside the CUA.

• PDF-XChange viewer is recommended and can be used for both 32- and 64-bit PCs
• To easily detect CUs, install Bonjour before initial CUI configuration. Get Bonjour at http://support.apple.com/kb/DL999?viewlocale=en_US

KNOWN ISSUES

• When controlling Axient devices with command Strings, only a single socket should be opened per device.

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.10.2:
  • UR4 UHF-R receiver 1.166
  • UR3 Plug-on Transmitter 1.0.0.9
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4 ULXD Receiver 1.2.14
  • P10T PSM1000 Transmitter 1.3.4
  • Wireless Workbench 6 Beta version 6.5.0 Beta

NOTES

• For operation of Axient devices with other Shure networked systems, see the following list of minimum firmware versions that are supported with Axient version 1.10.2:
  • UR4 UHF-R receiver 1.166
  • UR3 Plug-on Transmitter 1.0.0.9
  • UR5 Portable Diversity Receiver 1.0.0.13
  • ULXD4 ULXD Receiver 1.2.14
  • P10T PSM1000 Transmitter 1.3.4
  • Wireless Workbench 6 Beta version 6.5.0