Archiwum oprogramowania i firmware

Initial Release

Known Issues

• When connected to iPad via a USB-C cable, the MV7 will pass audio and gain can be adjusted. However, the MOTIV apps will only display ‘external mic’, and the settings screen will not be available. Shure recommends using another device to configure the settings before using with iPad Pro. No adjustments can be made in real time (except gain) on the Shure MOTIV apps when using an iPad Pro.

Notes

• User Guide
• Shure MV7 is compatible with the following software versions:
  • iOS ShurePlus MOTIV 3.0.2
  • Android ShurePlus MOTIV 3.0.2
  • iOS ShurePlus MOTIV Video 1.3.1
  • Android ShurePlus MOTIV Video 1.3.0
  • ShurePlus MOTIV for Mac and Windows 1.0.9

Improvement

• Added support for ShurePlus MOTIV for Mac and Windows

Bug Fixes

• Fixed an issue where Windows reported the wrong gain setting when the device was connected
• Fixed an issue where the microphone wouldn’t remain muted when the bit depth was changed

Known Issues

• Users with some Android devices may experience 9 millisecond audio dropouts when recording with the MV88+
• When connected to iPad via a USB-C cable, the MV88+ will pass audio and gain can be adjusted. However, the MOTIV apps will only display ‘external mic’, and the settings screen will not be available. Shure recommends using another device to configure the settings before using with iPad Pro. No adjustments can be made in real time (except gain) on the Shure MOTIV apps when using an iPad Pro.

Notes

• User Guide
• Firmware updates for MV88+ are available in the ShurePlus MOTIV app for Mac, Windows, iOS and Android

Improvements

• Improved network management capabilities for Shure Control Applications

Known Issue 

• SBC250/450/850 devices are not compatible with SystemOn 2.0-3.0.1

Notes

• SBC250 User Guide
• SBC450/850 User Guide
• To set up ULXD6/8 transmitters to receive firmware updates while docked in SBC250/450/850 Networked Charging Stations, follow these steps:
  1. Place transmitters on a charging station and ensure the charging station is connected to the network.
  2. Launch Shure Update Utility to find firmware updates.
  3. Download updates and select Send Updates.
• To operate SBC250/450/850 version 2.4.13 with other Shure networked systems and software, see the following list of minimum versions:
  • ULX-D ULXD6/8 Transmitters and ULXD4/4D/4Q Receivers 2.4.9
  • QLX-D QLXD4 Receivers 2.3.22
  • Wireless Workbench 6.13.3
  • Shure Update Utility 2.4.8
  • ShurePlus Channels 1.4.2

Bug Fix

• Fixed an issue where the settings were not set correctly for transmitters operating HD mode in the Japan frequency bands

Notes

• User Guide
• To operate ULX-D version 2.4.13 devices with other Shure networked systems and software, see the following list of minimum versions:
  • ULX-D ULXD4/4D/4Q Receivers 2.4.9
  • QLX-D QLXD1/2 Transmitters and QLXD4 Receivers 2.3.22
  • Axient AXT600 Spectrum Manager 2.1.31
  • Wireless Workbench 6.13.3
  • Shure Update Utility 2.4.8
  • ShurePlus Channels 1.4.2

Release notes cover the following models:

• MXC605
• MXC605-F
• MXC615
• MXC620/620-F
• MXC630/630-F
• MXC640
• MXCIC
• MXCMIU
• MXCSIGN
• DIS-CCU
• DC5900F
• DC5980P

Important

• This firmware release can be used to update Microflex Complete (MXC) or DCS 6000 systems using DIS-CCUCentral Unit and to update DC5900F and DC5980P to register and work in an MXC system.
• Systems using CU 5905, CU 6000, CU 6005, CU 6010, CU 6011, CU 6105, or CU 6110 Central Units are not supported in this release.
• The Firmware Update Utility (FUU) included in this release, is required for the update.

New Features

• This is a hotfix – no new features. Refer to release note for Release 9.0.0 for description of new features.

Bug Fixes

• Incorrect Default CCU-database when upgrading a former 5900-system (2000 m cable instead of default 1000m) leading to communication problems using short feeding cables.
• Updating of CCU from 8.6.2 (in 5900-mode) must force 6000-mode LAN configuration

Known Issues

• Refer to the release notes for Release 9.0.0 for description of known issues.

Notes 

• MXC and DCS 6000 firmware files are packaged together in the same release file.
• To operate MXC devices with version 9.0 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SW6000 9.0.13
  • Shure NFC Programming App 1.0.3

Improvements

• Improved pairing experience
• Improved connection speed
• Improved battery reporting
• Bug fixes

Notes

• User guide
• Firmware updates will be available in the ShurePlus PLAY app

Bug Fixes

• Fixed an issue where some transmitters receive repeated RCAS command messages
• Fixed an issue where Axient Digital receivers would erroneously show a “?” battery status for Q5X transmitters
• Fixed an issue where Axient Digital receivers would incorrectly report Q5X transmitter audio as “Unknown”

Known Issues

• AD4 receivers indicate “Ready” status for a transmitter firmware update while the transmitter is in Standby mode, but the update will immediately fail.
• IR Sync may fail while loading custom groups to Q5X transmitters
• When operating Wireless Workbench or ShurePlus Channels, some labels and icons for Q5X transmitters may be missing

Notes

• This firmware is compatible with Q5X AquaMic™ and PlayerMic®
• To install Q5X firmware on devices:
  • Download Q5X 1.2.54 firmware from Shure Update Utility (user guide)
  • Connect to the AD4D or AD4Q receiver, and in the Hosted Tx section, select Q5XTx 1.2.54
  • Send the update to the receiver
  • Use IR Sync to update the transmitter firmware
• AD4D and AD4Q can only host one transmitter firmware image at a time; if you also need to update Axient Digital transmitters, please repeat the above process, but select an ADTx firmware version.
• To operate Q5X AquaMic™ and Q5X PlayerMic® version 1.2.54 with other Shure systems and software, see the following list of minimum versions:
  • AD4D 1.2.83
  • AD4Q 1.2.83
  • Wireless Workbench 6.13.3
  • ShurePlus Channels 1.4.2
  • Shure Update Utility 2.4.8
• Distributed by Shure, AquaMic™, PlayerMic® and MicCommander™ are Q5X products. For support and service, please visit www.q5x.com.

Improvements

• Added support for new RF bands

Bug Fixes

• Fixed issues with Axient Digital-enabled Q5X wireless transmitters:
• Fixed an issue with the battery display
• Fixed an issue where AD4 receivers incorrectly reported mute status
• Fixed an issue where transmitters status is shown as “Ready” for firmware update when on Standby mode
• Fixed an issue where the transmitter fails to sync while loading custom groups

Notes

• User Guide
• Command Strings
• We recommend updating all devices used together to the same firmware version.
• To operate AD4Q version 1.2.83 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 and ADX1/1M/2 Transmitters 1.2.83
  • Axient Digital AD4D/Q Receivers 1.2.83
  • Axient AXT600 Spectrum Manager 2.1.31
  • SBRC Shure Battery Rack Charger 1.1.5
  • Shure Update Utility 2.4.8
  • ShurePlus Channels 1.4.2
  • Wireless Workbench 6.13.3

Improvements

• Added support for new RF bands

Bug Fixes

• Fixed issues with Axient Digital-enabled Q5X wireless transmitters:
  • Fixed an issue with the battery display
  • Fixed an issue where AD4 receivers incorrectly reported mute status
  • Fixed an issue where transmitters status is shown as “Ready” for firmware update when on Standby mode
  • Fixed an issue where the transmitter fails to sync while loading custom groups

Notes

• User Guide
• Command Strings
• We recommend updating all devices used together to the same firmware version.
• To operate AD4D version 1.2.83 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 and ADX1/1M/2 Transmitters 1.2.83
  • Axient Digital AD4D/Q Receivers 1.2.83
  • Axient AXT600 Spectrum Manager 2.1.31
  • SBRC Shure Battery Rack Charger 1.1.5
  • Shure Update Utility 2.4.8
  • ShurePlus Channels 1.4.2
  • Wireless Workbench 6.13.3

Improvements

• Support for G56 AD3 band variants for Indonesia and Vietnam
• Support for G55 and K53 AD3 band variants for Brazil

Notes

• User Guides: AD1 | AD2 | ADX1 | ADX1M | ADX2 | ADX2FD
• We recommend updating all devices used together to the same firmware version.
• To operate AD1/2 and ADX1/1M/2 version 1.2.83 devices with other Shure systems and software, see the following list of minimum versions:
• Axient Digital AD1/2 and ADX1/1M/2 Transmitters 1.2.83
• Axient Digital AD4D/Q Receivers 1.2.83
• Axient AXT600 Spectrum Manager 2.1.31
• SBC240/840/840M Chargers 1.2.73
• SBRC Shure Battery Rack Charger 1.1.5
• Shure Update Utility 2.4.8
• ShurePlus Channels 1.4.2
• Wireless Workbench 6.13.3