Archiwum oprogramowania i firmware

These release notes cover the following models:

• MXWNCS2/4/8 Networked Charging Stations
• MXWANI4/8 Audio Network Interfaces
• MXWAPT2/4/8 Access Point Transceivers
• MXW1/2/6/8 Wireless Microphones

Related Links

• Crestron/AMX Control Strings
• Quick Start Guide
• User Guide

Improvements

• DDM Support: This release will add support for Audinate’s Dante Domain Manager (DDM) to the MXWAPT2/4/8. Please see updated user manuals for details on operating MXWAPTs within DDM controlled audio networks. Notes:
  1. This release will NOT add support for DDM to the MXWANI4/8.
  2. If Dante Pin Lock is enabled within the DDM interface, local changes to the APT (via the web based MXW user interface or “Web-GUI”) will not be permitted
  3. If Dante Pin Lock is enabled the Device Reset Button on the APT will be disabled
• Improvements of spectrum-scan algorithm: Spectrum Scans (across all DECT RF-Bands, including J-DECT, UPCS etc.) carried out on a locally installed APT via the Web-GUI will now result in a more accurate statement of how many microphone channels are available in the scanned location.
• Security Improvement: Before an MXW device is permitted to carry out a factory-reset, the administrator password needs to be entered into the user interface.

Bug Fixes

• APT Web-GUI: Microphones with older firmware are not shown in the web-GUI - FIXED

Known Issue

• Multiple Grand Master Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
• Repetitive opening and closing of the TPCI port (2202), in excess of 250K cycles, causes TPCI port to no longer respond.

Notes

• To operate MXW version 9.0.4 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SCM820 1.3.3
  • Shure Web Device Discovery 1.2.9
  • Shure Update Utility 2.4.8
  • SystemOn 3.2

These release notes cover the following models:

• MXWNCS2/4/8 Networked Charging Stations
• MXWANI4/8 Audio Network Interfaces
• MXWAPT2/4/8 Access Point Transceivers
• MXW1/2/6/8 Wireless Microphones

Related Links

• Crestron/AMX Control Strings
• Quick Start Guide
• User Guide

Improvements

• DDM Support: This release will add support for Audinate’s Dante Domain Manager (DDM) to the MXWAPT2/4/8. Please see updated user manuals for details on operating MXWAPTs within DDM controlled audio networks. Notes:
  1. This release will NOT add support for DDM to the MXWANI4/8.
  2. If Dante Pin Lock is enabled within the DDM interface, local changes to the APT (via the web based MXW user interface or “Web-GUI”) will not be permitted
  3. If Dante Pin Lock is enabled the Device Reset Button on the APT will be disabled
• Improvements of spectrum-scan algorithm: Spectrum Scans (across all DECT RF-Bands, including J-DECT, UPCS etc.) carried out on a locally installed APT via the Web-GUI will now result in a more accurate statement of how many microphone channels are available in the scanned location.
• Security Improvement: Before an MXW device is permitted to carry out a factory-reset, the administrator password needs to be entered into the user interface.

Bug Fixes

• APT Web-GUI: Microphones with older firmware are not shown in the web-GUI - FIXED

Known Issue

• Multiple Grand Master Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
• Repetitive opening and closing of the TPCI port (2202), in excess of 250K cycles, causes TPCI port to no longer respond.

Notes

• To operate MXW version 9.0.4 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SCM820 1.3.3
  • Shure Web Device Discovery 1.2.9
  • Shure Update Utility 2.4.8
  • SystemOn 3.2

These release notes cover the following models:

• MXWNCS2/4/8 Networked Charging Stations
• MXWANI4/8 Audio Network Interfaces
• MXWAPT2/4/8 Access Point Transceivers
• MXW1/2/6/8 Wireless Microphones

Related Links

• Crestron/AMX Control Strings
• Quick Start Guide
• User Guide

Improvements

• DDM Support: This release will add support for Audinate’s Dante Domain Manager (DDM) to the MXWAPT2/4/8. Please see updated user manuals for details on operating MXWAPTs within DDM controlled audio networks. Notes:
  1. This release will NOT add support for DDM to the MXWANI4/8.
  2. If Dante Pin Lock is enabled within the DDM interface, local changes to the APT (via the web based MXW user interface or “Web-GUI”) will not be permitted
  3. If Dante Pin Lock is enabled the Device Reset Button on the APT will be disabled
• Improvements of spectrum-scan algorithm: Spectrum Scans (across all DECT RF-Bands, including J-DECT, UPCS etc.) carried out on a locally installed APT via the Web-GUI will now result in a more accurate statement of how many microphone channels are available in the scanned location.
• Security Improvement: Before an MXW device is permitted to carry out a factory-reset, the administrator password needs to be entered into the user interface.

Bug Fixes

• APT Web-GUI: Microphones with older firmware are not shown in the web-GUI - FIXED

Known Issue

• Multiple Grand Master Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
• Repetitive opening and closing of the TPCI port (2202), in excess of 250K cycles, causes TPCI port to no longer respond.

Notes

• To operate MXW version 9.0.4 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SCM820 1.3.3
  • Shure Web Device Discovery 1.2.9
  • Shure Update Utility 2.4.8
  • SystemOn 3.2

These release notes cover the following models:

• MXWNCS2/4/8 Networked Charging Stations
• MXWANI4/8 Audio Network Interfaces
• MXWAPT2/4/8 Access Point Transceivers
• MXW1/2/6/8 Wireless Microphones

Related Links

• Crestron/AMX Control Strings
• Quick Start Guide
• User Guide

Improvements

• DDM Support: This release will add support for Audinate’s Dante Domain Manager (DDM) to the MXWAPT2/4/8. Please see updated user manuals for details on operating MXWAPTs within DDM controlled audio networks. Notes:
  1. This release will NOT add support for DDM to the MXWANI4/8.
  2. If Dante Pin Lock is enabled within the DDM interface, local changes to the APT (via the web based MXW user interface or “Web-GUI”) will not be permitted
  3. If Dante Pin Lock is enabled the Device Reset Button on the APT will be disabled
• Improvements of spectrum-scan algorithm: Spectrum Scans (across all DECT RF-Bands, including J-DECT, UPCS etc.) carried out on a locally installed APT via the Web-GUI will now result in a more accurate statement of how many microphone channels are available in the scanned location.
• Security Improvement: Before an MXW device is permitted to carry out a factory-reset, the administrator password needs to be entered into the user interface.

Bug Fixes

• APT Web-GUI: Microphones with older firmware are not shown in the web-GUI - FIXED

Known Issue

• Multiple Grand Master Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
• Repetitive opening and closing of the TPCI port (2202), in excess of 250K cycles, causes TPCI port to no longer respond.

Notes

• To operate MXW version 9.0.4 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SCM820 1.3.3
  • Shure Web Device Discovery 1.2.9
  • Shure Update Utility 2.4.8
  • SystemOn 3.2

These release notes cover the following models:

• MXWNCS2/4/8 Networked Charging Stations
• MXWANI4/8 Audio Network Interfaces
• MXWAPT2/4/8 Access Point Transceivers
• MXW1/2/6/8 Wireless Microphones

Related Links

• Crestron/AMX Control Strings
• Quick Start Guide
• User Guide

Improvements

• DDM Support: This release will add support for Audinate’s Dante Domain Manager (DDM) to the MXWAPT2/4/8. Please see updated user manuals for details on operating MXWAPTs within DDM controlled audio networks. Notes:
  1. This release will NOT add support for DDM to the MXWANI4/8.
  2. If Dante Pin Lock is enabled within the DDM interface, local changes to the APT (via the web based MXW user interface or “Web-GUI”) will not be permitted
  3. If Dante Pin Lock is enabled the Device Reset Button on the APT will be disabled
• Improvements of spectrum-scan algorithm: Spectrum Scans (across all DECT RF-Bands, including J-DECT, UPCS etc.) carried out on a locally installed APT via the Web-GUI will now result in a more accurate statement of how many microphone channels are available in the scanned location.
• Security Improvement: Before an MXW device is permitted to carry out a factory-reset, the administrator password needs to be entered into the user interface.

Bug Fixes

• APT Web-GUI: Microphones with older firmware are not shown in the web-GUI - FIXED

Known Issue

• Multiple Grand Master Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
• Repetitive opening and closing of the TPCI port (2202), in excess of 250K cycles, causes TPCI port to no longer respond.

Notes

• To operate MXW version 9.0.4 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SCM820 1.3.3
  • Shure Web Device Discovery 1.2.9
  • Shure Update Utility 2.4.8
  • SystemOn 3.2

These release notes cover the following models:

• MXWNCS2/4/8 Networked Charging Stations
• MXWANI4/8 Audio Network Interfaces
• MXWAPT2/4/8 Access Point Transceivers
• MXW1/2/6/8 Wireless Microphones

Related Links

• Crestron/AMX Control Strings
• Quick Start Guide
• User Guide

Improvements

• DDM Support: This release will add support for Audinate’s Dante Domain Manager (DDM) to the MXWAPT2/4/8. Please see updated user manuals for details on operating MXWAPTs within DDM controlled audio networks. Notes:
  1. This release will NOT add support for DDM to the MXWANI4/8.
  2. If Dante Pin Lock is enabled within the DDM interface, local changes to the APT (via the web based MXW user interface or “Web-GUI”) will not be permitted
  3. If Dante Pin Lock is enabled the Device Reset Button on the APT will be disabled
• Improvements of spectrum-scan algorithm: Spectrum Scans (across all DECT RF-Bands, including J-DECT, UPCS etc.) carried out on a locally installed APT via the Web-GUI will now result in a more accurate statement of how many microphone channels are available in the scanned location.
• Security Improvement: Before an MXW device is permitted to carry out a factory-reset, the administrator password needs to be entered into the user interface.

Bug Fixes

• APT Web-GUI: Microphones with older firmware are not shown in the web-GUI - FIXED

Known Issue

• Multiple Grand Master Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
• Repetitive opening and closing of the TPCI port (2202), in excess of 250K cycles, causes TPCI port to no longer respond.

Notes

• To operate MXW version 9.0.4 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SCM820 1.3.3
  • Shure Web Device Discovery 1.2.9
  • Shure Update Utility 2.4.8
  • SystemOn 3.2

These release notes cover the following models:

• MXWNCS2/4/8 Networked Charging Stations
• MXWANI4/8 Audio Network Interfaces
• MXWAPT2/4/8 Access Point Transceivers
• MXW1/2/6/8 Wireless Microphones

Related Links

• Crestron/AMX Control Strings
• Quick Start Guide
• User Guide

Improvements

• DDM Support: This release will add support for Audinate’s Dante Domain Manager (DDM) to the MXWAPT2/4/8. Please see updated user manuals for details on operating MXWAPTs within DDM controlled audio networks. Notes:
  1. This release will NOT add support for DDM to the MXWANI4/8.
  2. If Dante Pin Lock is enabled within the DDM interface, local changes to the APT (via the web based MXW user interface or “Web-GUI”) will not be permitted
  3. If Dante Pin Lock is enabled the Device Reset Button on the APT will be disabled
• Improvements of spectrum-scan algorithm: Spectrum Scans (across all DECT RF-Bands, including J-DECT, UPCS etc.) carried out on a locally installed APT via the Web-GUI will now result in a more accurate statement of how many microphone channels are available in the scanned location.
• Security Improvement: Before an MXW device is permitted to carry out a factory-reset, the administrator password needs to be entered into the user interface.

Bug Fixes

• APT Web-GUI: Microphones with older firmware are not shown in the web-GUI - FIXED

Known Issue

• Multiple Grand Master Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
• Repetitive opening and closing of the TPCI port (2202), in excess of 250K cycles, causes TPCI port to no longer respond.

Notes

• To operate MXW version 9.0.4 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SCM820 1.3.3
  • Shure Web Device Discovery 1.2.9
  • Shure Update Utility 2.4.8
  • SystemOn 3.2

Release notes cover the following models:

• MXC605
• MXC605-F
• MXC615
• MXC620/620-F
• MXC630/630-F
• MXC640
• MXCIC
• MXCMIU
• MXCSIGN
• DIS-CCU
• DC5900F
• DC5980P

Important

• This firmware release can be used to update Microflex Complete (MXC) or DCS 6000 systems using DIS-CCU Central Unit and to update DC5900F and DC5980P to register and work in an MXC system.
• Systems using CU 5905, CU 6000, CU 6005, CU 6010, CU 6011, CU 6105, or CU 6110 Central Units are not supported in this release.
• The Firmware Update Utility (FUU) included in this release, is required to make the update.

New Features

• DIS-CCU  
  • MXC605 support – as delegate, chairman, ambient and interpreter
  • MXC605-F support – as delegate, chairman and ambient
  • DC5980P support for use in MXC system – as delegate, chairman and interpreter
    • Meeting role (Delegate/Chairman) is set in DIS-CCU  -  change "on-the-fly"
    • Left button is configured in DIS-CCU
      • Delegate: No function or Mute
      • Chairman: No function or All delegates off
  • DC5900F support for use in MXC system – as delegate and chairman
    • Meeting role (Delegate/Chairman) is set in DIS-CCU  -  change "on-the-fly"
  • Auto registration/selection of MXC VOX mode vs 6000 VOX mode. If 5900/6000 units are present, voice activation mode will be 6000 VOX mode, otherwise it will be MXC VOX mode
  • Comply with California’s IoT Law
  • Global and UI language options expanded with Catalan and Basque
  • System change option between 5900 and 6000 mode removed
  • FL6000 license included as default
• MXC Conference Units
  • Support for Speak button “Delegate speak button lock”
  • Support for Speak button "Press and hold"
  • UI language options expanded with Catalan and Basque
• MXCIC
  • Option to show agenda
  • Option to enable/disable the audio beeps for hearing protection
  • Mic LED button behavior to indicate selected outgoing channels status
• TCPI
  • 'mic_mute_all’ command included

Bug Fixes

• MXC Conference units
  • MXC VOX mode: Pressing Mute should prevent gating on own MIC
• MXC630-F 
  • Wrong indication in 'Abstain' button
• MXC640
  • Fixed LED control when a dual unit is both in speak list and request list
  • Present/seats value = 2000 was cut off on right side, and only 200 was shown
  • Home screen and FW upgrade screen images are changed
• MXCMIU
  • Individual microphone Level was not persistent across unit and CCU reset
• MXCIC 
  • Long participant names were not updating on Speakers page
• TPCI 
  • Individual vote state was missing a space char before button_id
  • Mic_speech_time_alarm repeats multiple times for alarm for each unit
  • Mix-minus state info was not correct
• Legacy 6000 units
  • VOX settings not kept after reboot

Known Issues

• MXC640
  • Manually entered voting results are not shown if a normal voting session has not been started first
  • The agenda subject name for a manually entered result may be wrong
  • It is not possible to use an MXC640 configured as dual delegate with SW6000 if the use of NFC cards is enabled

Notes

• MXC and DCS 6000 firmware files are packaged together in the same release file.
• To operate MXC devices using version 9.0 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SW6000 v9.0
  • Shure NFC Programming App 1.0.3

Initial Release

Notes

• User guide
• To operate SLX-D version 1.0.5 devices with other Shure networked systems, see the following list of supported minimum versions:
  • Wireless Workbench 6.13.3 (virtual device and coordination only)
  • Shure Update Utility 2.4.8

Initial Release

Notes

• User guide
• To operate SLX-D version 1.0.5 devices with other Shure networked systems, see the following list of supported minimum versions:
  • Wireless Workbench 6.13.3 (virtual device and coordination only)
  • Shure Update Utility 2.4.8