Archiwum oprogramowania i firmware

These release notes cover the following models:

• MXWNCS2/4/8 Networked Charging Stations
• MXWANI4/8 Audio Network Interfaces
• MXWAPT2/4/8 Access Point Transceivers
• MXW1/2/6/8 Wireless Microphones

Related Links

• Crestron/AMX Control Strings
• Quick Start Guide
• User Guide

Improvements

• Implementation of additional security features, including expanded password capabilities
• MXW devices now advertise Dante/AES67 capability in the Shure Web Device Discovery Application
• New Device Reboot button added to the MXWANI Web UI.
• Improvements to the microphones’ out-of-range detection capabilities when moved outside the wireless coverage area of the MXWAPT.

Japan-specific improvements:

• J-DECT update: Microflex Wireless now features up to 96 channels in HD mode to meet J-DECT requirements, adding additional channels (dependent on modes and interference) as well as an improved handling of PHS presence.

In areas with no PHS interference, the new maximum channel capacity is: 

However, when PHS interference is present, the maximum number of channels changes to:

Important Note: For customers in Japan that have an existing MXW installation, a unique, one-off update procedure must be performed to take advantage of these additional microphone channels. Without this procedure, the other improvements mentioned above will still take effect but without the J-DECT update. This procedure needs to be conducted onsite by Shure personnel — please contact your local Shure representative for details.

Bug Fixes

• APT2 is not discovered by Shure Device Discovery app following a reboot or factory reset using Dante Controller
• Spectrum scan on an MXW-APT no longer responsive after Density-Mode change
• Spectrum scan calculation of available channels in a given RF environment shows wrong results
• Mics lose pairing after Density-Mode change
• MXW8: Carrier mismatch strings not being shown in selected language

Known Issues

• SystemOn 3.0.1 is compatible with MXW 8.0.3, but will incorrectly warn “Check system requirements, your current firmware version may not be confirmed compatible.”
• Multiple Grand Master Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
• MXWAPT8:  MCU/GUI - Older firmware microphones are not shown in Utility tab

Notes

• To operate MXW version 8.0.3 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SCM820 1.3.3
  • Shure Web Device Discovery 1.2.5Shure Update Utility 2.4.6
  • SystemOn 3.2

These release notes cover the following models:

• MXWNCS2/4/8 Networked Charging Stations
• MXWANI4/8 Audio Network Interfaces
• MXWAPT2/4/8 Access Point Transceivers
• MXW1/2/6/8 Wireless Microphones

Related Links

• Crestron/AMX Control Strings
• Quick Start Guide
• User Guide

Improvements

• Implementation of additional security features, including expanded password capabilities
• MXW devices now advertise Dante/AES67 capability in the Shure Web Device Discovery Application
• New Device Reboot button added to the MXWANI Web UI.
• Improvements to the microphones’ out-of-range detection capabilities when moved outside the wireless coverage area of the MXWAPT.

Japan-specific improvements:

• J-DECT update: Microflex Wireless now features up to 96 channels in HD mode to meet J-DECT requirements, adding additional channels (dependent on modes and interference) as well as an improved handling of PHS presence.

In areas with no PHS interference, the new maximum channel capacity is: 

However, when PHS interference is present, the maximum number of channels changes to:

Important Note: For customers in Japan that have an existing MXW installation, a unique, one-off update procedure must be performed to take advantage of these additional microphone channels. Without this procedure, the other improvements mentioned above will still take effect but without the J-DECT update. This procedure needs to be conducted onsite by Shure personnel — please contact your local Shure representative for details.

Bug Fixes

• APT2 is not discovered by Shure Device Discovery app following a reboot or factory reset using Dante Controller
• Spectrum scan on an MXW-APT no longer responsive after Density-Mode change
• Spectrum scan calculation of available channels in a given RF environment shows wrong results
• Mics lose pairing after Density-Mode change
• MXW8: Carrier mismatch strings not being shown in selected language

Known Issues

• SystemOn 3.0.1 is compatible with MXW 8.0.3, but will incorrectly warn “Check system requirements, your current firmware version may not be confirmed compatible.”
• Multiple Grand Master Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
• MXWAPT8:  MCU/GUI - Older firmware microphones are not shown in Utility tab

Notes

• To operate MXW version 8.0.3 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SCM820 1.3.3
  • Shure Web Device Discovery 1.2.5Shure Update Utility 2.4.6
  • SystemOn 3.2

These release notes cover the following models:

• MXWNCS2/4/8 Networked Charging Stations
• MXWANI4/8 Audio Network Interfaces
• MXWAPT2/4/8 Access Point Transceivers
• MXW1/2/6/8 Wireless Microphones

Related Links

• Crestron/AMX Control Strings
• Quick Start Guide
• User Guide

Improvements

• Implementation of additional security features, including expanded password capabilities
• MXW devices now advertise Dante/AES67 capability in the Shure Web Device Discovery Application
• New Device Reboot button added to the MXWANI Web UI.
• Improvements to the microphones’ out-of-range detection capabilities when moved outside the wireless coverage area of the MXWAPT.

Japan-specific improvements:

• J-DECT update: Microflex Wireless now features up to 96 channels in HD mode to meet J-DECT requirements, adding additional channels (dependent on modes and interference) as well as an improved handling of PHS presence.

In areas with no PHS interference, the new maximum channel capacity is: 

However, when PHS interference is present, the maximum number of channels changes to:

Important Note: For customers in Japan that have an existing MXW installation, a unique, one-off update procedure must be performed to take advantage of these additional microphone channels. Without this procedure, the other improvements mentioned above will still take effect but without the J-DECT update. This procedure needs to be conducted onsite by Shure personnel — please contact your local Shure representative for details.

Bug Fixes

• APT2 is not discovered by Shure Device Discovery app following a reboot or factory reset using Dante Controller
• Spectrum scan on an MXW-APT no longer responsive after Density-Mode change
• Spectrum scan calculation of available channels in a given RF environment shows wrong results
• Mics lose pairing after Density-Mode change
• MXW8: Carrier mismatch strings not being shown in selected language

Known Issues

• SystemOn 3.0.1 is compatible with MXW 8.0.3, but will incorrectly warn “Check system requirements, your current firmware version may not be confirmed compatible.”
• Multiple Grand Master Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
• MXWAPT8:  MCU/GUI - Older firmware microphones are not shown in Utility tab

Notes

• To operate MXW version 8.0.3 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SCM820 1.3.3
  • Shure Web Device Discovery 1.2.5Shure Update Utility 2.4.6
  • SystemOn 3.2

These release notes cover the following models:

• MXWNCS2/4/8 Networked Charging Stations
• MXWANI4/8 Audio Network Interfaces
• MXWAPT2/4/8 Access Point Transceivers
• MXW1/2/6/8 Wireless Microphones

Related Links

• Crestron/AMX Control Strings
• Quick Start Guide
• User Guide

Improvements

• Implementation of additional security features, including expanded password capabilities
• MXW devices now advertise Dante/AES67 capability in the Shure Web Device Discovery Application
• New Device Reboot button added to the MXWANI Web UI.
• Improvements to the microphones’ out-of-range detection capabilities when moved outside the wireless coverage area of the MXWAPT.

Japan-specific improvements:

• J-DECT update: Microflex Wireless now features up to 96 channels in HD mode to meet J-DECT requirements, adding additional channels (dependent on modes and interference) as well as an improved handling of PHS presence.

In areas with no PHS interference, the new maximum channel capacity is: 

However, when PHS interference is present, the maximum number of channels changes to:

Important Note: For customers in Japan that have an existing MXW installation, a unique, one-off update procedure must be performed to take advantage of these additional microphone channels. Without this procedure, the other improvements mentioned above will still take effect but without the J-DECT update. This procedure needs to be conducted onsite by Shure personnel — please contact your local Shure representative for details.

Bug Fixes

• APT2 is not discovered by Shure Device Discovery app following a reboot or factory reset using Dante Controller
• Spectrum scan on an MXW-APT no longer responsive after Density-Mode change
• Spectrum scan calculation of available channels in a given RF environment shows wrong results
• Mics lose pairing after Density-Mode change
• MXW8: Carrier mismatch strings not being shown in selected language

Known Issues

• SystemOn 3.0.1 is compatible with MXW 8.0.3, but will incorrectly warn “Check system requirements, your current firmware version may not be confirmed compatible.”
• Multiple Grand Master Clocks in Dante Controller might appear with mix of AES67 enabled on an MXW-APT as well as an Axient-Digital system on the same subnet
• MXWAPT8:  MCU/GUI - Older firmware microphones are not shown in Utility tab

Notes

• To operate MXW version 8.0.3 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SCM820 1.3.3
  • Shure Web Device Discovery 1.2.5Shure Update Utility 2.4.6
  • SystemOn 3.2

New Features

• Support for new bands
• IR Preset Support for P10R+ parameters

Bug Fixes

• Resolved a bug that caused the BAL ST and BAL MX IR presets to not be applied.
• Resolved a bug that caused a mix to be replaced rather than added when setting up CueMode
• Enforcement of Access Control via Wireless Workbench to devices with remote connection has been fixed

Notes

• User Guide
• To operate PSM1000 devices version 1.7.6 with other Shure networked systems, see the following list of supported minimum versions:
  • AXT600 2.1.22
  • Axient Digital 1.2.34
  • ULX-D 2.4.9
  • Wireless Workbench 6.13.1
  • Shure Update Utility 2.4.6
  • ShurePlus Channels 1.4.2

New Features

• Support for new bands
• IR Preset Support for P10R+ parameters

Improvements

• Improved squelch performance
• Improved P10R+ scanning algorithm provides more accurate scan data
• Volume lock was updated to remain persistent after a power cycle. Added a user control to set volume lock on and off
• Removed pan control from the home screen when operating in stereo mode
• Volume Limiter is now set to OFF when restored to its factory default settings

Bug Fixes

• Resolved a bug that caused the BAL ST and BAL MX IR presets to not be applied.
• Resolved a bug that caused a mix to be replaced rather than added when setting up CueMode
• Updated the behavior of some live audio parameter changes so they are all applied immediately, with the exception of volume lock
• Updated POWER SAVE MODE so it clears internal state after a channel or group scan is performed, which resolves a bug that could cause IR sync mismatches
• Updated Channel Scan and Group Scan so it clears after cancellation, which resolves a bug that could cause the home screen to not update according to its current operating frequency

Notes

• User Guide
• To operate PSM1000 devices version 1.7.6 with other Shure networked systems, see the following list of supported minimum versions:
  • AXT600 2.1.22
  • Axient Digital 1.2.34
  • ULX-D 2.4.9
  • Wireless Workbench 6.13.1
  • Shure Update Utility 2.4.6
  • ShurePlus Channels 1.4.2

Improvements

• Bug fixes

Notes

• User Guide
• To operate SBC840M version 1.2.34 with other Shure devices and software, see the following list of minimum versions:
  • Shure Update Utility 2.4.6
  • Wireless Workbench 6.13.1

Improvements

• Bug fixes

Notes

• User Guide
• To operate SBC840 version 1.2.34 with other Shure devices and software, see the following list of minimum versions:
  • Shure Update Utility 2.4.6
  • Wireless Workbench 6.13.1

Improvements

• Bug fixes

Notes

• User Guides: SBC220 | SBC240
• To operate SBC220 or SBC240 version 1.2.34 with other Shure devices and software, see the following list of minimum versions:
  • Shure Update Utility 2.4.6
  • Wireless Workbench 6.13.1

Improvements

• Updated the firmware version number for the purpose of keeping all Axient Digital firmware version numbers aligned for brand-new system installations

Notes

• User Guide
• To operate AD610 version 1.2.34 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 and ADX1/1M/2 Transmitters 1.2.34
  • Axient Digital AD4D/Q Receivers 1.2.34
  • Axient AXT400 Receiver 2.1.11
  • Axient AXT100/200 2.1.11
  • SBRC Shure Battery Rack Charger 1.1.5
  • Shure Update Utility 2.4.6
  • ShurePlus Channels 1.4.2
  • Wireless Workbench 6.13.1