Archiwum oprogramowania i firmware

New Features

• Support for new bands
• IR Preset Support for P10R+ parameters

Bug Fixes

• Resolved a bug that caused the BAL ST and BAL MX IR presets to not be applied.
• Resolved a bug that caused a mix to be replaced rather than added when setting up CueMode
• Enforcement of Access Control via Wireless Workbench to devices with remote connection has been fixed

Notes

• User Guide
• To operate PSM1000 devices version 1.7.6 with other Shure networked systems, see the following list of supported minimum versions:
  • AXT600 2.1.22
  • Axient Digital 1.2.34
  • ULX-D 2.4.9
  • Wireless Workbench 6.13.1
  • Shure Update Utility 2.4.6
  • ShurePlus Channels 1.4.2

New Features

• Support for new bands
• IR Preset Support for P10R+ parameters

Improvements

• Improved squelch performance
• Improved P10R+ scanning algorithm provides more accurate scan data
• Volume lock was updated to remain persistent after a power cycle. Added a user control to set volume lock on and off
• Removed pan control from the home screen when operating in stereo mode
• Volume Limiter is now set to OFF when restored to its factory default settings

Bug Fixes

• Resolved a bug that caused the BAL ST and BAL MX IR presets to not be applied.
• Resolved a bug that caused a mix to be replaced rather than added when setting up CueMode
• Updated the behavior of some live audio parameter changes so they are all applied immediately, with the exception of volume lock
• Updated POWER SAVE MODE so it clears internal state after a channel or group scan is performed, which resolves a bug that could cause IR sync mismatches
• Updated Channel Scan and Group Scan so it clears after cancellation, which resolves a bug that could cause the home screen to not update according to its current operating frequency

Notes

• User Guide
• To operate PSM1000 devices version 1.7.6 with other Shure networked systems, see the following list of supported minimum versions:
  • AXT600 2.1.22
  • Axient Digital 1.2.34
  • ULX-D 2.4.9
  • Wireless Workbench 6.13.1
  • Shure Update Utility 2.4.6
  • ShurePlus Channels 1.4.2

Improvements

• Bug fixes

Notes

• User Guide
• To operate SBC840M version 1.2.34 with other Shure devices and software, see the following list of minimum versions:
  • Shure Update Utility 2.4.6
  • Wireless Workbench 6.13.1

Improvements

• Bug fixes

Notes

• User Guide
• To operate SBC840 version 1.2.34 with other Shure devices and software, see the following list of minimum versions:
  • Shure Update Utility 2.4.6
  • Wireless Workbench 6.13.1

Improvements

• Bug fixes

Notes

• User Guides: SBC220 | SBC240
• To operate SBC220 or SBC240 version 1.2.34 with other Shure devices and software, see the following list of minimum versions:
  • Shure Update Utility 2.4.6
  • Wireless Workbench 6.13.1

Improvements

• Updated the firmware version number for the purpose of keeping all Axient Digital firmware version numbers aligned for brand-new system installations

Notes

• User Guide
• To operate AD610 version 1.2.34 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 and ADX1/1M/2 Transmitters 1.2.34
  • Axient Digital AD4D/Q Receivers 1.2.34
  • Axient AXT400 Receiver 2.1.11
  • Axient AXT100/200 2.1.11
  • SBRC Shure Battery Rack Charger 1.1.5
  • Shure Update Utility 2.4.6
  • ShurePlus Channels 1.4.2
  • Wireless Workbench 6.13.1

Improvements

• Support for RF band Z16 (Japan): 1240 MHz – 1260 MHz
• Support for G56 (Indonesia, limited to 10mW)

Notes

• User Guide
• Command Strings
• AD4Q version 1.2.34 is compatible with AD4Q devices on version 1.2.34 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate AD4Q version 1.2.34 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 and ADX1/1M/2 Transmitters 1.2.34
  • Axient Digital AD4D/Q Receivers 1.2.34
  • Axient AXT600 Spectrum Manager 2.1.22
  • SBRC Shure Battery Rack Charger 1.1.5
  • Shure Update Utility 2.4.6
  • ShurePlus Channels 1.4.2
  • Wireless Workbench 6.13.1

Improvements

• Support for RF band Z16 (Japan): 1240 MHz – 1260 MHz
• Support for G56 (Indonesia, limited to 10mW)

Bug Fix

• Fixed talk switch support for the AES53 output

Notes

• User Guide
• Command Strings
• AD4D version 1.2.34 is compatible with AD4D devices on version 1.2.34 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate AD4D version 1.2.34 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 and ADX1/1M/2 Transmitters 1.2.34
  • Axient Digital AD4D/Q Receivers 1.2.34
  • Axient AXT600 Spectrum Manager 2.1.22
  • SBRC Shure Battery Rack Charger 1.1.5
  • Shure Update Utility 2.4.6
  • ShurePlus Channels 1.4.2

Improvements

• Support for RF band Z16 (Japan): 1240 MHz – 1260 MHz
• Support for G56 (Indonesia, limited to 10mW)

Notes

• User Guides: AD1 | AD2 | ADX1 | ADX1M | ADX2 | ADX2FD
• AD1/2 and ADX1/1M/2 version 1.2.34 is compatible with devices on version 1.2.34 and below, but it is recommended to update all devices used together to the same firmware version.
• To operate AD1/2 and ADX1/1M/2 version 1.2.34 devices with other Shure systems and software, see the following list of minimum versions:
  • Axient Digital AD1/2 and ADX1/1M/2 Transmitters 1.2.34
  • Axient Digital AD4D/Q Receivers 1.2.34
  • Axient AXT600 Spectrum Manager 2.1.22
  • SBC240/840/840M Chargers 1.2.34
  • SBRC Shure Battery Rack Charger 1.1.5
  • Shure Update Utility 2.4.6
  • ShurePlus Channels 1.4.2
  • Wireless Workbench 6.13.1

Important

• Before ULX-D and QLX-D receivers can host or update ULXD6/8 firmware, update the devices to the following minimum versions:
  • ULXD4, ULXD4D, and ULXD4Q Receivers 2.1.16 or higher
  • QLXD4 Receivers 2.1.5 or higher

Improvements

• Support for additional RF bands:
  • Thailand 694 – 703 MHz frequency band (M19)
  • Thailand 748 – 758 MHz frequency band (Q12)
• Bug fixes

Notes

• User Guide
• To operate ULXD6/8 version 2.4.9 devices with other Shure networked systems and software, see the following list of minimum versions:
  • ULX-D ULXD1/2/6/8 Transmitters and ULXD4/4D/4Q Receivers 2.4.9
  • SBC250/450/850 Networked Charging Stations 2.3.6
  • QLX-D QLXD1/2 Transmitters and QLXD4 Receivers 2.3.8
  • Wireless Workbench 6.13.1
  • Shure Update Utility 2.4.6
  • ShurePlus Channels 1.4.2