Archiwum oprogramowania i firmware

Important

• Before upgrading Designer versions, it’s recommended to export project files to back them up.
• If you encounter an installer failure during upgrade, allow the uninstaller to finish, then restart installation.
• In order to push from virtual devices to online devices, or vice versa, the virtual device and online version must be on the same version. For example, new virtual devices created in Designer 4.3 are on version 4.3.X; those virtual devices can only be associated with online devices that are also on version 4.3.X.
• Designer 4.3 is not backwards compatible with earlier versions of Designer. The database will not be maintained upon downgrading, and Designer 4.3 files cannot be imported into earlier versions of Designer.
• Designer may not allow downgrading of some P300s due to a platform update to support future functionality and USB improvements.

Bug Fixes

• ‘System not available' screen shows when opening Designer depending on Microsoft VC++ Redistributable versions installed on the computer
• Installer error may occur if PowerShell is not available or is corrupted
• Microphone lobe does not hold on to last set position intermittently
• When saving and applying location presets in Live Mode, then attempting to export the project, export project will fail

Known Issues

• With more than 20 devices in location or 60 on the network, some actions will take longer due to increased network traffic.
• When a device is being firmware updated, it will disappear and reappear in Designer.
• When importing a Designer preset file into the MXA910 web application, attempts to immediately export that file out of the web application will fail if it is not first loaded and saved to the MXA910.
• When soloing a channel on an MXA310, all channels will show as gated on
• When one or more devices in a location are locked by Dante Domain Manager or Dante Device Lock, operations that affect Dante settings may be unreliable, such as audio routing, pushing virtual to online devices, or enabling audio encryption
• Changing channel count of virtual IMX-Room device does not reset audio settings
• When disassociating online devices from virtual devices multiple times, Optimize may not create expected routes; add new virtual devices and Optimize
• Indications that show on the bottom of the Coverage map page may persist longer than expected
• Forgetting a cross-subnet MXA910 on firmware version 4.1.41 may result in the device being rediscovered; close and re-open Designer or reboot device to see it as forgotten
• When factory resetting a device from Online Devices > Device window, then attempting to add that device to a Location that’s already open and initializing it, the Location and Device window will close; reopen to continue working
• Users with Astrill VPN installed will not be able to launch the app successfully; contact Shure support for help
• When using IntelliMix Room, Designer may show a red dot and invalid software version for that device after installation. Close and re-open Designer or reboot the machine running IntelliMix Room to fix the issue.
• Mute Sync will not work between P300 devices running version 4.2 and 4.3 firmware. Please make sure to update all P300s in a system to version 4.3

Notes

• Designer and SystemOn cannot be installed on the same machine
• Designer User Guide
• Designer 4.3.0 is compatible with the following software and firmware versions:
  • MXA910 4.3.2
  • MXA710 1.1.5
  • MXA310 4.3.6
  • IMX-Room version 2.0.2
  • P300 4.3.8
  • ANIUSB-MATRIX 4.3.11
  • MXN5-C 1.1.1
  • MXA-MUTE 1.1.3
• Requires 64-bit Windows 10
• Minimum system requirements have been updated; please see Designer User Guide

***** Update — February 10, 2021 *****

Version 6.14.0.186 is now available.

Improvements:

• Fixed an issue where certain date/time settings on a computer would invalidate scan file importing.
• Fixed an issue where the application was waiting for internet connection in order to import frequency list of spectrum scan data from AXT600 or P10T.
• Fixed an issue where some legacy TTi PSA2701 scan files would sometimes fail to import due to extra or missing characters.

If you have version 6.14.0.182 installed (as indicated on the splash screen during launch and on the About screen), please visit the WWB product page on Shure.com to download the latest version.

*****

New Features

• Added support for creating up to twelve custom Compatibility Profiles for any Equipment Profile.
  • Create from a new profile from scratch or duplicate an existing profile. Modify filter and spacing parameters. Export profiles to share with your team. Deploy frequencies to online or offline equipment in the inventory, even when they use custom Compatibility Profiles.
  • Improved Equipment Profile dialog with graphical user interface.
  • Coordination Workspace (CWS) files created in previous versions of the application are automatically converted upon import but must be saved using this version so that conversion is not required again.
• Added support to import third-party scan files generated by TTi, RF Explorer, and WinRadio scanners, and Sennheiser receivers.
  • Additional support for multi-sweep scan files from RF Explorer.
  • Continued support for importing scan data in .CSV and .TXT files where the data consists of frequency (decimal notation in MHz) and amplitude (decimal notation in dBm), separated by a comma.

New Device and Frequency Band Support

• Added support for viewing Q5X transmitter side-channel data in Axient Digital channel strips.
• Added support for new Shure frequency bands:
  • BLX G18 | 470.000 – 494.000 MHz
  • BLX L27 | 674.000 – 698.000 MHz
  • SVX G21 | 480.000 MHz – 492.000 MHz
  • SVX G22 | 492.000 – 504.000 MHz
  • SVX L21 | 630.000 – 642.000 MHz
  • SVX L22 | 642.000 – 654.000 MHz
  • SVX L24 | 666.000 – 678.000 MHz
  • SVX L25 | 686.000 – 698.000 MHz

Coordination 

• Updated the offline TV channel database for the following countries:
  • Australia – now includes VHF data
  • Hungary – post-700 MHz clearance
  • Germany – updated effective radiated power (ERP)
  • United States – post-600 MHz transition
• Fixed an issue where changes to the AXT600 Spectrum Manager scan settings were not affecting the device.
• Fixed an issue where the Effective Bandwidth Filter plot overlay was not updating after a custom Equipment Profile was edited and the frequency was removed and re-added to the Coordination Workspace (CWS).
• Fixed an issue where the Select All/Deselect All control in the Scan Sources table was being applied to all possible scan sources, even if the list was filtered using the search bar.
• Fixed an issue where the Coordination Workspace (CWS) plot was sometimes visually squashed after navigating to away from the Frequency Coordination tab, changing the size of the application window, and then returning to the Frequency Coordination tab.

Timeline

• Updated the default Timeline filename to include the date and time it was started instead of the time it was stopped.
• Fixed an issue so that Timeline files that are recovered after a crash now include the Timeline view name in the filename.
• Fixed an issue where Mini-Timeline widgets cannot be added to monitor views in certain scenarios.

General

• Supported on macOS 11.0 Big Sur. (Please note that support for Apple computers with M1 chips are not yet supported).
• Improved user interface for AD610 and AXT610 ShowLink access point properties panels.
• Improved user interface for AXT600 Spectrum Manager properties panels.
• Fixed an issue where the application sometimes crashed in the background when attempting to change an IP address while the application was already trying to close.
• Fixed an issue where devices on separate subnets of a network configured for multicast traffic would be discovered inconsistently. It is also recommended to use the Remote Device Connection feature to manage cross-subnet communication.
• Fixed an issue where the link icon for ShowLink-capable transmitters is sometimes not visible in the corresponding receiver’s properties panel.
• Fixed an issue where scans can be started or stopped when the application is in Monitor Only Mode.
• Fixed an issue where ShowLink status was not presented in monitor widgets in certain scenarios.
• Fixed an issue where the Settings Conflict dialog was not triggered for Axient Digital and Axient receivers at the time a Show File was loaded if the receiver was simultaneously experiencing interference.
• Fixed various minor user interface issues to improve text visibility.

Known Issues

• ULX-D receivers running firmware version 2.0.28 or earlier may trigger a Settings Conflict when rediscovered after updating their firmware to version 2.1 or later. There is no issue with the device—there was simply a new property added in version 2.1. To dismiss the alert, resolve the Settings Conflict by selecting the properties you wish to keep.
• The Timeline System Event “Active Transmitter Online” for ULXD6/8 transmitters does not always include Transmitter Device ID in the event description.
• Mac computers with i5 processors running Timeline may experience an application crash after an indeterminate period of time. A resolution is being investigated.
• SLX and ULX frequencies in Master List mode cannot be manually entered in the Coordination Workspace. They can, however, be coordinated and analyzed.

Notes

• To operate Wireless Workbench successfully, you must run it as an administrator. This includes when updating from within the application using version 6.13.1 or prior. Consult your IT department if you have questions about enabling administrator permissions on your computer.
• Opening show files created with older versions of Wireless Workbench may result in the Settings Conflicts dialog opening once the file has loaded. This is due to newly supported hardware parameters that have been introduced with updated firmware versions. To maintain all settings from the show file, select "Keep all settings from: Wireless Workbench."
• Alerts logged when devices first come online may list device parameters and their values as they are being discovered even though the parameter values themselves have not changed.

Important

• After upgrading SystemOn, clear your browser cache on the device accessing the SystemOn server, then re-assign your licenses to your devices by navigating to your organization > Licenses > Start managing
• SystemOn cannot be installed on the same machine as Designer; do not attempt to install one over the other
• Before updating firmware, turn off “Device Missing” notifications, then turn them back on after completing the firmware updates
• SystemOn may not allow downgrading of some P300s due to a platform update to support future functionality and USB improvements.

Improvements

• Support for new firmware versions
• Usability improvements
• Bug fixes and performance improvements

Known Issues

• When using a virtual machine, it’s recommended to dedicate hardware resources (HD, RAM, etc.) to the SystemOn application; using shared resources may cause Shure services to not start on reboot
• When a device is being firmware updated, it will appear offline during the update in SystemOn
• When marking a notification as read, the notifications list may flicker
• ULX-D transmitters using non-Shure batteries will show in the transmitter list with incorrect values for battery cycle count and health
• After attempting to forget cross-subnet devices, devices must be rebooted, then SystemOn server must be rebooted before the devices will disappear from SystemOn
• Discovering MXW microphones may take more than 1 minute
• UTC time and date are displayed on Event Log and Email/SMS notifications.
• For users setting up SMS notifications, the Senders Phone Number field does not show the required (*), but the field is required.
• If a valid license activation ID is applied and fails on the first attempt, please try again before calling support.

Notes

• Internet access is no longer required during the installation process; however, use of certain features like firmware updating and text notifications require internet access
• Designer and SystemOn cannot be installed on the same machine
• To operate SystemOn 4.3.0 with Shure networked systems, see the following list of supported firmware versions:
  • MXW 8.0.3 – 9.0.4
  • SCM820 1.3.3
  • ULX-D 2.2.24 – 2.4.9
  • SBC220/240 1.1.43 – 1.2.73
  • SBC250/450/850 2.2.24 – 2.4.13
  • MXA910 4.1.41 – 4.3.2
  • MXA710 1.1.5
  • MXA310 4.1.37 – 4.3.6
  • P300 4.1.11 – 4.3.7
  • IMX-ROOM 1.0.4.2 – 2.0.2
  • ANIUSB-MATRIX 4.1.39 – 4.3.11
  • MXN5-C 1.1.1
  • MXA-MUTE 1.1.3
• Please report SystemOn performance issues experienced on supported browsers to Shure Support.
• For help and troubleshooting, go to the SystemOn System Requirements, SystemOn User Guide or FAQs

Important

• Before upgrading Designer versions, it’s recommended to export project files to back them up.
• If you encounter an installer failure during upgrade, allow the uninstaller to finish, then restart installation.
• In order to push from virtual devices to online devices, or vice versa, the virtual device and online version must be on the same version. For example, new virtual devices created in Designer 4.3.0 are on version 4.3.0; those virtual devices can only be associated with online devices that are also on version 4.3.0.
• Designer 4.3 is not backwards compatible with earlier versions of Designer. The database will not be maintained upon downgrading, and Designer 4.3 files cannot be imported into earlier versions of Designer.
• Designer may not allow downgrading of some P300s due to a platform update to support future functionality and USB improvements.

Improvements

• Support for new firmware versions
• Export virtual MXA910 and MXA310 as preset file
• Installer bug fixes
• Usability improvements
• Bug fixes and performance improvements

Known Issues

• With more than 20 devices in location or 60 on the network, some actions will take longer due to increased network traffic.
• When a device is being firmware updated, it will disappear and reappear in Designer.
• When importing a Designer preset file into the MXA910 web application, attempts to immediately export that file out of the web application will fail if it is not first loaded and saved to the MXA910.
• When soloing a channel on an MXA310, all channels will show as gated on
• When one or more devices in a location are locked by Dante Domain Manager or Dante Device Lock, operations that affect Dante settings may be unreliable, such as audio routing, pushing virtual to online devices, or enabling audio encryption
• Changing channel count of virtual IMX-Room device does not reset audio settings
• When disassociating online devices from virtual devices multiple times, Optimize may not create expected routes; add new virtual devices and Optimize
• Indications that show on the bottom of the Coverage map page may persist longer than expected
• Forgetting a cross-subnet MXA910 on firmware version 4.1.41 may result in the device being rediscovered; close and re-open Designer or reboot device to see it as forgotten
• When factory resetting a device from Online Devices > Device window, then attempting to add that device to a Location that’s already open and initializing it, the Location and Device window will close; reopen to continue working
• Users with Astrill VPN installed will not be able to launch the app successfully; contact Shure support for help
• When using IntelliMix Room, Designer may show a red dot and invalid software version for that device after installation. Close and re-open Designer or reboot the machine running IntelliMix Room to fix the issue.
• Mute Sync will not work between P300 devices running version 4.2 and 4.3 firmware. Please make sure to update all P300s in a system to version 4.3

Notes

• Designer and SystemOn cannot be installed on the same machine
• Designer User Guide
• Designer 4.3.0 is compatible with the following software and firmware versions:
  • MXA910 4.3.2
  • MXA710 1.1.5
  • MXA310 4.3.6
  • IMX-Room version 2.0.2
  • P300 4.3.7
  • ANIUSB-MATRIX 4.3.11
  • MXN5-C 1.1.1
  • MXA-MUTE 1.1.3
• Requires 64-bit Windows 10
• Minimum system requirements have been updated; please see Designer User Guide

Important

• Shure Update Utility 2.5.0 no longer supports 32 bit.
• Shure Update Utility 2.5.0 no longer supports GLX-D, KSE1500, SHA900, and UHF-R
  • Please use Shure Update Utility 2.4.8 to update these devices and for 32bit support.

New Features

• IP Address Column: An additional column to the device list has been created to allow users to view the IP address of each device for easier management.
• Device Header Column: The header column for each device model is now able to be expanded or collapsed by a double click.

Improvements

• Enhanced UI performance, stability, and bug fixes.
• Added support for new frequency bands:
  • Axient Digital
    • China: 630.125 - 697.875 MHz frequency band (L60)
  • PSM1000
    • China: 470.125 - 509.875 MHz frequency band (G53)
    • China: 630.125 - 697.875 MHz frequency band (L60)
  • ULX-D
    • China: 470.125 - 509.875 MHz frequency band (G53)
  • QLX-D
    • China: 470.125 - 509.875 MHz frequency band (G53)

Known Issues

• PSM1000 devices with firmware version 1.1.0 or earlier must use Shure Update Utility version 2.4.1 or older.
• Version 2.4.1
  • 32-bit Windows 7, 8, 10
  • 64-bit Windows 7, 8, 10
  • 64-bit Mac OS X 10.10-10.12
  • Previous Versions
• Selecting "Help" > “Check for Shure Update Utility updates" will open Shure.com, which offers the latest version of Shure Update Utility to download. Shure Update Utility version 2.4.2 or greater will not automatically detect new versions.
• Attempts to download ULXD6/8 transmitter firmware to a ULX-D or QLX-D receiver that is not at the minimum firmware version, shown below, will fail. To update firmware for ULXD6/8 transmitters with ULX-D or QLX-D receivers:
  • Update receivers to the following minimum versions:
    • ULXD4, ULXD4D, ULXD4Q Receivers 2.1.16
    • QLXD4 Receivers 2.1.5
  • Using Shure Update Utility, download ULXD6/8 transmitter firmware to the receivers.
  • Using the FW Update menu on a receiver, update transmitters.
• Microflex Wireless devices running version 1.X firmware must first be updated to version 2.0.5 before being updated to version 3.X or later.

Notes

• Shure Update Utility is supported on the following operating systems:
  • Windows 7, 8 and 10
  • Mojave (10.14), and Catalina (10.15)

Initial Release

Notes

• MV7 User Guide
• Compatible with macOS Mojave, High Sierra and Catalina, and 64-bit versions of Windows 7, 8 and 10
• ShurePlus MOTIV is compatible with the following firmware versions:
  • MV7 1.1.0
  • MV88+ 1.1.4.1

Bug Fixes

• Resolved issues regarding network errors encountered during computer power up that could prevent IntelliMix Room from starting up correctly and being discovered in Designer software
• Resolved issues regarding demo licenses becoming deactivated without persistent internet connection for 7 days.
• Resolved issues where IntelliMix Room could not be discovered for up to 5 minutes after the IntelliMix Room host computer was restarted without internet access.
• Resolved issues where improper prompts were shown to the user when attempting to activate an IntelliMix Room endpoint with a license ID without enough available licenses.

Known Issues

• Packet scanning security software may cause audio performance issues with IntelliMix Room.
• Presets saved while using IntelliMix Room 2.x or later cannot be used with IntelliMix Room 1.0.4.2.
• In order to transition from a trial license to a paid license before trial expiration, the IntelliMix Room endpoint must be deactivated and reactivated. Otherwise, the entire trial license term will be used before the paid license.
• When using Dante Domain Manager (DDM) and the configuration for the device is set to “prevent” or the DDM server is offline, you can still upgrade IntelliMix Room.
• Changing the System Name of the host computer after installation of IntelliMix Room also changes the Dante Device name in Dante Controller. The Shure device name stays the same. This does not affect device performance and can be ignored.
• Ensure that the system/device name of the computer running IntelliMix Room is unique and follows Microsoft’s recommendation of 15 characters or less. IntelliMix Room relies on this unique name for proper Shure and Dante network operation.
• IntelliMix Room occasionally uses more resources on Dell XPS Laptops.
• Certain Bluetooth devices may not persist in the PC Input/Output device dropdown selection after a restart of the computer. Audio will still pass.
• If you adjust certain networked audio properties (networked audio device name, encryption state, license channel count), IntelliMix Room briefly goes offline in Designer.
• In some scenarios, the computer running IntelliMix Room must be rebooted after a Zoom Rooms update occurs on the same computer.
• If using the built-in Realtek driver for a PC input or output device in IntelliMix Room, you may need to reselect the PC input or output device after updating the Realtek driver. Realtek drivers are commonly included in Windows updates.
• In some scenarios where PowerShell is not configured properly on a computer, IntelliMix Room will fail to install and warn the user that there no solid-state drive (SSD) detected, even if the system drive is an SSD. If this occurs, confirm PowerShell is listed in your system “PATH” environment variables and retry the installation.
• In some scenarios, an asterisk will appear next to the version number of IntelliMix Room in Designer Software. This does not impact functionality of either piece of software and can be ignored.

Notes

• User Guide
• Installation and Deployment Guide
• Quick Start Guide
• IMX Room 2.0.2.11 is compatible with the following software and firmware versions:
  • Designer 4.3
  • MXA910 4.3.2
  • MXA310 4.3.6
  • MXA710 1.1.5
  • MXA Mute 1.1.3
  • P300 4.3.7
  • ANIUSB-MATRIX 4.3.11
  • ANI22 4.3.7
  • ANI4IN 4.3.7
  • ANI4OUT 4.3.7
  • Microflex Wireless 9.0.4

Important

• After upgrading SystemOn, clear your browser cache on the device accessing the SystemOn server, then re-assign your licenses to your devices by navigating to your organization > Licenses > Start managing
• SystemOn cannot be installed on the same machine as Designer; do not attempt to install one over the other
• Before updating firmware, turn off “Device Missing” notifications, then turn them back on after completing the firmware updates

Improvements

• Support for new products:
  • IntelliMix® Room Audio Processing Software
  • MXA710 Linear Array Microphone
  • MXN5-C Networked Loudspeaker
  • MXA Network Mute Button
• Support for new firmware versions
• Support for same-subnet and cross-subnet firmware updating of the following products:
  • ​MXA910
  • MXA710
  • MXA310
  • P300
  • ANIUSB-MATRIX
  • MXN5-C
  • MXA-MUTE
• License widget on dashboard
• UI improvements

Known Issues

• When using a virtual machine, it’s recommended to dedicate hardware resources (HD, RAM, etc.) to the SystemOn application; using shared resources may cause Shure services to not start on reboot
• After attempting to forget cross-subnet devices, devices must be rebooted, then SystemOn server must be rebooted before the devices will disappear from SystemOn
• Discovering MXW microphones may take more than 1 minute
• UTC time and date are displayed on Event Log and Email/SMS notifications.
• For users setting up SMS notifications, the Senders Phone Number field does not show the required (*), but the field is required.
• If a valid license activation ID is applied and fails on the first attempt, please try again before calling support.

Notes

• To operate SystemOn 4.2 with Shure networked systems, see the following list of supported firmware versions:
  • MXW 8.0.3 – 9.0.4
  • SCM820 1.3.3
  • ULX-D 2.2.24 – 2.4.9
  • SBC220/240 1.1.43 – 1.2.73
  • SBC250/450/850 2.2.24 – 2.4.9
  • MXA910 4.1.41 – 4.2.18
  • MXA710 1.0.5
  • MXA310 4.1.37 – 4.2.18
  • P300 4.1.11 – 4.2.4
  • IMX-ROOM 1.0.4.2 – 2.0.1.186
  • ANIUSB-MATRIX 4.1.39 – 4.2.19
  • MXN5-C 1.0.6
  • MXA-MUTE 1.0.8
• Please report SystemOn performance issues experienced on supported browsers to Shure Support.
• For help and troubleshooting, go to the SystemOn System Requirements, SystemOn User Guide or FAQs

Release notes cover the following models:

• MXC605
• MXC605-F
• MXC615
• MXC620/620-F
• MXC630/630-F
• MXC640
• MXCIC
• MXCMIU
• MXCSIGN
• DIS-CCU
• DC5900F
• DC5980P

Important

• This firmware release can be used to update Microflex Complete (MXC) or DCS 6000 systems using DIS-CCUCentral Unit and to update DC5900F and DC5980P to register and work in an MXC system.
• Systems using CU 5905, CU 6000, CU 6005, CU 6010, CU 6011, CU 6105, or CU 6110 Central Units are not supported in this release.
• The Firmware Update Utility (FUU) included in this release, is required for the update.

New Features

• This is a hotfix – no new features. Refer to release note for Release 9.0.0 for description of new features.

Bug Fixes

• Incorrect Default CCU-database when upgrading a former 5900-system (2000 m cable instead of default 1000m) leading to communication problems using short feeding cables.
• Updating of CCU from 8.6.2 (in 5900-mode) must force 6000-mode LAN configuration

Known Issues

• Refer to the release notes for Release 9.0.0 for description of known issues.

Notes 

• MXC and DCS 6000 firmware files are packaged together in the same release file.
• To operate MXC devices with version 9.0 with other Shure networked systems, see the following list of minimum software and firmware versions:
  • SW6000 9.0.13
  • Shure NFC Programming App 1.0.3

Important

• If you encountered any issues upgrading to version 4.2.0, please contact Shure support for recovery instructions before installing version 4.2.1
• Before upgrading Designer versions, it’s recommended to export project files to back them up
• If you encounter an installer failure during upgrade, allow the uninstaller to finish, then restart installation
• When upgrading Designer versions, the installer may prompt that the destination folder is not empty; please change the folder name or delete the existing folder and it will automatically be re-created during the upgrade.
• In order to push from virtual devices to online devices, or vice versa, the virtual device and online version must be on the same version. For example, all new virtual devices created in Designer 4.2 are on version 4.2.X; those virtual devices can only be associated with online devices that are also on version 4.2.X.
• Designer 4.2 is not backwards compatible with earlier versions of Designer. The database will not be maintained upon downgrading, and Designer 4.2 files cannot be imported into earlier versions of Designer.

Improvements

• Fixes for upgrading from previous production versions to 4.2.1; if any issues were encountered during upgrade, contact Shure support for recovery instructions
• Fix for device discovery issues caused by delayed NIC initialization on PC

Known Issues

• With more than 20 devices in location or 60 on the network, some actions will take longer due to increased network traffic.
• When importing a Designer preset file into the MXA910 web application, attempts to immediately export that file out of the web application will fail if it is not first loaded and saved to the MXA910.
• When typing in certain fields, the value may be overwritten if not entered quickly
• When soloing a channel on an MXA310, all channels will show as gated on
• When configuring a single MXA910, rotation of the device will only appear in Location > Coverage Map; go to the location to view the rotated device
• When one or more devices in a location are locked by Dante Domain Manager or Dante Device Lock, operations that affect Dante settings may be unreliable, such as audio routing, pushing virtual to online devices, or enabling audio encryption
• Changing EQ Contour on the MXA710 does not affect active preset indication
• Changing channel count of virtual IMX-Room device does not reset audio settings
• When disassociating online devices from virtual devices multiple times, Optimize may not create expected routes; add new virtual devices and Optimize
• Indications that show on the bottom of the Coverage map page may persist longer than expected
• Forgetting a cross-subnet MXA910 on firmware version 4.1.41 may result in the device being rediscovered; close and re-open Designer or reboot device to see it as forgotten
• When factory resetting a device from Online Devices > Device window, then attempting to add that device to a Location that’s already open and initializing it, the Location and Device window will close; reopen to continue working
• The uninstaller for Designer is not signed
• Users with Astrill VPN installed will not be able to launch the app successfully; contact Shure support for help
• When using IntelliMix Room, Designer may show a red dot and invalid software version for that device after installation. Close and re-open Designer or reboot the machine running IntelliMix Room to fix the issue.
• Certain browser extensions may cause SystemOn to show a message that says “System Unavailable”. If you see this message, please disable your browser extensions.

Notes

• Internet access is required during the installation process
• Designer User Guide
• Designer 4.2.1 is compatible with the following software and firmware versions:
  • MXA910 4.2.18
  • MXA710 1.0.5
  • MXA310 4.2.18
  • IMX-Room version 2.0.1
  • P300 4.2.4
  • ANIUSB-MATRIX 4.2.19
  • MXN5-C 1.0.6
  • MXA-MUTE 1.0.8
• Requires 64-bit Windows 7 or 10
• Minimum system requirements have been updated; please see Designer User Guide